langage de programmation

[george1421]

@julio I was thinking something like this:

#!/bin/bash
. /usr/share/fog/lib/funcs.sh
[[ -z $postdownpath ]] && postdownpath="/images/postdownloadscripts/"
case $osid in
    5|6|7|9)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    ntfsstatus="$?"
                    if [[ ! $ntfsstatus -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/windows && ! -d /ntfs/Windows && ! -d /ntfs/WINDOWS ]]; then
                        echo "Not found"
                        umount /ntfs >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not NTFS filesystem"
                    ;;
            esac
        done
        if [[ ! $ntfsstatus -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        . ${postdownpath}fog.copydrivers
        # . ${postdownpath}fog.updateunattend
        umount /ntfs
        ;;
   50)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    ntfsstatus="$?"
                    if [[ ! $ntfsstatus -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/etc ]]; then
                        echo "Not found"
                        umount /ntfs >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not linux root filesystem"
                    ;;
            esac
        done
        if [[ ! $ntfsstatus -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        # at this point the root file system will be mounted on /ntfs
        . ${postdownpath}fog.renamehost.sh
        umount /ntfs
        ;;
    *)
        echo "Unknown OS Deployment"
        debugPause
        return
        ;;
esac

Understand I did not test this code at all. This code may be more complex than you need if only you set the hostname. The script you have will work if you fix what Sebastian posted about your mount command. I just wanted to show you that you can make the core more responsive if your root partition is not always /dev/sda1. In some cases like UEFI disk format /dev/sda1 is the UEFI boot partition and not the OS root partition. Your code would fail if that was the case. Or if your hard drive is a NVMe type then /dev/sda (points to sata) would be wrong and the script would fail because nvme disk have a different partition structure.

[julio]

@sebastian-roth oui j’ai modifier mon fichier mais jusque là pas de changement au niveau du hotsname. mount /dev/sda1 /ext

[julio]

@george1421 en passant george je travail sur des VM sur virtualbox et lors de la création de mon pc ubuntu desktop, j’ai partitionner mon dique dur virtuel. es ce cela le problème.

[julio]

@george1421 oui george, voici à quoi ressemble ma partition sur la machine cliente ubuntu.

[george1421]

@julio said in langage de programmation:

en passant george je travail sur des VM sur virtualbox et lors de la création de mon pc ubuntu desktop, j’ai partitionner mon dique dur virtuel. es ce cela le problème.

No works the same. I was just warning if you use real hardware that it could change the way your script runs because hardware changes.

[julio]

@george1421 juste pour me rassurer, je ne vais pas par hasard modifier mon fichier host…

[george1421]

@julio I will give you a hint to maybe help you with your scripting.

FOG has a special mode you can use to debug your programs right on the target computer. So do the following.

1. Register your VM with fog (if you have not done so already)
2. Schedule a new deployment task, but before you press the Schedule Task button, enable the Debug checkbox, then schedule the task.
3. PXE boot the target computer.
4. After several screens of text, you can clear by pressing the ENTER key. You will land on the FOS LINUX command prompt.

Now run lsblk to find your hard drive. See if you can find from lsblk your root partition.

Now manually run

mkdir -p /ntfs
mount /dev/sdaX /ntfs

Just as a test run the echo command the variable ${hostname} will not be set yet so you can’t use it here. But you can find out the right location and partition to use. You will not see all of the loop devices that ubuntu creates so it will be clear what partitions you want.

[george1421]

@julio said in langage de programmation:

juste pour me rassurer, je ne vais pas par hasard modifier mon fichier host…

This is why I suggested to test your program using FOS Linux in debug mode. No chance to break your FOG server.

[julio]

@george1421 j’essaye ça et je te tiens au courant merci beaucoup.

[Sebastian Roth]

@julio When you added the echo "OK, osid is 50/Linux" into your script, did you see that message on the console??

You might want to add the mentioned read command as well so it waits for your input…

[julio]

@sebastian-roth salut roth. non je ne vois rien sur la console de mon serveur fog apparement le script ne fonctionne pas. je veux bien savoir.
comment verifier que le script est bien fonctionnel???
j’ai bien donner les droits d’execution à savoir chmod +x renamehost.sh

[julio]

@george1421 salut george. oui j’ai fais ce que tu m’as démander mais je n’arrive pas sur l’invite de commande de fos linux. y’a t’il pas une autre manière???

[george1421]

@julio OK give me 5 minutes and I will give you more hints.

[george1421]

@julio To get into debug mode on the pxe booting computer make sure you enabled debug mode.

See the Schedule as debug task option? When you do this and pxe boot the target computer you will end at the FOS Linux command prompt.

In your script for debugging purposes you should add

echo "Some step in the script"
debugPause;

This way you will know when and where your script is in the program. I add these quite often at specific points in my scripts.

Also make sure you add your script like fog.custominstall or renamehost.sh to the master script of fog.postdownload or your script will not be called by fog.

IF you are ready to debug your script AND you are at the FOS Linux command prompt key in fog to start the deployment. The FOG deployment will stop at all of the debugPause commands during deployment. Press enter to go to the next step. When / IF you get to see OK, osid is 50/Linux on the screen and you see a bug you can press CTRL-C to exit the script. The FOG Postinstall scripts are run right after the last partclone copy screen. You can fix what you need then restart the deployment process again by typing fog in again. You can do this testing as many times as you want without needing to reboot the pxe target computer.

[julio]

@george1421
j’ai reussi à entrer dans la partition de debogage. j’ai executer la commande lsblk. voici ce que j’obtient.

[julio]

@george1421 salut george. j’ai eu une erreur qui s’affiche on me precise syntax error. donc le script essaye de s’executer mais petite erreur. voici l’image en question

[julio]

@sebastian-roth oui roth j’ai vu ou il y’a erreur: c’est au niveau de la ligne5 dans mon code: ici

if [[“$osid”==“50”]]; then ça me dire sysntax error. juste pour vous donner un indice.

[george1421]

@julio said in langage de programmation:

’ai reussi à entrer dans la partition de debogage. j’ai executer la commande lsblk. voici ce que j’obtient

Ok I see only one partition then /dev/sda1. Now you know what your target partition is.

donc le script essaye de s’executer mais petite erreur.

Here is an example of my if/then

        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi

When you look at your if / then statement do you see any differences? How about spacing?

[julio]

@george1421 voici mon script final

[george1421]

@julio You MUST look at the if statement. It is wrong.

if[[ $osid == 50 ]];then

Should be rewritten as

if [[ $osid == "50" ]]; then