@wayne-workman said in Resetting the Image numbers r4602:
SELECT imageID FROM images ORDER BY imageID LIMIT 1;
Can I just say thank you for this.
@wayne-workman said in Resetting the Image numbers r4602:
SELECT imageID FROM images ORDER BY imageID LIMIT 1;
Can I just say thank you for this.
Hi
So I have been having issues with the Acers, various 10th Gen or higher models. They all state they have NVME drives with Intel Optane without RAID.
The BIOS is very basic and cannot disable the Optane feature. There is no RAID either. I downloaded the latest Fog dev branch and ensured the kernels were up to date.
When I ran the debug I saw that the NVME drives are not picking up at all.
Do you have any ideas ?
So I am having a rather strange issue that I cannot work out what could be the cause.
I have done some remodeling to the fog.man.reg file in that it selects the correct image to deploy based on various factors (Ie EFI/Legacy, 32/64bit, Previous Windows versions etc. ) of the previous installation and triggers the fog.download file to start the deployment automatically.
This seems to work fine until it comes to the deployment. Specifically, Win 11.
Now when the Windows 11 image is assigned it brings up the Failed to read back partitions. But if I assign the image directly instead of my auto-selection it works 100% . As I said Windows 10 works perfectly it just seems to be Windows 11.
Please see below :
This is my fog.man.reg file:
#!/bin/bash
. /usr/share/fog/lib/funcs.sh
clearScreen
displayBanner
disks=""
disk=""
hd=""
getHardDisk
sysman=""
sysproduct=""
sysversion=""
sysserial=""
sysuuid=""
systype=""
biosversion=""
biosvendor=""
biosdate=""
mbman=""
mbproductname=""
mbversion=""
mbserial=""
mbasset=""
cpuman=""
cpuversion=""
cpucurrent=""
cpumax=""
mem=""
hdinfo=""
caseman=""
casever=""
caseserial=""
caseasset=""
sysman64=""
sysproduct64=""
sysversion64=""
sysserial64=""
sysuuid64=""
systype64=""
biosversion64=""
biosvendor64=""
biosdate64=""
mbman64=""
mbproductname64=""
mbversion64=""
mbserial64=""
mbasset64=""
cpuman64=""
cpuversion64=""
cpucurrent64=""
cpumax64=""
mem64=""
hdinfo64=""
caseman64=""
casever64=""
caseserial64=""
caseasset64=""
dots "Using disk device"
echo $hd
echo " * Starting host registration"
echo ""
echo "********PLEASE NOTE CONNEX / PROLINE / MECER Z140C ARE NOT SUPPORTED**********"
echo ""
mac=$(getMACAddresses | base64)
sysuuid=$(dmidecode -s system-uuid)
sysuuid=${sysuuid,,}
sysuuid=$(echo $sysuuid | base64)
exists=$(curl -Lks --data "sysuuid=${sysuuid}&mac=$mac" ${web}service/man.hostexists.php 2>/dev/null)
dots "Getting previous installation details"
echo ""
# EXTRACT PREVIOUS WINDOWS VERSION
blkid_output=$(blkid)
windows_partitions=$(echo "$blkid_output" | grep -i 'TYPE="ntfs"' | cut -d':' -f1 | head -n1)
mkdir /mnt/ntfs
mount $windows_partitions /mnt/ntfs
reged -x mnt/ntfs/Windows/System32/config/SOFTWARE "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\\CurrentVersion" \\ /out.reg &> /dev/null || true
editionid=$(grep "EditionID" out.reg | tail -n 1 | awk -F= '{print $2}' | tr -d '"')
if [ -f /out.reg ]; then
currentbuild=$(grep CurrentBuild out.reg | head -n 1 | sed 's/[^0-9]//g')
# Function to determine the Windows version based on the build number
getWindowsVersion() {
build=$1
if ((build >= 7000 && build <= 8000)); then
echo "Windows 7"
elif ((build >= 9000 && build <= 9999)); then
echo "Windows 8"
elif ((build >= 10000 && build <= 20000)); then
echo "Windows 10"
elif ((build >= 22000 && build <= 23000)); then
echo "Windows 11"
else
echo "Unknown Windows Version"
fi
}
# Determine the Windows version based on the build number
version=$(getWindowsVersion $currentbuild)
echo ""
echo "Your previous Build was $currentbuild"
