<![CDATA[Problem while deploying image]]>Server
  • FOG Version: 1.3.0
  • OS: Ubuntu 14.04
Client
  • Service Version:
  • OS:
Description

Have updated from 0.32 to 1.20 in summer. Then recently. I’ve updated again to 1.3.0. installation went fine with no issues. Uploaded the image files (using ftp) to home/fog/images and tried to deploy. Mid-image, I get:

… volume file
/stdin.001

: corrupted – invalid deflate data (invalid block type)
pigz: bort: internal … s error

Will upload picture soon.

Thanks

EDIT:

Images worked fine on 1.2.0 with no issues

]]>http://forums.fogproject.org/topic/8897/problem-while-deploying-imageRSS for NodeThu, 08 Oct 2026 00:33:12 GMTFri, 04 Nov 2016 14:48:39 GMT60<![CDATA[Reply to Problem while deploying image on Thu, 10 Nov 2016 20:19:19 GMT]]>Hi guys,

First of all, thanks for your support and patience.

Fortunately, I found what was wrong with the images.

Unfortunately, I had to put the server down and start a new on a slightly newer server which had been collecting dust.

The issue here was that the hard drives were failing and a number of sectors were found with errors. The server was from 2006 and I’m pretty sure the hard drives were the same age…

The image I had was transferred from 0.32, to 1.20 then to 1.30 using part image and moved using FTP. I’ve recaptured the original images using part clone on 1.3.0 with the newer server and decided to start from scratch.

Thanks again for your help. It’s very much appreciated.

]]>http://forums.fogproject.org/post/83128http://forums.fogproject.org/post/83128Thu, 10 Nov 2016 20:19:19 GMT<![CDATA[Reply to Problem while deploying image on Fri, 04 Nov 2016 16:38:28 GMT]]>What version of fog was used to capture this particular image?

Also, is the problem with all images, or just this one?

Please post a photo of the error so we can see the entire monitor and other information it’s displaying.

]]>http://forums.fogproject.org/post/82660http://forums.fogproject.org/post/82660Fri, 04 Nov 2016 16:38:28 GMT<![CDATA[Reply to Problem while deploying image on Fri, 04 Nov 2016 15:09:38 GMT]]>Typically, This would indicate a problem with the image. The scripts managing imaging may have changed, but the way the data is stored/used (while a bit of compatibility was needed first) hasn’t changed when it comes to handling deployments.

Seeing as you stated you uploaded the images how did you go about this? Did they properly upload? If you still have the original, if you do a checksum comparison between the original the uploaded file (on the new server) do they match?

Where is /stdin.001 coming in? FOG now uses /tmp/pigz1 as the location in memory via a FIFO system to handle the incoming data flow.

]]>http://forums.fogproject.org/post/82645http://forums.fogproject.org/post/82645Fri, 04 Nov 2016 15:09:38 GMT