@Beber55 Looking at your screenshot and the wording, the reason for the RJ45 needing to be plugged is that you’ve got it set to DHCP instead of static IP.
For static IP, follow this guide: https://askubuntu.com/questions/766131/set-static-ip-ubuntu
The other option is, if Virtual Box supports it, set the interface as NAT’d so that you get another DHCP locally on your PC. I’ve not used Virtual Box in ages so I can’t confirm this.
@Uncle-Frank Had to disappear for a bit as I got buried for a bit but hopefully I’m not empty handed and I’ve got something.
@Tom-Elliott I took the make file from the SVN and went through a few compiles - started fat - with a lot of suspected options ticked and eventually one set worked.
A little bit of reading on eMMC interfaces and after going through a few posts in various places, I then took a different approach - add a few items and compile then recompile and retry. When I enabled a few extra options more towards the I2C and SPI interfaces, I ended up with one set that worked and my makefile is attached. There is an SPI and I2C bus involved but it took some digging to find the connection and unfortunately I didn’t bookmark the page before my browser crashed out.
I did try to pull the image and although there were a few errors (I don’t have the patch sets applied) but I also do think part of it may have been because the partitions are in fact bitlockered - still trying to figure that part out.
This post wouldn’t be complete without the pictures and a request:
I am betting if you recompile with the above make and the patches you applied, at least @d4rk3 should be up and running and myself, I am trying to figure out if I can sysprep the unit for the purpose of testing so that fog can read the partitions but I will need a little while for that.
@Uncle-Frank That was a good call on the single-disk multiple partitions.
Need a few moments to recompile the kernel will test it out as well.
By the way, my kernel is not patched - straight off the kernel site, along with Tom’s 32 bit config file, only magic was the ones you pointed out and possibly the little modification to the partition functions.
@Wayne-Workman Adapter is Level 1 USB-0301 v4 http://global.level1.com/Network-Card/USB-0301/p-3285.htm which uses a Realtek chip. The v3 used the AXIS chip which Dell puts in its docks.
I’m using the 32-bit ipxe and bzImage32 as well.
@Tom-Elliott Your kernel worked flawlessly. Downloaded and uploaded perfectly and managed to check everything just before the battery hit 0%.
@Uncle-Frank It will be a little while before I can test the changes you requested.
@reub_rester Please take a look at this thread: https://forums.fogproject.org/topic/5732/dell-venue-8-pro-imaging-emmc and give it a shot.
@Tom-Elliott I can definitely hold on for a little bit. I am not sure if a diff is sufficient to identify what changed but it has to do with SPI and I2C options mostly. Not sure if there is some sort of cheat sheet with all kernel options and path in menuconfig but if not, it will have to be side by side compare. I took the base and added only the SPI and I2C options but I will need a bit to pick the options again and document what I had to change exactly.
@Wayne-Workman Fingers crossed we can see this through to completion and put Bay Trail on FOG’s compatibility list. Poking around the forums, I did see a request from @reub_rester (https://forums.fogproject.org/topic/5238/trying-to-image-a-dell-venue-pro-11-5130-x64) and his issue was the same as mine so this should help it get further along. The only thing is that in the device basic options, he will need to put in /dev/mmcblk0 and at least inventory will work.
@Uncle-Frank If need be, I will grab the dmesg output. Just let me know.
Also it seems I misread the error message on image pull. I stripped bitlocker from one of the units only to find it would throw the same error. So I think what is happening is a mount point issue.
I am not sure where the relevant code is or how complicated it would be to modify but it looks like what is happening is that the enumeration is not expecting two character suffixes.
Typical setup is: /dev/sdXY where x is usually a and Y could be anything from 1 to 5.
MMCBLK setup is /dev/mmcblkXpY and unlike the above, X is a number and so is Y.
However it looks like partition resize input is not being fed Y although the script before it is showing the path correctly. Function input variable size too small?
I am poking around to figure where this comes out of but if anyone has any pointers, I can have a look.
@Tom-Elliott Here you go. It is 32-bit as the 64 bit kernel doesn’t seem to working with the Venue, crashes out right after iPXE gets done. 32-bit has been good to me so far.
Point taken on the cheat sheet - hopefully this does the trick.
MMCMod-TomElliotConfig.32.patch
On another note on the init_32.xz - I tried to get rpmb to stay out by using udev rules but then I noticed you have got part of the rules there. Is there any way to stop the unit from rebooting and drop to a shell to see what last happened before it failed?
@Tom-Elliott The upload and download on my compiled kernel worked - not so much as a hint of something being wrong. Everything works! Currently testing the kernel that you just uploaded and promising so far on upload. I think the unit has just enough battery to go through a download before it shuts off.
One point of note I should mention (in case someone comes across this post while looking for Venues and PXE booting) is that I am using Level One’s USB-301 Fast Ethernet adapter. I have both the AXIS (died after the first post!) and Realtek variants but all screenshots I’ve posted in this thread are using the Realtek variant.
