Recently replaced old 2008R2 DCs with 2012R2. Recreated DHCP scope options. Booting to iPXE now displays a chainloading failed error. The error is reproduced when the DHCP scope options are completely removed and using a iPXE USB boot. The iPXE USB boot has worked for months prior to the DHCP change. Can anyone point me in the right direction?

The device to be cloned is a E15 Lenovo laptop. The image to be deployed is a UEFI built/captured image that has been deployed a dozen times prior to the DHCP change.

Thanks,
Kevin


@george1421 You were correct. Was able to locate the password for the fogproject account and that account was able to upload the file to the tftp directory. Thank you for your guidance.

@george1421 taken over the server, not sure what the root password could be. Any way to reset or recover? Thanks!

@wayne-workman said in File Copy:

rsync

Thank you for replying. Will try the other utilities

Trying to update the ipxe.efi on my server. Unable to copy to the fog server, receive access denied error using pscp c:\temp\ipxe.efi tech@10.0.0.61:/tftpboot/ipxe.efi

any ideas?

Thanks,
Kevin