@george1421 Oke! Say it when you found something.

@tom-elliott
When will 1.5.1 be released because i have 2 weeks to roll it out.

@george1421 I found this https://tinkerboarding.co.uk/wiki/index.php?title=PXE-boot

I will test it tomorrow.

@george1421
Using the default one. Is there a way to install an older version, i dont care if the webinterface look nicer, its only for installing Windows.

@george1421
Could be, i never had any isues with fog 1.4.4 which i used in a school project. But with 1.5.0 it doesnt seem to work anymore.

@george1421
http://prntscr.com/iwj3ip
#!ipxe
set fog-ip 10.0.2.15
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://10.0.2.15/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap – -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item os.windows10 test
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=http://10.0.2.15/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.2.15:/images/ storageip=10.0.2.15 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=http://10.0.2.15/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.2.15:/images/ storageip=10.0.2.15 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=http://10.0.2.15/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.2.15:/images/ storageip=10.0.2.15 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:os.windows10
initrd nfs://10.0.2.15/images/os/windows/WinPE_amd64.iso
chain memdisk iso raw
boot || goto MENU
param sysuuid ${uuid}
:bootme
chain -ar http://10.0.2.15/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

Yeah
http://prntscr.com/iwiexm

http://prntscr.com/iwhr96

Hello

I followed george1421 tutorial of booting an iso of windows 10
https://forums.fogproject.org/topic/10944/using-fog-to-pxe-boot-into-your-favorite-installer-images

I can get in the FOG menu but when i select windows 10 it says

could not start download operation not suported

The version of fog i use is 1.5.0