Web interface doesn't open after updating to 1.2



  • Hello,

    Update from 0.32 to 1.2 seemed to go fine, the installer didn’t report any problems. After completing the update and rebooting the ubuntu server, the fog web interface does not load. Any advice you can offer is greatly appreciated. Thanks!



  • Just tried reinstalling CentOS 6.6 and it gave the same error. I’m going to try CentOS 7 later today when I have more time.


  • Senior Developer

    Looks like he did.


  • Developer

    Can you post your install log?



  • Ok I uninstalled apache2 then ran the fog install script again. Failed at the same spot. Then I tried uninstalling apache2, php, MySQL, and HTTPD. Ran the fog installer again. Failed again in same spot.

    Edit: Here’s the install log:

    Version: 1.2.0 Installer/Updater

    What version of Linux would you like to run the installation for?

          1) Redhat Based Linux (Redhat, CentOS, Mageia) 
          2) Debian Based Linux (Debian, Ubuntu, Kubuntu, Edubuntu) 
    

    Choice: [1]

    Staring Redhat / CentOS Installation.
    …/lib/redhat/functions.sh: line 1: n#: command not found

    FOG Server installation modes:
    * Normal Server: (Choice N)
    This is the typical installation type and
    will install all FOG components for you on this
    machine. Pick this option if you are unsure what to pick.

      * Storage Node: (Choice S) 
          This install mode will only install the software required 
          to make this server act as a node in a storage group 
    

    More information:
    [URL=‘http://www.fogproject.org/wiki/index.php?title=InstallationModes’][U][COLOR=#1155cc]http://www.fogproject.org/[/COLOR][/U]wiki/index.php?title=InstallationModes[/URL][COLOR=#555555]

    What type of installation would you like to do? [N]

    What is the IP address to be used by this FOG Server? [10.1.0.109]

    Would you like to setup a router address for the DHCP server? [Y/n]
    What is the IP address to be used for the router on the DHCP server? [10.1.0.1]

    Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n]
    What is the IP address to be used for DNS on the DHCP server and client boot image? [10.1.0.99]

    Would you like to change the default network interface from eth0?
    If you are not sure, select No. [y/N]

    Would you like to use the FOG server for DHCP service? [Y/n] n

    This version of FOG has internationalization support, would
    you like to install the additional language packs? [y/N]

    Would you like to donate computer resources to the FOG Project
    to mine cryptocurrency? This will only take place during active
    tasks and should NOT have any impact on performance of your
    imaging or other tasks. The currency will be used to pay for
    FOG Project expenses and to support the core developers working
    on the project. For more information see:

    [/COLOR][url]http://fogproject.org/?q=cryptocurrency[/url][COLOR=#555555]

    Would you like to donate computer resources to the FOG Project? [y/N]

    ##############################[/COLOR]#######################################

    FOG now has everything it needs to setup your server, but please
    understand that this script will overwrite any setting you may
    have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.

    This script should be run by the root user on Redhat or with sudo on Ubuntu.

    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at [URL=‘http://www.fogproject.org/wiki’][U][COLOR=#1155cc]http://www.fogproject.org/wiki[/COLOR][/U][/URL]

    Here are the settings FOG will use:
    Base Linux: Redhat
    Detected Linux Distribution: CentOS
    Installation Type: Normal Server
    Server IP Address: 10.1.0.109
    DHCP router Address: 10.1.0.1
    DHCP DNS Address: 10.1.0.99
    Interface: eth0
    Using FOG DHCP: 0
    Internationalization: 0
    Donate: 0

         DHCP will NOT be setup but you must setup your 
         current DHCP server to use FOG for PXE services. 
    
         On a Linux DHCP server you must set: 
             next-server 
    
         On a Windows DHCP server you must set: 
             option 066 & 067 
    
           Option 066 is the IP of the FOG Server: (e.g. 10.1.0.109) 
           Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe) 
    

    Are you sure you wish to continue (Y/N) y

    Installation Started…

    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Packages to be installed: httpd php php-cli php-common php-gd php-mysql mysql mysql-server tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ lftp

    • Installing package: httpd

    • Installing package: php

    • Skipping package: php-cli (Already installed)

    • Skipping package: php-common (Already installed)

    • Skipping package: php-gd (Already installed)

    • Installing package: php-mysql

    • Installing package: mysql
      Existing lock /var/run/yum.pid: another copy is running as pid 4777.
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 19 M RSS (105 MB VSZ)
      Started: Fri Jan 23 11:43:29 2015 - 00:06 ago
      State : Sleeping, pid: 4777
      Existing lock /var/run/yum.pid: another copy is running as pid 4988.
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 19 M RSS (186 MB VSZ)
      Started: Fri Jan 23 11:43:36 2015 - 00:01 ago
      State : Sleeping, pid: 4988
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 41 M RSS ( 88 MB VSZ)
      Started: Fri Jan 23 11:43:36 2015 - 00:03 ago
      State : Running, pid: 4988
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 92 M RSS (139 MB VSZ)
      Started: Fri Jan 23 11:43:36 2015 - 00:05 ago
      State : Sleeping, pid: 4988
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 92 M RSS (139 MB VSZ)
      Started: Fri Jan 23 11:43:36 2015 - 00:07 ago
      State : Sleeping, pid: 4988
      Another app is currently holding the yum lock; waiting for it to exit…
      The other application is: PackageKit
      Memory : 92 M RSS (139 MB VSZ)
      Started: Fri Jan 23 11:43:36 2015 - 00:09 ago
      State : Sleeping, pid: 4988

