Hey @Tom-Elliott

I therefore realize a fog server with a physical machine under Ubuntu

thank you for the answer
@+

Incident résolu
Incident Resolved

Thank you for your feedback,
I do all the tests at the end of the week and I’ll give you a feedback at that time. I won’t have the equipment available until

Hello @Sebastian-Roth

I just tried it and the problem remains the same impossible to launch windows, blinking and still present.

If a person has a lead, I’m a taker. If you need more information, do not hesitate to contact me. So I put it back on sda2
We look forward to hearing from you soon.
Thank you for your help

Hello @Sebastian-Roth

The problem wouldn’t come from the choice of partition at boot time?
I ask the question so you never know

Thank you for your help

Hello @Sebastian-Roth

Here is the screenshot

Thank you for your help.

Hello @Sebastian-Roth

You will find below the requested screenshots.

Hey @Tom-Elliott, @Sebastian-Roth

This does not work despite the fact that the image is well deployed
I tried the “partclone uncompressed” function and I reach the end of the process but when I restart the Windows computer does not start I have a flashing white bar in the upper left corner of my screen despite the image being well deployed in the hard disk. As if windows doesn’t start.

In the bios we are well in AHCI and Legacy for the boot of windows. I also tried in UEFI impossible to start

All signals are on Done

Thank you for your feedback
You will have a compression mode solution to propose to me to work or do tests to continue using a raspberry or do I have to change my hardware?

Currently I am doing a test without compression. I’ll get back to you as soon as it’s over.

Hey @Sebastian-Roth
Thank you for your feedback
If I use the parameter “partclone uncompressed”, do you think it can work?

Hey @Tom-Elliott my savior
Here is the information in the graphical interface

Here is the information with the command line

I tried with the single disk - resizable option and it doesn’t work either

Hello

My fog server runs on raspberry pi (noob operating system) with a hard disk at boot time of 1TB ssd. I can correctly capture my image from my disk but I can’t deploy it. I tried all the configurations in the bios and couldn’t deploy. Boot AHCI, Start-up UEFI… I can’t find a solution.

Do you have any idea?

The image capture I’m trying to deploy was basically on a 3.5 hard disk and now I’ve put everything on SSDs.

Thank you for your help