@Tom-Elliott 64-bit didn’t work for me at all before - I will retest the latest build once more and see if there is a difference. I am currently running FOG with both the bzImage and init set to point to the 32-bit variant in FOG Configuration. I will hold back one unit from this lot for “testing” purposes so if you need me to test anything to fine tune things, I can help.
Also @d4rk3 how did you get single disk - resizable to work? I am still seeing errors. With the little patch on the ramdisk I applied, I can get further but not to the point I can image.
My init_32.xz is dated Aug 31 12:01 what is the date on yours?
@Uncle-Frank I think the patches have made Tom’s build a bit smoother than mine without the patches. Less chatter in front when it loads up. However I can confirm without any patches it works as well. I’m happy to help test any variants if you wish.
@Uncle-Frank Apologies for going AWOL…cleaned up the deployment and held back one unit for testing purposes and took a brief break to recover.
The efi files and ipxe files are straight from the SVN with no modifications. I only took the stock isc dhcpd.conf file and modified the items right after max-lease time as below:
default-lease-time 21600;
max-lease-time 43200;
# option domain-name-servers x.x.x.x;
# option routers x.x.x.x;
class "UEFI-32-1" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
filename "i386-efi/ipxe.efi";
}
class "UEFI-32-2" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
filename "i386-efi/ipxe.efi";
}
class "UEFI-64-1" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
filename "ipxe.efi";
}
class "UEFI-64-2" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
filename "ipxe.efi";
}
class "UEFI-64-3" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
filename "ipxe.efi";
}
class "Legacy" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
filename "undionly.kkpxe";
}
} <<< This one is the wrapping brace for the subnet x.x.x. netmask .x.x.x.x { at the beginning
Host Kernel: 4.2 x32 Sept 17 straight from FOG no mods
Host Primary disk: /dev/mmcblk0
Image type: Multi partition single disk (only one that works for me so far as I can’t build my own image due to the vendor’s preload)
bzImage32 - SVN 4586
init_32.xz: SVN 4586
In my fog configuration options (this is on a test box):
So far I’m using 32-bit for the Venue 8 and also other hardware I have and it works for me - we use mostly Dell gear with a dash of Lenovo in the mix.
I actually didn’t have to use the has usb nic parameter for any unit. I used the USB-0301 as mentioned earlier and it didn’t complain on any of the units I had imaged with FOG.
@Beber55 Looking at your screenshot and the wording, the reason for the RJ45 needing to be plugged is that you’ve got it set to DHCP instead of static IP.
For static IP, follow this guide: https://askubuntu.com/questions/766131/set-static-ip-ubuntu
The other option is, if Virtual Box supports it, set the interface as NAT’d so that you get another DHCP locally on your PC. I’ve not used Virtual Box in ages so I can’t confirm this.
@Sebastian-Roth said in Compatibility check for X1 Carbon 2018:
@AsGF2MX said in Compatibility check for X1 Carbon 2018:
I’m not using the default IP range on the fog server but the key seems to be using 192.x.x.x. I’m not sure how to get it to start imaging.
When creating the USB key there is a variable you need to change… here is an excerpt of the script:
... echo Create the grub configuration file cat > /mnt/boot/grub/grub.cfg << 'EOF' set myfogip=192.168.1.100 set myimage=/boot/bzImage set myinits=/boot/init.xz ....No need to recreate the USB key. Simply mount it and edit
boot/grub/grub.cfgon that key. Put in your FOG server’s IP and you should be fine. Manually register the host’s MAC, then simply schedule a task for it and boot right into the task via USB.
I do have to apologize for the delayed response as a lot happened:
Having said that, I managed to snag a T480 dock from one of our users who is off till the end of the week and the T480 dock fits the X1 Carbon perfectly and will even allow the native Ethernet pass through - this seems to be specific to the 8th gen machines as my own T470 doesn’t want fit this dock.
As I had expected, it works without any issue! My Fog 1.3.x works and the 1.5 is to be tested later.
In case it helps what didn’t work due to the X1/USB dongle issue:
What did work:
I just imaged the first X1. Though I didn’t get the fleet out for X’mas at least I should be able to get these out in time for the users to start with a fresh machine next year!
Hopefully this insight helps.
@george1421 said in Compatibility check for X1 Carbon 2018:
@AsGF2MX said in Compatibility check for X1 Carbon 2018:
Well I’m now at the USB method and @george1421 thanks for the img. I got the usb to work. However I can’t remember the cli for the fog command. and the wiki page has the deploy section empty.
Not sure why you need the debug command. You should schedule the task in the FOG server then usb boot the flash drive. Pick option 1 and it should boot into fos doing what ever the FOG server told it to do (capture/deploy).