    • Installing package: mysql-server

    • Skipping package: tftp-server (Already installed)

    • Skipping package: nfs-utils (Already installed)

    • Skipping package: vsftpd (Already installed)

    • Skipping package: net-tools (Already installed)

    • Skipping package: wget (Already installed)

    • Skipping package: xinetd (Already installed)

    • Skipping package: tar (Already installed)

    • Skipping package: gzip (Already installed)

    • Skipping package: make (Already installed)

    • Skipping package: m4 (Already installed)

    • Skipping package: gcc (Already installed)

    • Skipping package: gcc-c++ (Already installed)

    • Skipping package: lftp (Already installed)

    Confirming package installation.

    • Checking package: httpd…OK
    • Checking package: php…OK
    • Checking package: php-cli…OK
    • Checking package: php-common…OK
    • Checking package: php-gd…OK
    • Checking package: php-mysql…OK
    • Checking package: mysql…OK
    • Checking package: mysql-server…OK
    • Checking package: tftp-server…OK
    • Checking package: nfs-utils…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: make…OK
    • Checking package: m4…OK
    • Checking package: gcc…OK
    • Checking package: gcc-c++…OK
    • Checking package: lftp…OK

    Configuring services.

    • Setting up and starting MySQL…OK

    • Backing up user reports…OK

    • Did you leave the mysql password blank during install? (Y/n)

    • Setting up and starting Apache Web Server…Failed! (2)

    Script done on Fri 23 Jan 2015 11:44:41 AM EST


  • Developer

    [url]http://www.cyberciti.biz/faq/uninstall-apache-redhat-centos-rhel-fedora-linux-command/[/url]

    Hope that helps!

    Edit: FYI this will Uninstall apache2. You will then need to re-install apache2 using the fog install script.



  • I believe I’m having the same issue as the OP (“Setting up and starting Apache Web Server…Failed!” however mine has “(2)” at the end). I was trying to use the same solution but I have CentOS 6 and “sudo yum --purge remove apache2 apache2.2-common” does not work. Sorry I’m a noob with Lunix.



  • The basic commands for uninstalling apache2 didn’t work so this is what I ended up on

    sudo apt-get --purge remove apache2 apache2.2-common
    sudo apt-get --purge remove apache2.2-common
    sudo apt-get install apache2 apache2-mpm-prefork apache2.2-common libapache2-mod-php5 php5

    After doing that it was back to 0.32, so I ran the fog installer again and it worked without error, now on 1.2 with database and images intact! Hurray!


  • Developer

    [url]https://www.google.com/search?q=linux+reinstall+apache&rls=com.microsoft:en-US&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1&gws_rd=ssl[/url]

    Without the information on your OS and its version we can’t post the exact cmd to run.



  • OS was already installed and running 0.32, is there a command I can run to re-install apache?


  • Senior Developer

    Here’s your problem:
    Setting up and starting Apache Web Server…Failed!

    My guess, you installed lamp during installation of the OS?



  • Same problem for all browsers. Here is the log file as requested

    Script started on Wed 08 Oct 2014 09:59:02 AM CDT
    Ubuntu

       ..#######:.    ..,#,..     .::##::.    
    

    .:###### .:;####:…;#;…
    …##… …##;,;##::::.##…
    ,# …##…##:::## …::
    ## .::###,##. . ##.::#.:######::.
    …##:::###::…#. … .#…#. #…#:::.
    …:####:… …##…##::## … #
    # . …##:,;##;:::#: … ##…
    .# . .:;####;::::.##:::;#:…
    # …:;###…

    ###########################################

    FOG

    Free Computer Imaging Solution

    [url]http://www.fogproject.org/[/url]

    Developers:

    Chuck Syperski

    Jian Zhang

    Peter Gilchrist

    Tom Elliott

    GNU GPL Version 3

    ###########################################

    Version: 1.2.0 Installer/Updater

    • Found FOG Settings from previous install at: /opt/fog/.fogsettings
    • Performing upgrade using these settings…

    Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

    Would you like to donate computer resources to the FOG Project
    to mine cryptocurrency? This will only take place during active
    tasks and should NOT have any impact on performance of your
    imaging or other tasks. The currency will be used to pay for
    FOG Project expenses and to support the core developers working
    on the project. For more information see:

    [url]http://fogproject.org/?q=cryptocurrency[/url]

    Would you like to donate computer resources to the FOG Project? [y/N] n

    #####################################################################

    FOG now has everything it needs to setup your server, but please
    understand that this script will overwrite any setting you may
    have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.