echo "Your current Windows version is $version"
echo "Your current Edition is $editionid"
echo "Your Windows Partition is $windows_partitions"
fi
bootmode=$(dmesg | grep "EFI v")
if [[ -z "$bootmode" ]]
then
bootmode="Legacy"
echo ""
echo "YOUR BOOT MODE IS LEGACY"
else
bootmode="EFI"
echo ""
echo "YOUR BOOT MODE IS UEFI"
fi
chiptype=$(arch)
if [[ $chiptype = "x86_64" ]]
then
chiptype="64"
else
chiptype="32"
fi
licensekey=$(tail -c+57 /sys/firmware/acpi/tables/MSDM)
deployimage=""
if [[ "$version" = *"Windows 7"* ]] && [[ "$bootmode" = *"Legacy"* ]]; then
#WIN10_LEG_32BIT_HOME
deployimage="5"
elif [[ "$version" = *"Windows 8"* ]] && [[ "$bootmode" = *"Legacy"* ]]; then
#WIN10_LEG_32BIT_HOME
deployimage="5"
elif [[ "$version" = *"Windows 10"* ]] && [[ "$chiptype" = *"64"* ]] && [[ "$bootmode" = *"Legacy"* ]] && [[ "$editionid" = *"Home"* ]]; then
#WIN10_LEG_64_HOME
deployimage="6"
elif [[ "$version" = *"Windows 10"* ]] && [[ "$chiptype" = *"64"* ]] && [[ "$bootmode" = *"EFI"* ]] && [[ "$editionid" = *"Home"* ]]; then
#WIN10_EFI_64_HOME
deployimage="1"
elif [[ "$version" = *"Windows 10"* ]] && [[ "$chiptype" = *"64"* ]] && [[ "$bootmode" = *"EFI"* ]] && [[ "$editionid" = *"Professional"* ]]; then
#WIN10_EFI_64_PRO
deployimage="2"
elif [[ "$version" = *"Windows 11"* ]] && [[ "$chiptype" = *"64"* ]] && [[ "$bootmode" = *"EFI"* ]] && [[ "$editionid" = *"Home"* ]]; then
#WIN11_EFI_64_HOME
deployimage="4"
elif [[ "$version" = *"Windows 11"* ]] && [[ "$chiptype" = *"64"* ]] && [[ "$bootmode" = *"EFI"* ]] && [[ "$editionid" = *"Professional"* ]]; then
#WIN11_EFI_64_PRO
deployimage="3"
else
#WIN10_EFI_64_HOME
deployimage="1"
fi
echo ""
echo "Your pre-selected image number is $deployimage"
echo ""
checkAndSet() {
local testvar="$1"
local onlynum="$2"
[[ -z $testvar ]] && return
if [[ $onlynum =~ [Tt][Rr][Uu][Ee] && $testvar =~ ^[0-9]+$ ]]; then
echo $testvar | base64
elif [[ $testvar =~ ^[0-9,]+$ ]]; then
echo $testvar | base64
else
return
fi
}
setIDs() {
local varVar="$1"
local str="$2"
local csvstyle="$3"
local dummy="$4"
local max="$5"
local res=""
local url=""
local oIFS=$IFS
local line=""
while [[ -z ${!varVar} ]]; do
# [[ $csvstyle =~ [Tt][Rr][Uu][Ee] ]] && echo -n " Enter the $str IDs separated with , to associate with computer (? for listing): " || echo -n " Enter the $str ID to associate with computer (? for listing): "
dummy=$deployimage
#read dummy
dummy=$(echo $dummy | sed -e 's/^,//' -e 's/,$//')
case $dummy in
[?])
url="${web}service/${str}listing.php"
clearScreen
res=$(echo -e $(curl -ks $url 2>/dev/null))
i=0
IFS=$'\n'
for line in $res; do
let i+=1
echo $line
if [[ $i -eq $max ]]; then
[[ $csvstyle =~ [Tt][Rr][Uu][Ee] ]] && echo -n " Press [Enter] to proceed or enter the $str IDs separated with , to associate with computer: " || echo -n " Press [Enter] to proceed or enter the $str ID to associate with computer: "
dummy=$deployimage
#read dummy
case $dummy in
[?]|"")
i=0
clearScreen
continue
;;
esac
case $csvstyle in
[Tt][Rr][Uu][Ee])
[[ $dummy =~ ^[0-9,]+$ ]] && printf -v "$varVar" $(checkAndSet $dummy) || setIDs "$varVar" "$str" "$csvstyle" "$dummy" "$max"
break
;;
*)
[[ $dummy =~ ^[0-9]+$ ]] && printf -v "$varVar" $(checkAndSet $dummy "true") || setIDs "$varVar" "$str" "$csvstyle" "$dummy" "$max"
break
;;
esac
i=0
dummy=$(echo $dummy | sed -e 's/^,//' -e 's/,$//')
clearScreen
fi
done
;;
""|0)
printf -v "$varVar" 0
;;
*)
dummy=$(echo $dummy | sed -e 's/^,//' -e 's/,$//')
[[ -z $dummy ]] && setIDs "$varVar" "$str" "$csvstyle" "$dummy" "$max"
case $csvstyle in
[Tt][Rr][Uu][Ee])
[[ $dummy =~ ^[0-9,]+$ ]] && printf -v "$varVar" $(checkAndSet $dummy) || setIDs "$varVar" "$str" "$csvstyle" "$dummy" "$max"
;;
*)
