@sebastian-roth Okay so I work for a small mobility firm. I came in and they were using Fog to image their machines. I have no experience with this client at all. So when I came in it was not working. So I am not 100% on why things are the way they are I am just trying to figure it out and get it up and running so I can make new images and start from scratch. If I put the fog server on the main network it will cause our techs to not boot properly.

@sebastian-roth My fog server is 192.168.1.1

status

● isc-dhcp-server.service - ISC DHCP IPv4 server
   Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor
   Active: active (running) since Thu 2017-08-31 16:42:07 EDT; 16h ago
     Docs: man:dhcpd(8)
 Main PID: 6908 (dhcpd)
   CGroup: /system.slice/isc-dhcp-server.service
           └─6908 dhcpd -user dhcpd -group dhcpd -f -4 -pf /run/dhcp-server/dhcp

Sep 01 09:06:45 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:08:19 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:10:39 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:15:01 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:16:09 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:25:01 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:26:50 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:32:18 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:33:34 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
Sep 01 09:35:01 Fogserver dhcpd[6908]: DHCPINFORM from 10.150.18.89 via ens32: n
lines 1-18/18 (END)

dhcps.conf

# DHCP Server Configuration file\n#see /usr/share/doc/dhcp*/dhcpd.conf.sample
# This file was created by FOG
#Definition of PXE-specific options
# Code 1: Multicast IP Address of bootfile
# Code 2: UDP Port that client should monitor for MTFTP Responses
# Code 3: UDP Port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of seconds a client must listen for activity before trying
#         to start a new MTFTP transfer
# Code 5: Number of seconds a client must listen before trying to restart
#         a MTFTP transfer
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16;
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
# Specify subnet of ether device you do NOT want service.
# For systems with two or more ethernet devices.
# subnet 136.165.0.0 netmask 255.255.0.0 {}
subnet 10.150.18.0 netmask 255.255.255.0{
    option subnet-mask 255.255.255.0;
    range dynamic-bootp 10.150.18.10 10.150.18.254;
    default-lease-time 21600;
    max-lease-time 43200;
    option routers 192.168.0.1;
    option domain-name-servers 127.0.1.1;
    next-server 192.168.1.1;
    class "Legacy" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
        filename "undionly.kkpxe";
    }
    class "UEFI-32-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-32-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-64-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
        filename "ipxe.efi";
    }
    class "UEFI-64-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
        filename "ipxe.efi";
    }
    class "UEFI-64-3" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
        filename "ipxe.efi";
    }
    class "SURFACE-PRO-4" {
        match if substring(option vendor-class-identifier, 0, 32) = "PXEClient:Arch:00007:UNDI:003016";
        filename "ipxe7156.efi";
    }
    class "Apple-Intel-Netboot" {
        match if substring(option vendor-class-identifier, 0, 14) = "AAPLBSDPC/i386";
        option dhcp-parameter-request-list 1,3,17,43,60;
        if (option dhcp-message-type = 8) {
            option vendor-class-identifier "AAPLBSDPC";
            if (substring(option vendor-encapsulated-options, 0, 3) = 01:01:01) {
                # BSDP List
                option vendor-encapsulated-options 01:01:01:04:02:80:00:07:04:81:00:05:2a:09:0D:81:00:05:2a:08:69:50:58:45:2d:46:4f:47;
                filename "ipxe.efi";
            }
        }
    }
}

Okay so I found out that dhcp was turned off. It looks like my dhcpd.conf file is maybe wrong. It looks like it isn’t assigning ip addresses. I am leaving the office for tonight. I will be back in the morning to hopefully figure this out.

It isn’t connecting to the internet though. I am setting a static IP and connecting to it that way.

When setting up the DHCP. It said no router address found. I am setting it up as a stand alone. What should I put in this case.

Okay retrying the install now. Will let you know the results. Thanks for your patience by the way. I am usually pretty good with this kind of stuff.

Even after changing the fogsettings file it skipped the dhcp setup

Okay I was able to use CHOWN to take control and edit the file. Rerunning the installer. Wish me luck.