@Wayne-Workman Ah. Thank you. In hindsight I probably could have saved some trouble by copying the dev folder out of the previous /images (now /oldImages) directory. I just copied the image I knew I needed to keep and then created a new dev directory. Just should’ve copied both

Troubleshoot NFS

@Tom-Elliott …So apparently the .mntcheck file goes inside /images/dev and not just under /images? Was that really what I did wrong? facepalm

Is it just that .mntcheck should be under /images/dev or should it be in both /images/dev and /images?

It works now.

Thank you both so much for your valuable assistance! Keep up the good work!

@Wayne-Workman said in Trouble after adding storage to /images:

find /images | grep .mntcheck

Output of find /images | grep .mntcheck is

/images/.mntcheck

Out put of ls -lahRt /imagesis

/images:
total 36K
drwxr-xr-x  6 fog  root 4.0K Jun 15 14:55 .
drwxrwxrwx  2 fog  root 4.0K Jun 15 14:55 dev
drwxr-xr-x 26 root root 4.0K Jun 15 14:07 ..
-rwxrwxrwx  1 fog  root    0 Jun 15 14:04 .mntcheck
drwxrwxrwx  2 fog  root  16K Jun 15 13:56 lost+found
drwxrwxrwx  2 fog  root 4.0K May 26 09:34 MultiKiosk
drwxrwxrwx  2 fog  root 4.0K May 11 10:32 postdownloadscripts
/images/dev:
total 8.0K
drwxr-xr-x 6 fog root 4.0K Jun 15 14:55 ..
drwxrwxrwx 2 fog root 4.0K Jun 15 14:55 .
/images/lost+found:
total 20K
drwxr-xr-x 6 fog root 4.0K Jun 15 14:55 ..
drwxrwxrwx 2 fog root  16K Jun 15 13:56 .
/images/MultiKiosk:
total 1.8G
drwxr-xr-x 6 fog root 4.0K Jun 15 14:55 ..
-rwxr-xr-x 1 fog root   47 May 26 09:34 d1.original.swapuuids
-rwxr-xr-x 1 fog root  512 May 26 09:34 d1p2.ebr
drwxrwxrwx 2 fog root 4.0K May 26 09:34 .
-rwxr-xr-x 1 fog root 1.8G May 26 09:34 d1p1.img
-rwxr-xr-x 1 fog root  512 May 26 09:27 d1p5.ebr
-rwxr-xr-x 1 fog root  250 May 26 09:27 d1.minimum.partitions
-rwxr-xr-x 1 fog root 1.0M May 26 09:27 d1.mbr
-rwxr-xr-x 1 fog root    0 May 26 09:27 d1.has_grub
-rwxr-xr-x 1 fog root   16 May 26 09:27 d1.original.fstypes
-rwxr-xr-x 1 fog root  250 May 26 09:27 d1.partitions
-rwxr-xr-x 1 fog root    4 May 26 09:27 d1.fixed_size_partitions
/images/postdownloadscripts:
total 12K
drwxr-xr-x 6 fog root 4.0K Jun 15 14:55 ..
drwxrwxrwx 2 fog root 4.0K May 11 10:32 .
-rwxr-xr-x 1 fog root  233 May 11 10:32 fog.postdownload

As you can see I do have one small image called MultiKiosk that is stored here already. I’m trying to capture a new Windows7 image right now.

@george1421 @Tom-Elloitt

Content of /etc/exports

/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

Output of showmount -e 127.0.0.1

Export list for 127.0.0.1:
/images/dev *
/images     *

I still get the message from the client saying:
“Could not verify mount point. Check if .mntcheck exists (/bin/fog.upload)”
Computer will reboot in 1 minute

@george1421

My output is as follows. Note that I changed the second line from /images/dev to /images. I assume that’s not what I was supposed to do.

fogadmin@fogserver:~$ cat /etc/exports
/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1) 

As you mentioned in your reply I should probably see the /images/dev share in the output of showmount. How should I go about adding that new share?

@george1421 This makes sense. What is the proper way to add the share? Thanks

@Tom-Elliott

I did a screenshot and coped the text from the picture using OneNote. OCR’s fault I updated the output of sudo mount (reply below) using copy-paste over ssh.

Output of sudo mount /dev/sdb1 /images is

mount: /dev/sdb1 already mounted or /images busy
mount: according to mtab, /dev/sdb1 is already mounted in /images

@Tom-Elliott

Output of sudo mount

/dev/mapper/fogserver--vg-root on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sdb1 on /images type ext3 (rw)
/dev/sda1 on /boot type ext2 (rw)
rpc_pipefs on /run/rpc_pipefs type rpc_pipefs (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
nfsd on /proc/fs/nfsd type nfsd (rw)
vmware-vmblock on /run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)```

@george1421

The output of showmount -e 127.0.0.1 is

Export list for 127.0.0.1
/images *

@Tom-Elliott Thank you for your reply. I looked in /etc/exports and it was pointing at /images and /images/dev I’m pretty sure there’s nothing on /images/dev but the new drive is mounted at /images.

I tried changing both to point at /images and got the same result. I’m not sure if I did that right or not, but you’re right about the /etc/exports file.