Thanks for all your help guys. Finally got it working. It was the draytek in the end. They seem to be a bit odd with DHCP option 66. Setting the option from the web interface wasn’t working so in the end had to do the following from telnet:
srv dhcp option -e 1 -1 [lan number] -s [Fog Server IP]
not sure what the -s flag is but it worked after that.
Couldn’t find anything about this on the net so hopefully this will help someone else in the future!
Thanks again!
Thanks for all your help guys. Finally got it working. It was the draytek in the end. They seem to be a bit odd with DHCP option 66. Setting the option from the web interface wasn’t working so in the end had to do the following from telnet:
srv dhcp option -e 1 -1 [lan number] -s [Fog Server IP]
not sure what the -s flag is but it worked after that.
Couldn’t find anything about this on the net so hopefully this will help someone else in the future!
Thanks again!
Thanks for the response. Good to know i’m not flogging a dead horse.
Maybe I should just try ubuntu?
Did you have to do anything special to your vSphere setup? Firewall etc?
Dear all,
I’ve installed fedora server 22 on a VM on vSphere 5.5 followed the instructions at https://wiki.fogproject.org/wiki/index.php/Fedora_21_Server to install fog server but I can’t get it to work.
Everything installed fine and fog server seems to be running fine but I can’t get a machine on the network to boot.
I have a draytek router handing out the fog server ip on 66 and undionly.kpxe on 67.
The machines seem to be getting the options but then just say:
PXE-E32: TFTP open timeout
I’ve been through all the steps at https://wiki.fogproject.org/wiki/index.php/Tftp_timeout… and still can’t get it working.
I can manually get a file, settings look fine, I’ve disabled firewalls (on fedora and vsphere).
I’ve tried capturing packets and looked at them with wireshark but don’t seem to be able to see anything coming from the ip of the computer attempting the network boot.
Does anyone have any ideas?
Is it best not to use vSphere at all? Is there a better version of Linux to use than fedora server 22?
Totally stuck so any help would be greatly appreciated.
Thanks in advance!