@george1421
Yeah, I used the FOG scripts to do the rebuild per the guide. The lockup was occuring prior to the iPXE update as well, so doing due diligence I made sure to properly update and rebuild the iPXE to 1.21 through FOG.

@george1421
Yeah, once the iPXE was downloaded, I recompilied it and rebooted the server. I tested the system on a Dell Optiplex 990 with UEFI and it gets to the input information screen post BZImage host registration.

My FOG server is running on Centos 7 fully updated, and I am working on getting a FOG image deployed to several Lenovo Thinkbook G2 ITL Laptops. I have verified FOG is running 1.5.9, BZImage is 5.15.19, and updated iPXE to newest version. I have turned off secure boot, changed DHCPD to try snp.efi, ipxe.efi, realtek.efi (Lenovo’s use realtek cards) and when I use any of those it fails to configure the network card.

I manually added the host and mac address to test running it as well. When I run DHCPD as snponly.efi is that is where the BZImage gets to either 0, 18, 27, 30, or 40% and stops. I have enclosed a picture of the screen.