I’m not using the default IP range on the fog server but the key seems to be using 192.x.x.x. I’m not sure how to get it to start imaging.
@AsGF2MX said in Compatibility check for X1 Carbon 2018:
@george1421 said in Compatibility check for X1 Carbon 2018:
Is there any chance to spin up a FOG 1.5.5 environment to see if the issue has already been resolved. 1.3.0 is somewhat old with old kernels and inits. Updating the kernel is not sufficient since you need the later inits too which are linked to the updated FOG server code.
X1 Carbons (i7-vPro) 2018 and right after the ram disk downloads
Can you explain this? is the ram disk you are talking about is the FOS init.xz file? Ensure that the firmware is up to date on the carbon devices. We’ve seen some pretty buggy firmware on early release systems that are addressed with firmware (BIOS) updates.It is the init.xz and the firmware is the latest - just built 1 week ago. I will have to re-check to see if there are any other updates. Is it just the kernel and init.xz that need to be swapped out? I did try to replace the pxe files with the latest one but it made no difference.
1.5.5 is on the cards but originally not till the X1s are out in the field. Having said that I had a fleet of T480 units that got imaged with no issue.
Unfortunately, I just stood up a 1.5.5 instance and even with no image and triggering a quick host register causes it to hang up. So I’m trying to see how to proceed.
@Sebastian-Roth I’m going to give the binaries a shot first.
I’m in tough spot timing wise - let me give the binary method a go first and see if it works. If yes, I’ll fastrack the planned rebuild of the FOG box. If not, 2 units have to go out by Friday while I can withhold the rest a bit longer. Definitely keen on getting it working.
@george1421 I should have mentioned in the original post it seems the 8th gen chips don’t play nice with legacy mode as it doesn’t even get as far as PXE booting - crashes out. Not sure exactly why as I have the I219 in 7th gen machines with no issue.
Secure boot is the first thing I disable as pretty much my entire fleet is UEFI - a mix of 4th to 7th gen i5 chips and now 8th gen chips as well.
I will keep the USB method as a plan C
EDIT:
Well I’m now at the USB method and @george1421 thanks for the img. I got the usb to work. However I can’t remember the cli for the fog command. and the wiki page has the deploy section empty.
@george1421 said in Compatibility check for X1 Carbon 2018:
Is there any chance to spin up a FOG 1.5.5 environment to see if the issue has already been resolved. 1.3.0 is somewhat old with old kernels and inits. Updating the kernel is not sufficient since you need the later inits too which are linked to the updated FOG server code.
X1 Carbons (i7-vPro) 2018 and right after the ram disk downloads
Can you explain this? is the ram disk you are talking about is the FOS init.xz file? Ensure that the firmware is up to date on the carbon devices. We’ve seen some pretty buggy firmware on early release systems that are addressed with firmware (BIOS) updates.
It is the init.xz and the firmware is the latest - just built 1 week ago. I will have to re-check to see if there are any other updates. Is it just the kernel and init.xz that need to be swapped out? I did try to replace the pxe files with the latest one but it made no difference.
1.5.5 is on the cards but originally not till the X1s are out in the field. Having said that I had a fleet of T480 units that got imaged with no issue.
I’ve just got a couple of X1 Carbons (i7-vPro) 2018 and right after the ram disk downloads, the machine freezes up and sits there before it auto reboots.
I’ve tried using the USB Type-C dock and the USB adapters which were wrongly shipped. Still waiting on the native connector for the I219.
I am unfortunately still running 1.3 so I have to ask if anyone has got this working and if so are there any special settings and which adapter are you using?
It actually prompted me to ask which interface to use. It had a default and gave me the option of picking another. So when asked I put in the ensXX entry. The FOG installer did pick this up correctly as I didn’t modify this afterwards.
Actually the way I’ve set mine up is that I have internet access on one interface and the other ties to an unrouted VLAN. Everything assigned into this VLAN is destroyed in one way or another - either imaged or wiped with FOG.
Log file snippet
/usr/bin/lsb_release
/bin/systemctl
There was no interface with an active internet connection found.
There was no interface with an active internet connection found.
Reading package lists...
Building dependency tree...
Reading state information...
software-properties-common is already the newest version (0.96.20.4).
python-software-properties is already the newest version (0.96.20.4).
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
19 Oct 18:24:22 ntpdate[43191]: adjust time server 118.103.146.184 offset -0.031116 sec
gpg: keyring `/tmp/tmpr942b0wr/secring.gpg' created
gpg: keyring `/tmp/tmpr942b0wr/pubring.gpg' created
gpg: requesting key E5267A6C from hkp server keyserver.ubuntu.com
gpg: /tmp/tmpr942b0wr/trustdb.gpg: trustdb created
gpg: key E5267A6C: public key "Launchpad PPA for Ondřej Surý" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
OK
Hit:1 http://hk.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://hk.archive.ubuntu.com/ubuntu xenial-updates InRelease [95.7 kB]
Hit:3 http://hk.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 http://hk.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [408 kB]
Get:5 http://hk.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [403 kB]
Get:6 http://hk.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [345 kB]
Get:7 http://hk.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [341 kB]
Hit:8 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease
Get:9 http://security.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Fetched 1,688 kB in 1s (1,326 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
ntpdate is already the newest version (1:4.2.8p4+dfsg-3ubuntu5.3).
software-properties-common is already the newest version (0.96.20.4).
python-software-properties is already the newest version (0.96.20.4).
