@george1421 There is indeed a file named refind.efi in /var/www/html/fog/service/ipxe. I renamed the refind_x64.efi file previously downloaded and tested it. It is the same. I posted the compatibility issue in the refind forum.

@florent 0.13.3.1 is the version I already tested previously.

@george1421 exit 1 and exit 2 just restart the system.

@george1421 Like I said in the original post, I tested every options from the Host EFI Exit Type including EXIT, it doesn’t work. It says “chainloading failed, hit ‘s’ for the ipxe shell”. Yes, what is it about setting the error level ?

@george1421 I booted the refind_x64.efi file renamed bootx64.efi from the usb stick. It’s the same error, “rEFIND - Initializing” in a blue banner with a black background. It seems to be indeed a compatibility issue with this model.

@george1421 There is indeed a file named refind.efi in /var/www/html/fog/service/ipxe. I renamed the refind_x64.efi file previously downloaded and tested it. It is the same. I posted the compatibility issue in the refind forum.

@george1421 Hi, I installed the latest bios firmware and it’s still the same. The model is quite recent, juste received it. It loads the fog boot menu fine so ipxe works but gets this error for chainloading. Any other file to update ?

@george1421 Hi
I downloaded the latest refind_x64.efi and refind_ia32.efi then moved them and it still doesn’t work, with the same message. Are there other files to update as well ?

Hi,

There is an issue with chainloading to boot from fog menu on HP Eliteone 800 G6. Pxe boot works for deploying. But then, when booting in pxe when there is not task, it displays the fog menu but doesn’t start from HD. There is this screen.

Host Exit EFI Type is configured on REFIND EFI on fog web interface. The other options don’t work. There is no issue with other model such as DELL.

Fog version is 1.5.8

What setting should be set ?

Thanks

@george1421 Well the image does deploy by updating the kernel but then there is this :

There’s an issue with setting the disk guid. Is it about the image format ? It’s set on Single Disk - Resizable ; Partition - Everything, Compression is set to 6.

@george1421 It works. Thank you.

So then the bzImage downloaded from the fog configuration menu are corrupted ?

I download them from https://fogproject.org/kernels/ as of now.