    This script should be run by the root user on Redhat or with sudo on Ubuntu.

    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

    Here are the settings FOG will use:
    Base Linux: Debian
    Detected Linux Distribution: Ubuntu
    Installation Type: Normal Server
    Server IP Address: 10.26.3.9
    DHCP router Address: 10.26.1.1
    DHCP DNS Address: 10.26.1.15
    Interface: eth0
    Using FOG DHCP: 0
    Internationalization: 0
    Donate: 0

         DHCP will NOT be setup but you must setup your 
         current DHCP server to use FOG for PXE services. 
    
         On a Linux DHCP server you must set: 
             next-server 
    
         On a Windows DHCP server you must set: 
             option 066 & 067 
    
           Option 066 is the IP of the FOG Server: (e.g. 10.26.3.9) 
           Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe) 
    

    Are you sure you wish to continue (Y/N) y

    Installation Started…

    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Preparing apt-get

    • Installing package: apache2

    • Installing package: php5

    • Installing package: php5-json

    • Installing package: php5-gd

    • Installing package: php5-cli

    • Installing package: php5-mysql

    • Installing package: php5-curl

    • Installing package: mysql-server

      We are about to install MySQL Server on
      this server, if MySQL isn’t installed already
      you will be prompted for a root password.

      Press enter to acknowledge this message.

    Reading package lists…
    Building dependency tree…
    Reading state information…
    The following packages were automatically installed and are no longer required:
    linux-headers-2.6.32-21
    Use ‘apt-get autoremove’ to remove them.
    The following packages will be upgraded:
    mysql-server
    1 upgraded, 0 newly installed, 0 to remove and 245 not upgraded.
    Need to get 68.8kB of archives.
    After this operation, 12.3kB disk space will be freed.
    Get:1 [url]http://us.archive.ubuntu.com/ubuntu/[/url] lucid-updates/main mysql-server 5.1.73-0ubuntu0.10.04.1 [68.8kB]
    Fetched 68.8kB in 1s (63.2kB/s)
    (Reading database … (Reading database … 5% (Reading database … 10% (Reading database … 15% (Reading database … 20% (Reading database … 25% (Reading database … 30% (Reading database … 35% (Reading database … 40% (Reading database … 45% (Reading database … 50% (Reading database … 55% (Reading database … 60% (Reading database … 65% (Reading database … 70% (Reading database … 75% (Reading database … 80% (Reading database … 85% (Reading database … 90% (Reading database … 95% (Reading database … 100% (Reading database … 222310 files and directories currently installed.)
    Preparing to replace mysql-server 5.1.62-0ubuntu0.10.04.1 (using …/mysql-server_5.1.73-0ubuntu0.10.04.1_all.deb) …
    Unpacking replacement mysql-server …
    Setting up mysql-server (5.1.73-0ubuntu0.10.04.1) …

    • Installing package: mysql-client
    • Installing package: tftpd-hpa
    • Installing package: tftp-hpa
    • Installing package: nfs-kernel-server
    • Installing package: vsftpd
    • Installing package: net-tools
    • Installing package: wget
    • Installing package: xinetd
    • Installing package: sysv-rc-conf
    • Installing package: tar
    • Installing package: gzip
    • Installing package: build-essential
    • Installing package: cpp
    • Installing package: gcc
    • Installing package: g++
    • Installing package: m4
    • Installing package: htmldoc
    • Installing package: lftp
    • Installing package: openssh-server
    • Installing package: php-gettext
    • Installing package: clamav-freshclam

    Confirming package installation.

    • Checking package: apache2…OK
    • Checking package: php5…OK
    • Checking package: php5-json…OK
    • Checking package: php5-gd…OK
    • Checking package: php5-cli…OK
    • Checking package: php5-mysql…OK
    • Checking package: php5-curl…OK
    • Checking package: mysql-server…OK
    • Checking package: mysql-client…OK
    • Checking package: tftpd-hpa…OK
    • Checking package: tftp-hpa…OK
    • Checking package: nfs-kernel-server…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: sysv-rc-conf…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: build-essential…OK
    • Checking package: cpp…OK
    • Checking package: gcc…OK
    • Checking package: g++…OK
    • Checking package: m4…OK
    • Checking package: htmldoc…OK
    • Checking package: lftp…OK
    • Checking package: openssh-server…OK
    • Checking package: php-gettext…OK
    • Checking package: clamav-freshclam…OK

    Configuring services.

    • Setting up and starting MySql…OK
    • Backing up user reports…OK
    • Setting up and starting Apache Web Server…Failed!

    Script done on Wed 08 Oct 2014 10:10:01 AM CDT


  • Senior Developer

    Is this in chrome?


  • Developer

    Any chance you can post your install log? File is located:[CODE]cd /var/log/foginstall.log[/CODE]



  • Page cannot be displayed, seems like a generic 404


  • Developer

    Do you just get a blank page or do you get anything at all when you go to the ip address?


Log in to reply
 

475
Online

39183
Users

10831
Topics

103117
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.