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
19 Oct 18:24:39 ntpdate[43465]: adjust time server 118.103.146.184 offset -0.023868 sec
Generating locales (this might take a while)...
en_US.UTF-8... done
Generation complete.
gpg: keyring `/tmp/tmprqkb_8ft/secring.gpg' created
gpg: keyring `/tmp/tmprqkb_8ft/pubring.gpg' created
gpg: requesting key E5267A6C from hkp server keyserver.ubuntu.com
gpg: /tmp/tmprqkb_8ft/trustdb.gpg: trustdb created
gpg: key E5267A6C: public key "Launchpad PPA for Ondřej Surý" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
OK
Hit:1 http://hk.archive.ubuntu.com/ubuntu xenial InRelease
Hit:2 http://hk.archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:3 http://hk.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 http://security.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Hit:5 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease
Fetched 94.5 kB in 1s (89.1 kB/s)
Reading package lists...
ii apache2 2.4.18-2ubuntu3.1 amd64 Apache HTTP Server
ii bc 1.06.95-9build1 amd64 GNU bc arbitrary precision calculator language
ii build-essential 12.1ubuntu2 amd64 Informational list of build-essential packages
ii cpp 4:5.3.1-1ubuntu1 amd64 GNU C preprocessor (cpp)
ii curl 7.47.0-1ubuntu2.1 amd64 command line tool for transferring data with URL syntax
ii g++ 4:5.3.1-1ubuntu1 amd64 GNU C++ compiler
ii gawk 1:4.1.3+dfsg-0.1 amd64 GNU awk, a pattern scanning and processing language
ii gcc 4:5.3.1-1ubuntu1 amd64 GNU C compiler
ii gzip 1.6-4ubuntu1 amd64 GNU compression utilities
ii htmldoc 1.8.27-8ubuntu1 amd64 HTML processor that generates indexed HTML, PS, and PDF
ii lftp 4.6.3a-1build2 amd64 Sophisticated command-line FTP/HTTP/BitTorrent client programs
ii libapache2-mod-php7.0 7.0.12-1+deb.sury.org~xenial+1 amd64 server-side, HTML-embedded scripting language (Apache 2 module)
ii libc6:amd64 2.23-0ubuntu3 amd64 GNU C Library: Shared libraries
ii libcurl3:amd64 7.47.0-1ubuntu2.1 amd64 easy-to-use client-side URL transfer library (OpenSSL flavour)
ii m4 1.4.17-5 amd64 macro processing language
ii mysql-client 5.7.15-0ubuntu0.16.04.1 all MySQL database client (metapackage depending on the latest version)
mysql-server-5.7
mysql-server
mysql-server-core-5.7
ii mysql-server 5.7.15-0ubuntu0.16.04.1 all MySQL database server (metapackage depending on the latest version)
ii net-tools 1.60-26ubuntu1 amd64 NET-3 networking toolkit
ii nfs-kernel-server 1:1.2.8-9ubuntu12 amd64 support for NFS kernel server
ii openssh-server 1:7.2p2-4ubuntu2.1 amd64 secure shell (SSH) server, for secure access from remote machines
ii php7.0 7.0.12-1+deb.sury.org~xenial+1 all server-side, HTML-embedded scripting language (metapackage)
ii php7.0-bcmath 7.0.12-1+deb.sury.org~xenial+1 amd64 Bcmath module for PHP
ii php7.0-cli 7.0.12-1+deb.sury.org~xenial+1 amd64 command-line interpreter for the PHP scripting language
ii php7.0-curl 7.0.12-1+deb.sury.org~xenial+1 amd64 CURL module for PHP
ii php7.0-fpm 7.0.12-1+deb.sury.org~xenial+1 amd64 server-side, HTML-embedded scripting language (FPM-CGI binary)
ii php7.0-gd 7.0.12-1+deb.sury.org~xenial+1 amd64 GD module for PHP
php7.0-json
ii php7.0-json 7.0.12-1+deb.sury.org~xenial+1 amd64 JSON module for PHP
ii php7.0-ldap 7.0.12-1+deb.sury.org~xenial+1 amd64 LDAP module for PHP
ii php7.0-mbstring 7.0.12-1+deb.sury.org~xenial+1 amd64 MBSTRING module for PHP
ii php7.0-mcrypt 7.0.12-1+deb.sury.org~xenial+1 amd64 libmcrypt module for PHP
php7.0-mysql
ii php7.0-mysql 7.0.12-1+deb.sury.org~xenial+1 amd64 MySQL module for PHP
ii php-gettext 1.0.11-2+deb.sury.org~xenial+1 all read gettext MO files directly, without requiring anything other than PHP
ii sysv-rc-conf 0.99-7 all SysV init runlevel configuration tool for the terminal
ii tar 1.28-2.1 amd64 GNU version of the tar archiving utility
ii tftpd-hpa 5.2+20150808-1ubuntu1 amd64 HPA's tftp server
ii tftp-hpa 5.2+20150808-1ubuntu1 amd64 HPA's tftp client
ii vsftpd 3.0.3-3ubuntu2 amd64 lightweight, efficient FTP server written for security
ii wget 1.17.1-1ubuntu1.1 amd64 retrieves files from the web
ii xinetd 1:2.3.15-6 amd64 replacement for inetd with many enhancements
ii zlib1g:amd64 1:1.2.8.dfsg-2ubuntu4 amd64 compression library - runtime
Reading package lists...
