I would like to update this thread, we found that the problem was with the DHCP Lease for some reason. We cleared the lease and now it is booting normally. It was very odd that this was an issue because we pulled another of the same machine from the box and it worked without any problems.

Hi all,

I just ppgraded from 1.5.9 to 1.5.10.1622 and now i cant multicast I get invalid login after i enter the session name, it never even asks for a login. Thoughts?

@george1421 Ok so next question, is there any place in the config to auto join a session i can add and change for larger deployments so i dont need to type the session name, I already eliminated the password prompt for now through the gui.

@george1421 ok so i took that rendezvous address back out and then ran it and now it works! I also updated the kernel on the server to the newest one so not sure if that had anything to do with it. Thanks!

@george1421 what i have in the rendezvous address is the server ip address which in this case is 10.200.100.185. Now if i specify 1 computer in the task setup to run as a test it should go correct? Also its not even registering my client if i view the task, even though the client is connected and at the blue partclone screen waiting for the image to be served. I cant figure out what is wrong here.

@george1421 So i have a /20 network, server is 100.185 computer was 104.xx because my subnet runs from 96.xx.xx to 111.xx.xx. Are you saying that the computer and server need to be in the same block of 255 ips?

@george1421 Ok so everything is on the local network now and im still getting the hangup on the partclone screen once its booted in. Thoughts?

@george1421 Ok I will install a local copy of fog on my current subnet, but like i said before, i had it configured that way originally and it still did the same thing. I will report back once i have it completed and try it out.

@george1421 The server resides over a vpn but the storage node is on the same network and subnet. Ive had it thought where the server was on the same subnet with the same results.

Hi all,

I am having trouble multicasting an image, I have looked through the forums and tried some previous advice like setting the rendezvous address and turning off IGMP snooping on my network, neither have worked. I can boot into the multicast, but it gets stop on the blue partclone screen and never serves the image. Thoughts?

Ok so as I posted there is a work around and I suspected something in iPXE but I wanted to be sure I wasn’t being a bonehead here. Thanks!