@sebastian-roth I had a similar issue with Fujitsu Q7010, your advice about building latest iPXE binaries fixed mine. Now it boots just fine, thank you !

@george1421 I isolated my production network from my Deployment network.
If you’re interested, here is a logical network plan of my FOG Network

• “Switch FOG” is an old D-Link DGS-1016D
• I also used D-Link DGS-1024D [with “Port isolation & Storm control switch” turned ON that comute only the 24th port with the others] when i mass deployed using multicast 24 laptops per deployment (last picture is 100% show off)
  

@sebastian-roth I had to hand over the U7511 and i did test on another laptop [E5511] ; i’m going to test on another U7511 when i’ll receive a new one next week. I’ll get you in touch.

Thank you again for the good work you do !

@george1421 I isolated my production network from my Deployment network.
If you’re interested, here is a logical network plan of my FOG Network

• “Switch FOG” is an old D-Link DGS-1016D
• I also used D-Link DGS-1024D [with “Port isolation & Storm control switch” turned ON that comute only the 24th port with the others] when i mass deployed using multicast 24 laptops per deployment (last picture is 100% show off)
  

@sebastian-roth It worked, Thank you very much !
@george1421 It’s way better now, anything GB/min is far more desirable !

Thank you both of you, it’s solved.
If anyone ever has the same issue [FUJITSU E5511 U7511 deploy image is super slow], here is what i did :

• Download bzImage-5.15.19
• Move it to /var/www/html/fog/service/ipxe/
• On your FOG server web page go to [FOG Configuration] top menu > [FOG Settings] on the left pane > expand [TFTP Server] > replace [TFTP PXE KERNEL] item by bzImage-5.15.19
• It should work now
  When the [Kernel Update] item on the left pane will be updated with new version you will have to change back [TFTP PXE KERNEL] item to bzImage

@sebastian-roth i’m going to start with this, thank you.

@george1421 If the kernel update doesn’t work i’ll give it a try, thank you too.

Hello, I’m a long time FOG server user, and first of all you do an amazing job !

I’m imaging on Fujitsu computers (esprimo P558/P5010 Q558/Q7010) and laptops (lifebook A359/A3510 E559/E5510 U759/U7510) for around 3 years now.
When I had difficulties with new generation (last 1/2 digits on product number 9/10 eq. 9/10th gen intel core proc) I used to update Kernels and iPxE and it just works.

However I have an issue deploying image on last generation Fujitsu laptops (E5511 and U7511).
FOG v1.5.9
Kernels v5.10.71
iPxE v1.21.1 [g1192e]
I have a workaround, using a USB-network adapter and it works just fine booing and imathing through this ethernet interface ipv4. Atolla adapter on Amazon.fr
When I try booting my laptop on the native ethernet interface ipv4, it successfuly loads up to FOG main menu then [deploy image] then it take ages to restore image [here is a picture i took during the process]

@sebastian-roth I had a similar issue with Fujitsu Q7010, your advice about building latest iPXE binaries fixed mine. Now it boots just fine, thank you !