Windows 7 Deployment FOG- SAD2 Driver tool
-
[B]Step 9: FOG service and sysprepping/fogprepping[/B]
[B][/B]
Now the final steps should be to:- Install the FOG service, navigate to:
[url]http://fogserver/fog/client/[/url]
And install the FOG client service. [BE SURE TO REPLACE YOUR “Hostnamechanger.dll” or your machine won’t rename and add to domain after imaging". Replace this after FOG client is installed. - Download and Run “FOG Prep”- This is important for uploading windows 7 machines.
[IMG]http://i1127.photobucket.com/albums/l629/Andrew_Hingston/36.png[/IMG]
The virtual image almost ready to upload to FOG. The last step is to run the system preparation too. If you closed it you can access it in:
C:\Windows\System32\sysprep\sysprep
[IMG]http://i1127.photobucket.com/albums/l629/Andrew_Hingston/37.png[/IMG]
Before doing the below, I strongly suggest to take a snapshot! It’s likely you will want to re-upload the image many times before you are happy with it. Plus you can then easily add updates/changes from that snapshot position.
Have the cleanup action to go into OOBE mode, and tick generalize. Set the shutdown option to “shutdown”, then hit OK. Sysprep will start working. Once finished the machine will then shutdown. Now the next time it powers on we want to upload FOG before windows starts again. You can also take a snapshot before you run sysprep and then let it reboot without capturing it, to make sure everything works on the next boot up before uploading it to FOG.Step 10: Creating the image in FOG
Select “Image management” in the FOG console. Then choose “new image”. Name the image-and select “Single Partition” (NTFS Only, Resizable).
[IMG]http://i1127.photobucket.com/albums/l629/Andrew_Hingston/38.png[/IMG]Now go to your host and reference the newly made host image to your registered host machine.
[IMG]http://i1127.photobucket.com/albums/l629/Andrew_Hingston/39.png[/IMG]
Then choose “Basic Tasks” from the menu to the left. Choose “upload Image”>“Upload image”. The task will start. Fog will automatically resize the partition for upload.
Now you just need to turn your virtual machine back on, and hit F12 to ensure it network boots. If it PXE boots then FOG will grab the image and upload it! If windows starts then you have not successfully PXE booted and you need to return to your snapshot- and re run sysprep. My Final image size was approx 10GB.
You are finished!
[IMG]http://i1127.photobucket.com/albums/l629/Andrew_Hingston/40.png[/IMG]
That’s pretty much it. Now you can deploy the image to other psychical machines by the standard process. Thanks to the SAD2 tool drivers are a breeze, that said, Windows 7 and Sysprep will handle the majority of the essential drivers, but it’s nice to get the correct drivers from SAD2.
I have deployed this on many machines. Most recent machine I was testing was a Lenovo desktop, CPU i5 quad, 4GB ram, onboard graphics and I put an SSD in it and it imaged in two minutes dead (I tried another with the original mechanical drive, and it managed two minutes- five seconds)… It finished the windows deployment in another 2 minutes approx. It auto logged on and deployed SAD2 and installed drivers in around 4 minutes, then rebooted, joined the domain and renamed. All up it was probably done in around 15 minutes max.
I hope this guide will help you in some small way. I don’t think it’s possible to make a ‘one guide fits all’ for win 7 deployment, because there are just so many variables, but I hope this might help get you started. Thanks for reading!Please feel free to comment etc below.
- A. Hingston 2012
- Install the FOG service, navigate to:
-
great article, I myself have been going through similar process based on this guide [URL=‘http://blog.ibuddy.info/index.php/2011/05/fog-29-my-windows-7-guide-3264-bit-docv1/’]http://blog.ibuddy.info/index.php/2011/05/fog-29-my-windows-7-guide-3264-bit-docv1/ [/URL](just what you have done but with VirtualBox) my next stage was to look into the automation of drivers, which you have covered.