Building dependency tree...
Reading state information...
bc is already the newest version (1.06.95-9build1).
build-essential is already the newest version (12.1ubuntu2).
cpp is already the newest version (4:5.3.1-1ubuntu1).
g++ is already the newest version (4:5.3.1-1ubuntu1).
gawk is already the newest version (1:4.1.3+dfsg-0.1).
gcc is already the newest version (4:5.3.1-1ubuntu1).
gzip is already the newest version (1.6-4ubuntu1).
lftp is already the newest version (4.6.3a-1build2).
libc6 is already the newest version (2.23-0ubuntu3).
m4 is already the newest version (1.4.17-5).
net-tools is already the newest version (1.60-26ubuntu1).
nfs-kernel-server is already the newest version (1:1.2.8-9ubuntu12).
tar is already the newest version (1.28-2.1).
tftp-hpa is already the newest version (5.2+20150808-1ubuntu1).
tftpd-hpa is already the newest version (5.2+20150808-1ubuntu1).
vsftpd is already the newest version (3.0.3-3ubuntu2).
xinetd is already the newest version (1:2.3.15-6).
zlib1g is already the newest version (1:1.2.8.dfsg-2ubuntu4).
htmldoc is already the newest version (1.8.27-8ubuntu1).
sysv-rc-conf is already the newest version (0.99-7).
apache2 is already the newest version (2.4.18-2ubuntu3.1).
curl is already the newest version (7.47.0-1ubuntu2.1).
libcurl3 is already the newest version (7.47.0-1ubuntu2.1).
mysql-client is already the newest version (5.7.15-0ubuntu0.16.04.1).
mysql-server is already the newest version (5.7.15-0ubuntu0.16.04.1).
openssh-server is already the newest version (1:7.2p2-4ubuntu2.1).
wget is already the newest version (1.17.1-1ubuntu1.1).
php-gettext is already the newest version (1.0.11-2+deb.sury.org~xenial+1).
libapache2-mod-php7.0 is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-cli is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-fpm is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-curl is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-gd is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-ldap is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-mcrypt is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0 is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-json is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-mysql is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-bcmath is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
php7.0-mbstring is already the newest version (7.0.12-1+deb.sury.org~xenial+1).
Calculating upgrade...
The following packages will be upgraded:
distro-info-data
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 4,006 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 http://hk.archive.ubuntu.com/ubuntu xenial-updates/main amd64 distro-info-data all 0.28ubuntu0.2 [4,006 B]
Fetched 4,006 B in 0s (330 kB/s)
(Reading database ... 100362 files and directories currently installed.)
Preparing to unpack .../distro-info-data_0.28ubuntu0.2_all.deb ...
Unpacking distro-info-data (0.28ubuntu0.2) over (0.28ubuntu0.1) ...
Setting up distro-info-data (0.28ubuntu0.2) ...
