@Sebastian-Roth Thank you for your advice, okay i’ll follow your setup. Thank you for your help guys !

But, i have a new problem here,
When deploy dual boot image, using Unicast no problem, everything work perfect.
And when i deploy it with Multicast, there is a problem. I think when we used multicast mode, that cannot deploy SWAP partition. Or this is only happened to me?

After this i’ll follow your setup bro @Sebastian-Roth

@Sebastian-Roth I think my previous setup wrong, so i creating from scratch my system. And i using vmware for my experiment.

When i run sudo sfdisk -d /dev/sda the output:

Here my “mbr_images.tar.gz” after follow your step -> https://drive.google.com/file/d/0B4knU-eG9r1nVjlncEo3d2ZvUGc/view?usp=sharing

And this how i setup my latest system:

1. I install opensuse 11.4. Set a half of my hdd to extended, then i add “/” partition using ext3 and add “swap” partition. Ok, opensuse work perfectly.
2. Install windows 7. Make remaining unlocated partition for my windows. I just set 1 partition “C” only. Done, windows 7 work perfectly. But Bootloader didn’t show, by default my setup boot into windows 7.
3. Because my setup need dual boot os, so i need boot loader. Then i found easiest way that using EasyBCD. After success intall easyBCD to my windows, then i add new entry, on tab Linux/BSD and choose type bootloader GRUB(Legacy), and i let “Use EasyBCD’s copy of GRUB”, then i save my config in easyBCD. Done, dual boot work nice and perfect, windows 7 and opensuse.
4. I think my setup will work, so i creating image from that. With fog 1.2.0, i create new image with settings OS “Linux(50)” and image type “Multiple partition image - single disk”, this settings based on fog wiki. Finally, my system finished creating image of dual boot os.
5. I ready for deploying my image to client, and finally the deployment finished. First i choose boot from windows 7, and system success boot and work perfectly. Second i choose boot from opensuse, OMG opensuse work perfectly too, i think my experiment success bro.

How about my setup? Is that right or no? Thanks before bro.
And @Thiago, how about my setup bro?

@Thiago partition layout my opensuse using swap and /. But i install bootloader (using easyBCD) in windows 7 partition.
My fog version is newest one 1.2.0
How about your config for dual boot bro? so i can cloning easily

@Sebastian-Roth wow maybe my system not configured well. First i creating partition for os windows 7 and linux (suse), then i installing windows first then linux. And then i installed the boot loader in partition windows. That’s my config.
How about your setup bro that would work?

I recently using fog as cloning software in my company. Everything work fine, until someday i need to clone pc with widows 7 & opensuse.
I’ve tried many ways, from tutorial from wiki that use os type linux and multpartition single disk, but that not seems work when i finished to clone, windows 7 bootloop and opensuse blackscreen with text GRUB GRUB.

Then i tried with my way, choose os type windows 7 and mltipartition single disk. Widows 7 work fine, but opensuse blackscreen with text Initramfs unpacking failed.

Anyone have tried cloning dual boot like me before, or have the solution.
Thankyou