Thanks for sharing
will definitely help me and others, a few of my new machines network cards are not detected by Win 7 so cannot auto join domain until I manually installed the driverUPDATE: just implemented this into a test image, and it works great, now it will install missing NIC driver and allow fog to continue with AD joining. Cheers
-
Hi Falko,
I hope it can help you out, if you have problems just ask and I will help if I can! I might clean up the formatting in this thread tomorrow and I will no doubt make changes/additions as I continue to test this into the future.
-
Now that’s a great guide. good job Andyroo45.
-
Great guide Andy. I’ve found this site as well that could help with creating the unattend.xml file. Might work for some, and def save some headaches
[url]http://www.bauer-power.net/2011/02/how-to-sysprep-windows-7-on-easy.html[/url] -
Hi Kevin thanks, and yes any resources, the more the better. No one guide for this will be perfect, especially the XML as it so customizable . And I encourage others if they use this guide to post their results, and suggest changes if they see fit.
-
Thank you very much, andyroo54!
Although I haven’t read the whole document, I’m sure it will help. -
This post is deleted! -
This post is deleted! -
There will be some small updates to this, I’ve found that if FOG is installed before syspep then while the DP install tool is running it can cause the machine to restart in order to rename/join to domain. I will update tonight with my solution.
-
[quote=“andyroo54, post: 1849, member: 267”]There will be some small updates to this, I’ve found that if FOG is installed before syspep then while the DP install tool is running it can cause the machine to restart in order to rename/join to domain. I will update tonight with my solution.[/quote]
I haven’t had this issue when testing, I thought FOG is only meant to restart when no user is logged in?
-
Thanks for the guide, i have 3 days to learn to create and deploy a windows 7 image and this is helping a great deal. Am i missing something though? You said in the guide you get the to entering the correct install key? I cant see that part anywhere.
Also If all the keys are different how does activation work? I have 7 new Windows 7 machines that are factory sysprepped but i want to windows update them and install company specific software and then sysprep again ready for FOG deployment.
-
Activation should be done by the KMS server (assuming you are using a volume license server). Otherwise you will need to hand-activate all the machines or use something like the opa tool - [url]http://forums.mydigitallife.info/threads/28649-OpaTool-updated-v0-8[/url] (again… YOU MUST KEEP YOUR LICENSES STRAIGHT! IF YOU ARE LICENSED FOR PRO, LOAD PRO, etc.) I’m not condoning piracy here… use your head people.
thx.
-
What i meant to say is, each of my PCs have their own key on the case label. They have a factory image on at the moment as in when they boot up it goes through the sysprep steps and is activated automatically. so i dont fully understand which key i would use in sysprep to get them to activate. I could go round after each machine has been imaged and enter the key on the case but that kinda defeats the point of an automated system. XP was so much easire o_O
-
[quote=“Mike Mcloughlin, post: 1955, member: 187”]What i meant to say is, each of my PCs have their own key on the case label. They have a factory image on at the moment as in when they boot up it goes through the sysprep steps and is activated automatically. so i dont fully understand which key i would use in sysprep to get them to activate. I could go round after each machine has been imaged and enter the key on the case but that kinda defeats the point of an automated system. XP was so much easire o_O[/quote]
Hi Mike,
Glad you are finding it useful, but as ssx4life says the only way to make that part automated is use a license server, there really isn’t anyway for this process to grab the product key automatically, because the only place it exists is stuck onto the side of your pc. At some point you would have to type it in anyway, so why not just once the PC is imaged and you are checking it over.
There could be a way to manually enter the key during sysprep, if you removed that option from the unattend.xml file. But I wouldn’t suggest that. You are better off doing as I detailed in the guide:
"You can put a dummy product key in to make sure it skips this during setup. [B]You can set the real license key later.[/B] A full list of keys is below.
Operating System Edition
Product Key
Windows 7Windows 7 Professional
FJ82H-XT6CR-J8D7P-XQJJ2-GPDD4"Note, these are [B]NOT[/B] pirate license keys, they are provided by Microsoft to make the process unattended. Windows will SKIP activation using this key, but it will not auto activate, so you will have 30 days to enter the real product key.