ii apache2 2.4.18-2ubuntu3.1 amd64 Apache HTTP Server
ii bc 1.06.95-9build1 amd64 GNU bc arbitrary precision calculator language
ii build-essential 12.1ubuntu2 amd64 Informational list of build-essential packages
ii cpp 4:5.3.1-1ubuntu1 amd64 GNU C preprocessor (cpp)
ii curl 7.47.0-1ubuntu2.1 amd64 command line tool for transferring data with URL syntax
ii g++ 4:5.3.1-1ubuntu1 amd64 GNU C++ compiler
ii gawk 1:4.1.3+dfsg-0.1 amd64 GNU awk, a pattern scanning and processing language
ii gcc 4:5.3.1-1ubuntu1 amd64 GNU C compiler
ii gzip 1.6-4ubuntu1 amd64 GNU compression utilities
ii htmldoc 1.8.27-8ubuntu1 amd64 HTML processor that generates indexed HTML, PS, and PDF
ii lftp 4.6.3a-1build2 amd64 Sophisticated command-line FTP/HTTP/BitTorrent client programs
ii libapache2-mod-php7.0 7.0.12-1+deb.sury.org~xenial+1 amd64 server-side, HTML-embedded scripting language (Apache 2 module)
ii libc6:amd64 2.23-0ubuntu3 amd64 GNU C Library: Shared libraries
ii libcurl3:amd64 7.47.0-1ubuntu2.1 amd64 easy-to-use client-side URL transfer library (OpenSSL flavour)
ii m4 1.4.17-5 amd64 macro processing language
ii mysql-client 5.7.15-0ubuntu0.16.04.1 all MySQL database client (metapackage depending on the latest version)
ii mysql-server 5.7.15-0ubuntu0.16.04.1 all MySQL database server (metapackage depending on the latest version)
ii mysql-server 5.7.15-0ubuntu0.16.04.1 all MySQL database server (metapackage depending on the latest version)
ii net-tools 1.60-26ubuntu1 amd64 NET-3 networking toolkit
ii nfs-kernel-server 1:1.2.8-9ubuntu12 amd64 support for NFS kernel server
ii openssh-server 1:7.2p2-4ubuntu2.1 amd64 secure shell (SSH) server, for secure access from remote machines
ii php7.0 7.0.12-1+deb.sury.org~xenial+1 all server-side, HTML-embedded scripting language (metapackage)
ii php7.0-bcmath 7.0.12-1+deb.sury.org~xenial+1 amd64 Bcmath module for PHP
ii php7.0-cli 7.0.12-1+deb.sury.org~xenial+1 amd64 command-line interpreter for the PHP scripting language
ii php7.0-curl 7.0.12-1+deb.sury.org~xenial+1 amd64 CURL module for PHP
ii php7.0-fpm 7.0.12-1+deb.sury.org~xenial+1 amd64 server-side, HTML-embedded scripting language (FPM-CGI binary)
ii php7.0-gd 7.0.12-1+deb.sury.org~xenial+1 amd64 GD module for PHP
ii php7.0-json 7.0.12-1+deb.sury.org~xenial+1 amd64 JSON module for PHP
ii php7.0-json 7.0.12-1+deb.sury.org~xenial+1 amd64 JSON module for PHP
ii php7.0-ldap 7.0.12-1+deb.sury.org~xenial+1 amd64 LDAP module for PHP
ii php7.0-mbstring 7.0.12-1+deb.sury.org~xenial+1 amd64 MBSTRING module for PHP
ii php7.0-mcrypt 7.0.12-1+deb.sury.org~xenial+1 amd64 libmcrypt module for PHP
ii php7.0-mysql 7.0.12-1+deb.sury.org~xenial+1 amd64 MySQL module for PHP
ii php-gettext 1.0.11-2+deb.sury.org~xenial+1 all read gettext MO files directly, without requiring anything other than PHP
ii sysv-rc-conf 0.99-7 all SysV init runlevel configuration tool for the terminal
ii tar 1.28-2.1 amd64 GNU version of the tar archiving utility
ii tftpd-hpa 5.2+20150808-1ubuntu1 amd64 HPA's tftp server
ii tftp-hpa 5.2+20150808-1ubuntu1 amd64 HPA's tftp client
ii vsftpd 3.0.3-3ubuntu2 amd64 lightweight, efficient FTP server written for security
ii wget 1.17.1-1ubuntu1.1 amd64 retrieves files from the web
ii xinetd 1:2.3.15-6 amd64 replacement for inetd with many enhancements
ii zlib1g:amd64 1:1.2.8.dfsg-2ubuntu4 amd64 compression library - runtime
Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully
Failed to stop FOGMulticastManager.service: Unit FOGMulticastManager.service not loaded.
Failed to stop FOGImageReplicator.service: Unit FOGImageReplicator.service not loaded.
Failed to stop FOGSnapinReplicator.service: Unit FOGSnapinReplicator.service not loaded.
Failed to stop FOGScheduler.service: Unit FOGScheduler.service not loaded.
Failed to stop FOGPingHosts.service: Unit FOGPingHosts.service not loaded.
Synchronizing state of mysql.service with SysV init with /lib/systemd/systemd-sysv-install...
Executing /lib/systemd/systemd-sysv-install enable mysql
● mysql.service - MySQL Community Server
Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2016-10-19 18:24:57 HKT; 2s ago
Process: 44174 ExecStartPost=/usr/share/mysql/mysql-systemd-start post (code=exited, status=0/SUCCESS)
Process: 44168 ExecStartPre=/usr/share/mysql/mysql-systemd-start pre (code=exited, status=0/SUCCESS)
Main PID: 44173 (mysqld)
Tasks: 28
Memory: 165.5M
CPU: 224ms
CGroup: /system.slice/mysql.service
└─44173 /usr/sbin/mysqld
Oct 19 18:24:56 MYFOGSERVER systemd[1]: Starting MySQL Community Server...
