@george1421 I have Tried Fog servers 1.3.5-RC1, 1.3.5, 1.4.0-RC1.

Here are the two images that are for this model of computer (1 is production and 1 is for Testing- neither work) :

root@fog-server:/images/KenTestImage# ls -l /images/KenTestImage
total 11291028
-rwxrwxrwx 1 root root 1048576 Mar 29 09:42 d1.mbr
-rwxrwxrwx 1 root root 1342424 Mar 29 09:42 d1p1.img
-rwxrwxrwx 1 root root 12772323 Mar 29 09:42 d1p2.img
-rwxrwxrwx 1 root root 11454954 Mar 29 09:46 d1p3.img
-rwxrwxrwx 1 root root 11535373904 Mar 29 09:46 d1p4.img
-rwxrwxrwx 1 root root 860 Mar 29 09:42 d1.partitions
root@fog-server:/images/KenTestImage# ls -l /images/PVOptiplex990/
total 20610920
-rwxrwxrwx 1 fog root 1048576 Mar 23 16:21 d1.mbr
-rwxrwxrwx 1 fog root 1001811 Mar 23 16:21 d1p1.img
-rwxrwxrwx 1 fog root 12770930 Mar 23 16:21 d1p2.img
-rwxrwxrwx 1 fog root 4506990 Mar 23 16:26 d1p3.img
-rwxrwxrwx 1 fog root 21086238649 Mar 23 16:26 d1p4.img
-rwxrwxrwx 1 fog root 860 Mar 23 16:21 d1.partitions

Hey Guys,
Thank you for your replies. The issues I stated here was because of the UEFI being enabled. UEFI Didn’t like the fixed partition sizes. As the FOG Developers stated, changing the images to “Resize partition” fixed the issue for UEFI Machines. Using this method, I was able to make an image on a 500gb HDD and deploy it to a 256 SSD without issue.
In regards to the “not booting after successful restore from UEFI”, that issue was limited to older Dell modals that have never booted to UEFI before. Once i selected the boot device the computer booted fine every time after that. They booted even after subsequent re-images.
I am currently running version 1.5. RCx.

Thanks for all the help.

Hey Guys,
Looks like switching to Single Disk resizable fixed the Imaging issue. And updating to 1.4-RC4 seemed to fixed the UEFI Boot Issue I mentioned earlier. Thanks for the help guys.
Ken

@Tom-Elliott After more testing I believe I found the issue. The Issue seems to be with Machines that use UEFI. I get the error while trying to restore a “Not resizable Image” to a System that has UEFI.

I followed your advise and set the image to “resizable” and the deploy image does work. I was able to fix the Upload error I received earlier by running sys-prep before uploading the image.

However, I seem to have ran into 1 final issue using “Resizable” type with a UEFI computer. It appears that if I apply image made on Computer A to Computer B, the computer will not boot. I have to preform a one time boot menu, choose the UEFI option and that seems to fix the boot issue. the computer can reboot and it remembers the Boot option.

1. What is the best method of imaging when dealing with UEFI Computers?
2. Did anything change in Version 1.3.5+ that changes the way Fog handles UEFI computers?
   Thanks for all your help!

I have a correction. the Model having the imaging issue is an Optiplex 990 SFF (not 790 DFF)

@george1421 I have Tried Fog servers 1.3.5-RC1, 1.3.5, 1.4.0-RC1.

Here are the two images that are for this model of computer (1 is production and 1 is for Testing- neither work) :

root@fog-server:/images/KenTestImage# ls -l /images/KenTestImage
total 11291028
-rwxrwxrwx 1 root root 1048576 Mar 29 09:42 d1.mbr
-rwxrwxrwx 1 root root 1342424 Mar 29 09:42 d1p1.img
-rwxrwxrwx 1 root root 12772323 Mar 29 09:42 d1p2.img
-rwxrwxrwx 1 root root 11454954 Mar 29 09:46 d1p3.img
-rwxrwxrwx 1 root root 11535373904 Mar 29 09:46 d1p4.img
-rwxrwxrwx 1 root root 860 Mar 29 09:42 d1.partitions
root@fog-server:/images/KenTestImage# ls -l /images/PVOptiplex990/
total 20610920
-rwxrwxrwx 1 fog root 1048576 Mar 23 16:21 d1.mbr
-rwxrwxrwx 1 fog root 1001811 Mar 23 16:21 d1p1.img
-rwxrwxrwx 1 fog root 12770930 Mar 23 16:21 d1p2.img
-rwxrwxrwx 1 fog root 4506990 Mar 23 16:26 d1p3.img
-rwxrwxrwx 1 fog root 21086238649 Mar 23 16:26 d1p4.img
-rwxrwxrwx 1 fog root 860 Mar 23 16:21 d1.partitions

Hey Guys,
Thank you both for the information and help with this issue. Thank you also for the link.

However, if I make the changes you are asking I will have to remake all my images and I am not quite willing to do that yet.

I did find something else odd though.
I was able to find a Backup of the Fog VM from when everything still worked. I loaded that VM and tested. I have the same issue.

I replaced the Hard drive and had the same issue. I got another machine of the same model (optiplex 990 SFF) and had the same issue. I also changed the images to a production image and that image also revieved the error.

I pulled two machines (Optiplex AIO 9030 and Optiplex 790 Micro) and they both imaged correctly without issue!

Is there a reason that 1 computer model (Optiplex 790 SFF) will not image?

Making that change did fix deploying issue so it now images. However, the computer is not bootable after deploying the image.
Also, I am now unable to upload images. Below is the screen shot.

Thank you for your continued help.

The image Type is already set to “Multiple Partition Image - Single disk (Not Resizable) - 2”
Is that what you meant?

Thank you for your replay.

Here is the output:
<username>@fog-server:/images/KenTestImage$ ls -l /images/KenTestImage/
total 11291024
-rwxrwxrwx 1 root root 1048576 Mar 27 15:07 d1.mbr
-rwxrwxrwx 1 root root 1342424 Mar 27 15:07 d1p1.img
-rwxrwxrwx 1 root root 12772323 Mar 27 15:07 d1p2.img
-rwxrwxrwx 1 root root 11454954 Mar 27 15:10 d1p3.img
-rwxrwxrwx 1 root root 11535373904 Mar 27 15:10 d1p4.img
-rwxrwxrwx 1 root root 860 Mar 27 15:07 d1.partitions