@george1421 thank you! I was able to manually update the kernel and resolved my issue.

@george1421
I resolved the issue by testing 1.5.10 on a laptop after trial and error I am able to have the same setup as our desktop environment. I will most likely upgrade our desktop server to 1.5.10 and recapture a new golden image.

@george1421
I resolved the issue by testing 1.5.10 on a laptop after trial and error I am able to have the same setup as our desktop environment. I will most likely upgrade our desktop server to 1.5.10 and recapture a new golden image.

Hi,
I have a fog server that is version 1.5.9 and it’s been great thus far for deploying images in our environment. I’m using a desktop as an Ubuntu server where I have configured the fog server statically. My ip address that I have assigned is 19.168.1.1 subnet 255.255.255.0 and gateway 19.68.1.1. Our fog server is not on our network. A little about my environment, I have a 8 port switch one network cable from the pc to the switch as the uplink and the rest is for pc to be image.

Lately, we purchase dell latitude 3550, and when trying to boot to PXE, we are receiving an error. We get the following ip address, and NBP File downloaded successfully but there’s an error message

“No connection method succeeded.(http://ipxe.org/040ee186”. DHCP Failed hit “s” for ipxe shell: reboot in 10 seconds

Can someone explain what is causing this error and how to potentially resolve.

@george1421 thank you! I was able to manually update the kernel and resolved my issue.

Hi I am unable to preform full host registration & inventory in a new Lenovo ThinkCentre. I am getting the following error. Unable to locate IOAPIC for GSI -1… no network interface found, your kernel is most probably missing the correct driver!

When I am working on a dell desktop or laptop, it’s working correctly where I’m able to capture and deploy images. However for Lenovo ThinkCentre I’m getting this error.

Any suggestions on why I am getting this?