Oct 19 18:24:57 MYFOGSERVER systemd[1]: Started MySQL Community Server.
Site 001-fog disabled.
To activate the new configuration, you need to run:
service apache2 reload
mysqlnd
mcrypt
apache2.service is not a native service, redirecting to systemd-sysv-install
Executing /lib/systemd/systemd-sysv-install enable apache2
Synchronizing state of php7.0-fpm.service with SysV init with /lib/systemd/systemd-sysv-install...
Executing /lib/systemd/systemd-sysv-install enable php7.0-fpm
Generating RSA private key, 4096 bit long modulus
.......++
.............++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:State or Province Name (full name) [Some-State]:Locality Name (eg, city) []:Organization Name (eg, company) [Internet Widgits Pty Ltd]:Organizational Unit Name (eg, section) []:Common Name (e.g. server FQDN or YOUR name) []:Email Address []:Generating RSA private key, 4096 bit long modulus
..........................................................................++
............................................++
e is 65537 (0x10001)
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:State or Province Name (full name) [Some-State]:Locality Name (eg, city) []:Organization Name (eg, company) [Internet Widgits Pty Ltd]:Organizational Unit Name (eg, section) []:Common Name (e.g. server FQDN or YOUR name) []:Email Address []:
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:An optional company name []:Signature ok
subject=/CN=192.168.1.42/emailAddress=192.168.2.48
Getting CA Private Key
ln: failed to create symbolic link '/var/www/html/fog/fog': File exists
ERROR: Module php does not exist!
Module rewrite already enabled
Considering dependency setenvif for ssl:
Module setenvif already enabled
Considering dependency mime for ssl:
Module mime already enabled
Considering dependency socache_shmcb for ssl:
Module socache_shmcb already enabled
Module ssl already enabled
Enabling site 001-fog.
To activate the new configuration, you need to run:
service apache2 reload
Job for apache2.service failed because the control process exited with error code. See "systemctl status apache2.service" and "journalctl -xe" for details.
● apache2.service - LSB: Apache2 web server
Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
Drop-In: /lib/systemd/system/apache2.service.d
└─apache2-systemd.conf
Active: failed (Result: exit-code) since Wed 2016-10-19 18:27:50 HKT; 2s ago
Docs: man:systemd-sysv-generator(8)
Process: 44521 ExecStart=/etc/init.d/apache2 start (code=exited, status=1/FAILURE)
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: * The apache2 configtest failed.
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: Output of config test was:
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: AH00526: Syntax error on line 4 of /etc/apache2/sites-enabled/001-fog.conf:
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: Invalid command '192.168.2.48', perhaps misspelled or defined by a module not included in the server configuration
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: Action 'configtest' failed.
Oct 19 18:27:50 MYFOGSERVER apache2[44521]: The Apache error log may have more information.
Oct 19 18:27:50 MYFOGSERVER systemd[1]: apache2.service: Control process exited, code=exited status=1
Oct 19 18:27:50 MYFOGSERVER systemd[1]: Failed to start LSB: Apache2 web server.
Oct 19 18:27:50 MYFOGSERVER systemd[1]: apache2.service: Unit entered failed state.
Oct 19 18:27:50 MYFOGSERVER systemd[1]: apache2.service: Failed with result 'exit-code'.
● php7.0-fpm.service - The PHP 7.0 FastCGI Process Manager
Loaded: loaded (/lib/systemd/system/php7.0-fpm.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2016-10-19 18:27:50 HKT; 2s ago
Docs: man:php-fpm7.0(8)
Main PID: 44527 (php-fpm7.0)
Status: "Ready to handle connections"
Tasks: 3
Memory: 19.5M
CPU: 35ms
CGroup: /system.slice/php7.0-fpm.service
├─44527 php-fpm: master process (/etc/php/7.0/fpm/php-fpm.conf)
├─44535 php-fpm: pool www
└─44536 php-fpm: pool www
Oct 19 18:27:50 MYFOGSERVER systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Oct 19 18:27:50 MYFOGSERVER systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
We have outbound ping blocked so I won’t be able to produce those. IP address was manually assigned before and I’ve done a find and replace on the IP addresses but it should give you a pretty good idea.
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:50:56:ac:39:98 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.42/24 brd 192.168.1.255 scope global ens192
valid_lft forever preferred_lft forever
inet6 fe80::250:56ff:feac:3998/64 scope link
valid_lft forever preferred_lft forever
3: ens224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:50:56:ac:7a:a4 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.48/24 brd 192.168.2.255 scope global ens224
valid_lft forever preferred_lft forever
inet6 fe80::250:56ff:feac:7aa4/64 scope link
valid_lft forever preferred_lft forever
----
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 ens192
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ens192
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 ens224
@Tom-Elliott Was this file originally missing? It didn’t exist in my git pull. Or is there some process which creates it?
