@sebastian-roth I had some spare time this morning and decided to bypass all of my infrastructure to see if my infrastructure and/or other issues similar to spanning tree were causing the problem.

I setup an old NUC with Ubuntu 14.04 SVR and installed FOG. I took an old DD-WRT router and setup it up to work with the FOG server along with a $20 Switch.

Once everything was setup, I attempted to capture images for the three HP 4300 SFF computers along with the 2 NUC computers and I had “Zero” issues.

There aren’t any compatibility issues with the NIC’s and the FOG server. Just wanted to let you know that bringing everything down to a very simple setup eliminated all of the issues we were having setting up FOG on a VM, inside its own vlan, etc…

This setup works for us and wanted to update you as I think this is a good project and solution.

Thanks again for all of your help.

Ok - Thank you guys for your help - I don’t have a bunch of time to try to figure this out. I was using Snap Deploy but that application is no longer any good and I have to move pretty fast on a replacement solution. I was hoping FOG would help but I guess my equipment has some issues.

Thanks again for your help - I greatly appreciate your time.

Please close this case - Have a great day.

@george1421 -LMAO- I know what were trying to accomplish , I just wanted to show you the image to show you what I was doing. Saying done and showing something was actually done are two completely different things.

Reaganomics - Trust, but verify

I appreciate you help - Its a great project - If I can get this work work I will support it moving forward - Thanks again

@george1421 Same thing

@george1421

@sebastian-roth Done - Thank you again for all of your help + feedback.

@sebastian-roth

@george1421 Will do - Give me 5 mins