For me, I always check a PC over anyway while it is installing snapins. It’s not too hard to enter the product key then. Especially because 7 PC’s is not a lot really. It might be annoying, but just think of the time an unattended install will save you!
[quote=“Mike Mcloughlin, post: 1949, member: 187”]
I have 7 new Windows 7 machines that are factory sysprepped but i want to windows update them and install company specific software and then sysprep again ready for FOG deployment.[/quote]So in your case, the best thing to do would be to get one of the machines, (don’t bother with a virtual, it will be faster with a psychical PC and since you are deploying to the same machines it will make more sense).
1)Fresh install windows 7, and then launch it into audit mode from the start of setup as detailed above,
2)Install any MS windows updates you need to,
-
Install any company software you need, if you are not going to use snapins,
-
In your case, if you are in a rush, and they are all the same hardware, I would just update the drivers in this master image, and not worry about the SAD DPinstall tool. That way the other machines you deploy to will have the correct drivers already.
5)Make any other changes you want to the OS, local user accounts, etc etc.
- Use an unattended.xml file as detailed above to make the deployment unattended.
7)Then start the sysprep, and then upload it to FOG as it reboots.
- Make sure you don’t activate Windows with a key before you upload it, you will need to do that after you have deployed it to all your machines.
Hope this helps.
-
-
[quote=“falko, post: 1907, member: 48”]I haven’t had this issue when testing, I thought FOG is only meant to restart when no user is logged in?[/quote]
Well I have this problem, and it was annoying! My work is evacuated all this week due to floods and I can’t remote in due to telecommunications dropped out, so I can’t show my modified script, I will post it when I can but this is what I did:
Image before sysprep, before fog upload
1)Removed fog
2)To the DPInstalltool.cmd script, at the end of the drivers installation before the script exits, I added a command to silently install FOG, then I let the script sleep a bit using PING ( I found that SLEEP.exe wouldn’t run when it was being called by the setupcomplete.cmd script, very strange).
-
Then I got the script to move the “hostnamechanger.dll” to the Fog directory.
-
Then I got the script to clean up the SAD folders and delete all the drivers and D folder, and then restart the machine with a 30 second warning.
This took a little bit of testing playing around to get it right, but it appears fine now. Again I will update the guide+this thread when I can.
Thanks,
-
-
Best Regards!!
Works very good!! Best Tutorial!
Thank you andyroo54 -
cheers for the update, any chance of updating to the latest DP Tool?
-
Thanks andyroo54 for your guide. I have used most of your guide but added my own bit at the end which some people may be interested in.
Loved the idea of the SAD2 for drivers but to keep image size down and to add drivers without having to update the image I did the following. I injected all Windows 7 ethernet drivers from driverpacks into my image when offline before uploading to FOG only adding around 200mb to the image file using dism inject see [url]http://www.fogproject.org/wiki/index.php?title=Create_a_windows_7_image_for_many_different_hardware[/url] (near the end) for more details.
I then used your script to call SAD2 but from a network location on first boot using the setup scripts, so instead of START C:\Drivers\SAD2-111118\DP_Install_Tool.cmd I used START [URL=‘http://fogproject.org/forum/file://nas/Drivers/SAD2-111118/DP_Install_Tool.cmd’]\nas\Drivers\SAD2-111118\DP_Install_Tool.cmd[/URL] . I setup a basic share with no authentcation on my NAS so any machines could read the files. If I ever need to update the driverpacks I can do all of this without ever touching the image. Hope this helps someone.
Cheers
Bob
-
[QUOTE]
[INDENT=1]There will be some small updates to this, I’ve found that if FOG is installed before syspep then while the DP install tool is running it can cause the machine to restart in order to rename/join to domain. I will update tonight with my solution.[/INDENT]
[/QUOTE]I also found this problem but added to the start of the DP_Install_Tool.cmd, Net stop “Fog Service” which will prevent the machine from restarting before it installs all drivers needed and then added "net start “Fog Service” to the end of the script to start fog again which then within seconds renames and reboots the machine. Its working very well for me. Thanks again to andyroo54