[[ $dummy =~ ^[0-9]+$ ]] && printf -v "$varVar" $(checkAndSet $dummy "true") || setIDs "$varVar" "$str" "$csvstyle" "$dummy" "$max"
;;
esac
;;
esac
done
IFS=$oIFS
}
[[ $exists != "#!ok" ]] && handleError "Unable to register host: $exists ($0)\n Args Passed: $* ****PLEASE CLEAR HOSTS****"
host=""
ip=""
productKey=""
imageid=""
primaryuser=""
other1=""
other2=""
blImage=""
blDoAddGroup=""
blDoAddSnapin=""
keyEnter=""
blDoAD=""
res=""
while [[ $res != "#!ok" ]]; do
echo -n " * Enter the Stockcode for this computer: "
read host
if [[ ${#host} -gt 15 ]]; then
host=${host:0:15}
echo " | Truncated to 15 characters: $host"
usleep 2000000
fi
host=$(echo $host | base64)
res=$(curl -Lks --data "host=$host" ${web}service/hostnameloop.php 2>/dev/null)
[[ $res != "#!ok" ]] && echo "$res"
done
imageid=""
setIDs "imageid" "image" "" "" 20
if [[ $(curl -Lks ${web}service/locationcheck.php 2>/dev/null) == "##" ]]; then
while [[ -z $askme ]]; do
#echo -n " Would you like to assign a location for this host? (y/N) "
askme="n"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
setIDs "locationid" "location" "" "" 20
location64=$locationid
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
fi
askme=""
if [[ $(curl -Lks ${web}service/oucheck.php 2>/dev/null) == "##" ]]; then
while [[ -z $askme ]]; do
#echo -n " Would you like to assign an ou for this host? (y/N) "
askme="N"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
setIDs "ouid" "ou" "" "" 20
ou64=$ouid
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
fi
askme=""
while [[ -z $askme ]]; do
#echo -n " Would you like to associate this host with groups? (y/N) "
askme="N"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
setIDs "groupid" "group" "true" "" 20
group64=$groupid
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
askme=""
while [[ -z $askme ]]; do
#echo -n " Would you like to associate this host with snapins? (y/N) "
askme="Y"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
setIDs "snapinid" "snapin" "true" "" 20
snapin64=$snapinid
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
askme=""
while [[ -z $askme ]]; do
#echo -n " Would you like to associate a product key to this host? (y/N) "
askme="N"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
echo -n " * Enter the product key for this computer: "
read productKey
productKey=$(echo $productKey | base64)
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
askme=""
while [[ -z $askme ]]; do
#echo -n " Would you like this host to join a domain, (using default settings)? (y/N) "
askme="N"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
blDoAD=$(echo -n 1 | base64)
askme="Y"
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
#echo -n " * Enter the primary user for this computer: "
#read primaryuser
#primaryuser=$(echo $primaryuser | base64)
#echo -n " * Enter the other tag #1 for this computer: "
#read other1
#other1=$(echo $other1 | base64)
#echo -n " * Enter the other tag #2 for this computer: "
#read other2
#other2=$(echo $other2 | base64)
#echo " * You entered all required information, "
askme=""
while [[ -z $askme ]]; do
#echo -n " Would you like to deploy image to this computer now? (y/N) "
askme="y"
case $askme in
[Nn]|[Nn][Oo]|"")
askme="N"
;;
[Yy]|[Yy][Ee][Ss])
tmp=""
ret=""
retry=3
while [[ $ret != "#!ok" && ! $retry -eq 0 ]]; do
echo " * Enter Username and Password"
echo -n " Username: "
read username
echo -n " Password: "
read -s password
user64=$(echo $username | tr -d '\012' | base64)
pass64=$(echo $password | tr -d '\012' | base64)
ret=$(curl -Lks --data "sysuuid=${sysuuid}&mac=$mac&username=$user64&password=$pass64" ${web}service/checkcredentials.php 2>/dev/null)
case $ret in
'#!ok')
echo
echo " * This host will reboot and deployment will start!"