@Wayne-Workman I actually did do sudo -I first then launched screen as root and setup everything inside this.
The only thing is that my VM is dual homed. Despite the fact that I had specified the interface the script did have an issue with the apache configuration as it added both IPs although I had picked just one interface. However the only error was in the last step where it failed to start apache.
I did a fresh install of 16.04LTS with LAMP, SSH server and then did a git pull. The install script installed the base but didn’t install UDPCast package. Oddly enough it didn’t install the services correctly either. However, I was able to get everything working properly after some tinkering. However I’m not seeing any steps on setting this up so here are the steps I took.
Getting the Service files copied and configured
SRC: /root/fogproject/packages/systemd/FOGMulticastManager.service
TO: /lib/systemd/system/FOGMulticastManager.service
SRC: /root/fogproject/packages/service/
TO: /opt/fog/service/
SRC: /root/fogproject/packages/service/etc/
TO: /opt/fog/service/etc/
Installing udp-sender
sudo apt-get install udpcast
Config files I modified
/opt/fog/service/lib/service_lib.php
Change:
require WEBROOT.‘/commons/init.php’;
TO:
require ‘/var/www/html/fog/commons/init.php’;
This file was missing in my gitpull: /opt/fog/service/etc/config.php
<?php
define( "UPDSENDERPATH", "/usr/bin/udp-sender" );
define( "MULTICASTLOGPATH", "/opt/fog/log/multicast.log" );
define( "MULTICASTDEVICEOUTPUT", "/dev/tty2" );
define( "MULTICASTSLEEPTIME", 10 );
define( "MULTICASTINTERFACE", "ens224" );
define( "UDPSENDER_MAXWAIT", null );
define( "MYSQL_HOST", "" );
define( "MYSQL_DATABASE", "fog" );
define( "MYSQL_USERNAME", "root" );
define( "MYSQL_PASSWORD", "" );
define( "LOGMAXSIZE", "1000000" );
define( "REPLICATORLOGPATH", "/opt/fog/log/fogreplicator.log" );
define( "REPLICATORDEVICEOUTPUT", "/dev/tty3" );
define( "REPLICATORSLEEPTIME", 600 );
define( "REPLICATORIFCONFIG", "/sbin/ifconfig" );
define( "SCHEDULERLOGPATH", "/opt/fog/log/fogscheduler.log" );
define( "SCHEDULERDEVICEOUTPUT", "/dev/tty4" );
define( "SCHEDULERWEBROOT", "/var/www/html/fog" );
define( "SCHEDULERSLEEPTIME", 60 );
?>
Then:
service FOGMulticastManager start
service FOGMulticastManager status
If i’ts running, schedule a multicast task and you’ll be good to go. Multicast started working without issue after this.
However, is this procedure correct?
@Tom-Elliott I’m wondering if the new install script is missing something (haven’t had a chance to go through it). This was a clean build to replace my previous FOG VM and it was a comparison between VER 45XX and the one mentioned above.
@Uncle-Frank Apologies for going AWOL…cleaned up the deployment and held back one unit for testing purposes and took a brief break to recover.
The efi files and ipxe files are straight from the SVN with no modifications. I only took the stock isc dhcpd.conf file and modified the items right after max-lease time as below:
default-lease-time 21600;
max-lease-time 43200;
# option domain-name-servers x.x.x.x;
# option routers x.x.x.x;
class "UEFI-32-1" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
filename "i386-efi/ipxe.efi";
}
class "UEFI-32-2" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
filename "i386-efi/ipxe.efi";
}
class "UEFI-64-1" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
filename "ipxe.efi";
}
class "UEFI-64-2" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
filename "ipxe.efi";
}
class "UEFI-64-3" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
filename "ipxe.efi";
}
class "Legacy" {
match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
filename "undionly.kkpxe";
}
} <<< This one is the wrapping brace for the subnet x.x.x. netmask .x.x.x.x { at the beginning
Host Kernel: 4.2 x32 Sept 17 straight from FOG no mods
Host Primary disk: /dev/mmcblk0
Image type: Multi partition single disk (only one that works for me so far as I can’t build my own image due to the vendor’s preload)
bzImage32 - SVN 4586
init_32.xz: SVN 4586
In my fog configuration options (this is on a test box):
So far I’m using 32-bit for the Venue 8 and also other hardware I have and it works for me - we use mostly Dell gear with a dash of Lenovo in the mix.
I actually didn’t have to use the has usb nic parameter for any unit. I used the USB-0301 as mentioned earlier and it didn’t complain on any of the units I had imaged with FOG.