[https://pastebin.com/rAhGAr4L](link url)
Posts made by Jay Bosworth
-
RE: Windows 10 EDU 1709 Domain Join Doesn't Work
I just re-imaged it at 11:15 EST. The contents of the fog.log file is too large to post here so I am going to upload the file.[0_1510676495784_fog.log](Uploading 100%)
-
RE: Windows 10 EDU 1709 Domain Join Doesn't Work
I can’t say for sure, but it looks like it might be adding my domain name to the Workgroup field? I checked all of my settings in FOG and I absolutely have my domain in the domain name field. I double checked this on my group, host, and server settings.
-
Windows 10 EDU 1709 Domain Join Doesn't Work
I just created a fresh image with Windows 10 EDU 1709 and I can’t get domain join to work. I removed the host from AD because I used different credentials to add it with the old image. After a successful image task the computer just sits at the login screen. The FOG client is installed and running. I logged in expecting it to restart a couple times and join the domain, but it didn’t. Just looking for some help to troubleshoot this issue.
Running Version 1.3.0-RC-8
SVN Revision: 5949Thanks,
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Thanks to all who participated in this thread. I killed the switch port that someone had a Netgear router hooked up to and everything is working fine now. FOG menu is showing up. I haven’t tried pulling down an image yet, but I have a good feeling. I will do my best to up-vote the proper answers even the earlier posts questioning the possibility of multiple DHCP servers. I had a feeling one was out there, but I didn’t think it would have a such a huge impact on FOG. Again thanks everyone for all the help!
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Yes, I am pretty sure it belonged to the county health dept who has a satellite office in our district.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Also unrecognized, I am close to shutting down the port that the rogue DHCP server is on. I will update once that is done and I test some more.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
I ran service --status-all and DHCP doesn’t even show up in the list so I don’t think it is the FOG server. It is somewhere else, still trying to figure out how I can track it down.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
unrecognized service.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Ubuntu 14.04.5 LTS
I have only ever setup one DHCP server. As I stated it is a new build so the settings are exactly what is called for in the FOG setup.
Option 66 pointing to my FOG Server Option 67 pointing to undionly.kpxe
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
I know this doesn’t technically go in here, but it is part of the process I am following to help resolve this… since I haven’t found what was causing the issues yet, I decided to take the plunge and upgrade to 1.3.0. So I am now running 1.3.0-RC-8 and when my computers boot they are stopping at a screen where it is asking for the address of the tftp server. When I type in the IP address of the FOG server it tries to connect to x.x.x.x/default.ipxe, but the connection is timing out. TFTP was working before the upgrade, is it possible the upgrade changed permissions? Any help is appreciated.
Thanks!
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
No, the target system I am testing with right now is an HP DC7800 Microtower. Mac address ends in AB:02
Yes 10.60.82.15 is my FOG server. Not sure what 192.168.101.2 is, but the Health Department rents a room in our district and they have a VPN setup with a DHCP server for their machines. We also have a sonic wall in place for our phones that are on a separate vLan to give them addresses. Target right now is 16.155 but that Wireshark is from a day ago so it may not be the same address now as it was then.
.170 is my main DHCP server.
the .20 addresses belong to my ISD which is our ISP so I will check with them…
I am happy to pull another Wireshark if necessary just let me know the steps I should take.
Thanks,
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Okay, thanks, I was afraid of that. I tried to filter it just to the MAC address of the client. I had a feeling it wasn’t enough though.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
[0_1472034851705_wireshark.pcap](Uploading 100%) [0_1472034862838_wireshark.pcap](Uploading 100%) [0_1472034869176_wireshark.pcap](Uploading 100%) [0_1472034874663_wireshark.pcap](Uploading 100%) [0_1472034883351_wireshark.pcap](Uploading 100%) [0_1472034888967_wireshark.pcap](Uploading 100%)
Nope, just tried six more times there…
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
I think it might be because my reputation is only 1. I could be wrong though.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Yeah let me try again, I think it said something about me not having privileges, but here goes…[0_1471963844264_wireshark.pcap](Uploading 100%)
Yeah, “You do not have enough privileges for this action”
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
This is my first time using Wireshark so I am not really sure what I should be looking for. I apologize for being totally lost at this point.
I filtered on the MAC address of the client that I am having issues with.[0_1471959801565_wireshark.pcap](Uploading 100%)
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Rebooted as requested, still exhibiting the same undesired behavior. Working on the Wireshark capture right now.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Okay thanks, I will work on installing Wireshark on a laptop here. I freed up some pace on my boot partition, it didn’t make a difference.
-
RE: FOG menu not showing up on some machines after DHCP server rebuild
Web interface for FOG Is fully functional, so I was guessing that it wasn’t impacting things. I can dig into that more and see what files I can delete to clear up space though. Like I said, I am at the point where I just need it to work so I am willing to try anything.