@george1421 I have answered you in chat. I have tried one of the options, but it did not worked. I just don’t know what to do.

@george1421

Link of pcap file: https://drive.google.com/open?id=1kOuDBFS33VqER4g65-7mvPjeY5Tmae72

About NAT configuration, I have to say that i’ve tried set BRIDGE config (but I kept automatic (DHCP) IPs), in both VMS, but when I do it, I get “No DHCP or proxyDHCP offers were received” error.

“Can you tell me what device is 192.168.244.254?”

• I don’t know. I gave it to you all the info that appeared in FOG terminal.

Thanks.

@george1421 said in Chainloading failed. DHCP is OK.:

Can you give us a better design layout of your network and confirm the IP addresses of your fog server, dhcp, server?

Yes, i have dnsmasq in the config.

Briefly, i have 2 Virtual Machines (Vmware):

1. Ubuntu 16.04 LTS (Fog Server)
2. Windows 10 (Client)

The two virtual machines are configured as NAT.

Ubuntu’s Ethernet network configuration it’s automatic (DHCP), as well the Windows Ethernet network configuration (DHCP).

Server’s configs:

Server IP: 192.168.244.131
Broadcast: 192.168.244.255
Mask: 255.255.255.0
Installation Type: Normal Server
Using FOG DHCP: No

Client’s configs:

IP: 192.168.244.130
Mask: 255.255.255.0
DNS: 192.168.244.2
DHCP active: Yes

I had followed this tutorial to config the fog.

Before this tutorial I was trying to configure DHCP (I was getting “No DHCP or proxyDHCP offers were received” error), and only after several hours I was able to find this tutorial, and although I am no longer with this error, I have this error of " chainloading ".

I am getting this “Chainloading” error. DHCP is OK. I am trying to capture a image to FOG Server.

Can anyone help me?