ret=$tmp
realdoimage=$(echo -n 1 | base64)
break
;;
'#!il')
echo
echo " * Error: Invalid Login! ($retry remaining)"
let retry-=1
;;
esac
done
askme="Y"
;;
*)
askme=""
echo " * Invalid input, please try again"
;;
esac
done
dots "Attempting to register host"
res=""
while [[ -z $res ]]; do
res=$(curl -Lks --data "sysuuid=${sysuuid}&mac=$mac&advanced=$(echo -n 1 | base64)&host=$host&imageid=$imageid&primaryuser=$primaryuser&other1=$other1&other2=$other2&doimage=$realdoimage&doad=$blDoAD&location=$location64&username=$user64&groupid=$group64&snapinid=$snapin64&productKey=$productKey" ${web}service/auto.register.php 2>/dev/null)
echo "$res"
usleep 2000000
done
. /bin/fog.inventory
curl -X POST --data "host= $host" --data "stockcode= $host" --data "sysman= $sysman" --data "sysproduct= $sysproduct" --data "sysver= $sysversion" --data "sysserial= $sysserial" --data "sysuuid= $sysuuid" --data "systype= $systype" --data "cpuman= $cpuman" --data "cpuversion= $cpuversion" --data "cpumax= $cpumax" --data "mem= $mem" --data "harddisk= $hdinfo" --data "caseserial= $caseserial" --data "mac= $mac" --data "productkey= $productkey" --data "licensekey= $licensekey" --data "ip= $ip" --data "repaircode= $other2" --data "bootmode= $bootmode" --data "chiptype= $chiptype" ${web}service/fogmailer.php
echo -n ""
echo -n "**********THE INSTALLATION WILL START AUTOMATICALLY NO USER INPUT IS NEEDED*************"
echo -n ""
sysuuid=$(dmidecode -s system-uuid)
sysuuid=${sysuuid,,}switch
mac=$(getMACAddresses)
curl -Lks -o /tmp/hinfo.txt --data "sysuuid=${sysuuid}&mac=$mac" "${web}service/hostinfo.php" -A ''
[[ -f /tmp/hinfo.txt ]] && . /tmp/hinfo.txt
. /bin/fog.download
usleep 2000000
So what I am trying to do is when the computer is registered and is put through the fog.inventory file, I am trying to get what current Windows version is installed on the current drive and assign that to a certain image. IE. if it picks up that Windows 10 Home is installed, it then deploys the Windows 10 home image.
So I can see that we can use chntpw to run the command to determine the OS version.
chntpw -e /path/to/windisk/Windows/System32/config/SOFTWARE
cat \Microsoft\Windows NT\CurrentVersion\ProductName
The question is how would I go about doing this if at all possible?
Where would the best place be to run it from? FOG.MAN.REG ???
Is the Windows mounted at all during registration?
@UserBxl May I suggest looking at the BIOS . I see you captured an EFI image. Just check the boot settings on the Lenovo make sure it is booting to EFI and not the Auto setting . Also check if secure boot has been disabled.
Hi guys
So I have been trying to capture this very specific image from a Lenovo (since it cannot take a generic image deployment ).
The drives are eMMC and the capture goes perfectly but looking at the image size it says that is 2.5gb where the space used on the disk is 51gbs.
When capturing I selected Single disk resizeable as I normally select. I uninstalled fog and installed the latest dev version.
It’s not like I am getting an error it just seems to be missing a partition.
Oh and I am not Sysprepping the image.
Any ideas ?
Kind regards
@Tom-Elliott Thank you , i will have a look
So I have a problem where we are deploying the machines but there is data still on a second HDD.
Is there a way in the deployment process to erase any other HDD in the computer at the same time ?
I know this would be a unique case example.
Hi Guys
I am trying to find the imaging logs of what hosts have been imaged but I noticed that when I ran the report it only shows the history of hosts still registered and displaying.
Ie. If I delete a host and then run an image report the host does not show up in the imaging log.
Is there a way to see all hosts registered/imaged even after they have been deleted and removed?
@george1421 said in Certificate of Data Destruction:
e also trivial: https://www.geeksforgeeks.org/php-send-atta
Thank you so much . Makes perfect sense. Let me try that way .
Hi Guys
I am trying to create a certificate of data destruction to prove that the PC has been cleaned when put through FOG. I wanted to know if this has been done by anyone before.
So to explain what I have tried I must first explain that I only use Fog through a bootable USB and not PXE boot.
So what I tried to do is create a template HTML file called cert.html in the service directory. I then modified the fog.man.reg file to run an AWK command (see below) to insert the variables into the HTML file and create a new HTML file. This so far has been unsuccessful. I will need to email the report which I will be able to trigger once I create the file.
Every time I run the command I get a FILE or Directory cannot be found.
Any ideas ?
Here is my code :
awk -v host=$host -v stockcode=$other1 '{sub(/DIGICODE/,host);sub(/SYSMAN/,stockcode); print }' ${web}service/cert.html >> ${web}service/cert_new.html