ok I will do that and I will get back with news

Ok , Yes the DHCP is not controlled by the fog server it is the network configuration it my be a router I am not sure. I do know that the DHCP server that hey are using in as it is in the Wiki fog page as it is for the cisco setup. Know sould I tell them to change the 10.1.8.254 to 10.1.8.1 will this help??

@Sebastian-Roth he already did and it still didn’t work

@george1421 how do I try the usb flash drive

@george1421 and the thing that bugs me more is that they have this working in other schools. They say that they don’t have a firewall. And I don’t think that they will let me manege the dhcp

@Sebastian-Roth her is the ifstat foto

@Wayne-Workman yes it’s fog Trunk but what should i do know?

@Sebastian-Roth
This is the message that I get when it stops. What I do is Press “s” then I type “dhcp” it configurs the dhcp and says ok
then I type “exit” and boom the menu appears . And yes I think it has to do with the timing because it loses conection to the lan card when it runs this script.

OK thanks to Tom Elliott I got the fog server to work kind of the only thing that is missing is on booting the network card it loses the connection to the lan link card and I have to press S and type dhcp and it gets back up and then o type exit and the menu boots up. The problem is that I have to be physically at the client PC for this to work so if I were to deploy the software it won’t go because I have to press S DHCP and then exit and then it will pop up the menu

@Tom-Elliott can it be in 1 hour you would save my life

@Tom-Elliott I am willing to try anything to make this work

@Tom-Elliott So what sould I do to fix that??

@Tom-Elliott No, this appears:
iPXE initialising devices…ok
iPXE 1.0.0+ (3a02) – Open Source Network Boot Firmeware – http://ipxe.org
Features: NFS FTP HTTP HTTPS ISCSI DNS TFTP VLAN AoE bzimage ELFMBOOT PXE PXEXT
Configuring (net0 00:22:64:ba:2b:56)…
then it just restarts the pc. I am going to update the Bios to see if it could be something with the Bios. Other then that I just don’t know what to do or how to see if everything is correct with the boot file.

Ok so I got to this point and all the files are there I reinstalled linux and Fog server and it does the same when it should boot the menu the pc just restarts.

@Wayne-Workman from what I can see I am missing the last two files.