Reply to After clone error "image not partclone" on Thu, 18 Dec 2014 15:57:13 GMT

Tom Elliott — Thu, 18 Dec 2014 15:57:13 GMT

[quote=“Joe Taylor, post: 40119, member: 27608”]Hi,

After cloning a machine using partclone within FOG which clones fine but when deploying and it restores around 3 images the last image it does it errors out and says the image isn’t a partclone image - but it is

:MENU
menu
item --gap Please Select one of the images below
item fog.local Boot from hard disk
item img1 Dell Windows 7 x64 Pro
item img3 Dell Windows 7 x64 Pro old
item img2 Lenovo Windows 7 x64 Pro
item return Return to main menu
choose --default fog.local target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:img1
kernel bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.1 web=${fog-ip}/fog/ consoleblank=0 shutdown=1 loglevel=4 type=down imgid=1 img=dell ftp=${fog-ip} imgType=mpa osid=5 storage=192.168.1.1:/images/ capone=1 imgFormat=0
imgfetch init.xz
boot || goto MENU
:img2
kernel bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.1 web=${fog-ip}/fog/ consoleblank=0 shutdown=1 loglevel=4 type=down imgid=2 img=Lenovo ftp=${fog-ip} imgType=mpa osid=5 storage=192.168.1.1:/images/ capone=1 imgFormat=0
imgfetch init.xz
boot || goto MENU
:img3
kernel bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.1 web=${fog-ip}/fog/ consoleblank=0 shutdown=1 loglevel=4 type=down imgid=139 img=Dell3030 ftp=${fog-ip} imgType=mps osid=5 storage=192.168.1.1:/images/ capone=1 imgFormat=0
imgfetch init.xz
boot || goto MENU
:return
chain [url]http://${fog-ip}/${fog-webroot}/service/ipxe/boot.php?mac=mac=00:00:00:00:00:00[/url] || goto MENU
autoboot

I’m using an advanced pxe menu; the image i’m using comes under [B]img3[/B][/quote]

Can you try setting imgFormat=1 and see if that helps you out?

Reply to After clone error "image not partclone" on Thu, 18 Dec 2014 15:52:22 GMT

Wolfbane8653 — Thu, 18 Dec 2014 15:52:22 GMT

You know upgrading to the trunk will give you a better “Quick Image”. If you do upgrade you can hit “Quick Image” and then it will show the image listing. Thus no need to be doing what your trying to do. BUT there still be [U]may[/U] an issue with your img3 Image.

[url]http://fogproject.org/wiki/index.php/Upgrade_to_trunk[/url]