@Junkhacker
OK everyone - it looks like you are correct. The last order he placed for 14 machines were a different model with a 500GB HDD. My guess is he made his golden from these and that’s what’s in the FOG server. The ones in the old bug-infested tech room, while he may have used them as test devices at some point, are not the ones he put the images on.

One last question: My new machines I will be getting will have 500G or larger so the image should work. What happens to the left over space? I guess I’m not sure exactly what re-sizable means and how partclone works. Any resource suggestions greatly appreciated.

ALSO - MANY MANY THANKS to Junkhacker, Wayne Workman, Sebastion Roth and all others who stayed with me to get this done. This is an awesome program and you are awesome guys! My gratitude always.

Preston

@Junkhacker Perhaps I should be installing Trunk then. I take it this is the link you gave me earlier to try? Especially if it’s easier to troubleshhoot.
This is getting difficult - the room is across campus and has actual bugs in it.

@Wayne-Workman
Awesome. I will give it a try tomorrow. I have a switch to configure…(in a bugless room).

Many thanks to all for your support.

@Junkhacker
Thanks again!

@Junkhacker
Fully deploy and then upload right away - as resizable. Multi-partition? I guess there’s the Dell part, the windows part and then the last - I’m not sure how Dell sells them.

@Junkhacker
OK everyone - it looks like you are correct. The last order he placed for 14 machines were a different model with a 500GB HDD. My guess is he made his golden from these and that’s what’s in the FOG server. The ones in the old bug-infested tech room, while he may have used them as test devices at some point, are not the ones he put the images on.

One last question: My new machines I will be getting will have 500G or larger so the image should work. What happens to the left over space? I guess I’m not sure exactly what re-sizable means and how partclone works. Any resource suggestions greatly appreciated.

ALSO - MANY MANY THANKS to Junkhacker, Wayne Workman, Sebastion Roth and all others who stayed with me to get this done. This is an awesome program and you are awesome guys! My gratitude always.

Preston

@Junkhacker does one of these files tell me how big the source drive was?

@Junkhacker
d1.mbr
d1p1.img
d1p2.img
d1p3.img

@Junkhacker
yep…says target partition is too small. I don’t understand that at all.

@Junkhacker Debug is on the /dev/sda2 now. I guess I find out at the next ENTER.

@Junkhacker Doesn’t make sense to me - he didn’t have any different computers. What is confusing is that the image on the server is alot smaller than 250G.

@Junkhacker
So, these disks have 3 parts in them and the last one is too small on the device for the image stored? Does that sound right?

@Junkhacker same ones - Dells w/250G HDD. I’m trying a deploy w/debug now