Wake-Up task



  • Hello All,

    i have just updated to Fog 1.1.1 and when created an Schedule Instant Deployment for a workstation i am presented with a blank page and the unit does not wake up.

    is anyone else having this problem?

    p.s. when running manual script to the same MAC the unit wake up



  • sorted thank you


  • Senior Developer

    can you try again? Svn update, etc…



  • At revision 1838.
    …/lib/ubuntu/functions.sh: line 309: [: : unary operator expected


  • Senior Developer

    Just go into the folder and run[code]svn update[/code]
    and cd bin and rerun installer.


  • Senior Developer

    Okay,

    I should have a “cleaned” version of the install scripts now. One where it won’t throw unary operator errors.



  • Script started on Sat 14 Jun 2014 16:19:54 BST
    Ubuntu
    …#######:. …,#,… .::##::.
    .:###### .:;####:…;#;…
    …##… …##;,;##::::.##…
    ,# …##…##:::## …::
    ## .::###,##. . ##.::#.:######::.
    …##:::###::…#. … .#…#. #…#:::.
    …:####:… …##…##::## … #
    # . …##:,;##;:::#: … ##…
    .# . .:;####;::::.##:::;#:…
    # …:;###…
    ###########################################

    FOG

    Free Computer Imaging Solution

    [url]http://www.fogproject.org/[/url]

    Developers:

    Chuck Syperski

    Jian Zhang

    Peter Gilchrist

    Tom Elliott

    GNU GPL Version 3

    ###########################################
    Version: 1.1.1 Installer/Updater

    • Found FOG Settings from previous install at: /opt/fog/.fogsettings
    • Performing upgrade using these settings…
      Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.
      #####################################################################
      FOG now has everything it needs to setup your server, but please
      understand that this script will overwrite any setting you may
      have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.
    This script should be run by the root user on Redhat or with sudo on Ubuntu.
    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]
    Here are the settings FOG will use:
    Base Linux: Debian
    Detected Linux Distribution: Ubuntu
    Installation Type: Normal Server
    Server IP Address: 172.18.130.197
    DHCP router Address:
    DHCP DNS Address:
    Interface: eth0
    Using FOG DHCP: 0
    Internationalization: 0
    Donate: 0
    DHCP will NOT be setup but you must setup your
    current DHCP server to use FOG for PXE services.
    On a Linux DHCP server you must set:
    next-server
    On a Windows DHCP server you must set:
    option 066 & 067
    Option 066 is the IP of the FOG Server: (e.g. 172.18.130.197
    Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)
    Are you sure you wish to continue (Y/N) y
    Installation Started…
    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Preparing apt-get
    • Installing package: apache2
    • Installing package: php5
    • Installing package: php5-json
    • Installing package: php5-gd
    • Installing package: php5-cli
    • Installing package: php5-mysql
    • Installing package: php5-curl
    • Installing package: mysql-server
      We are about to install MySQL Server on
      this server, if MySQL isn’t installed already
      you will be prompted for a root password.
      Press enter to acknowledge this message.
      Reading package lists…
      Building dependency tree…
      Reading state information…
      mysql-server is already the newest version.
      The following packages were automatically installed and are no longer required:
      linux-headers-2.6.32-38 libtommath0 linux-headers-2.6.32-38-server
      Use ‘apt-get autoremove’ to remove them.
      0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    • Installing package: mysql-client
    • Installing package: tftpd-hpa
    • Installing package: tftp-hpa
    • Installing package: nfs-kernel-server
    • Installing package: vsftpd
    • Installing package: net-tools
    • Installing package: wget
    • Installing package: xinetd
    • Installing package: sysv-rc-conf
    • Installing package: tar
    • Installing package: gzip
    • Installing package: build-essential
    • Installing package: cpp
    • Installing package: gcc
    • Installing package: g++
    • Installing package: m4
    • Installing package: htmldoc
    • Installing package: lftp
    • Installing package: openssh-server
    • Installing package: php-gettext
    • Installing package: clamav-freshclam
      Confirming package installation.
    • Checking package: apache2…OK
    • Checking package: php5…OK
    • Checking package: php5-json…OK
    • Checking package: php5-gd…OK
    • Checking package: php5-cli…OK
    • Checking package: php5-mysql…OK
    • Checking package: php5-curl…OK
    • Checking package: mysql-server…OK
    • Checking package: mysql-client…OK
    • Checking package: tftpd-hpa…OK
    • Checking package: tftp-hpa…OK
    • Checking package: nfs-kernel-server…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: sysv-rc-conf…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: build-essential…OK
    • Checking package: cpp…OK
    • Checking package: gcc…OK
    • Checking package: g++…OK
    • Checking package: m4…OK
    • Checking package: htmldoc…OK
    • Checking package: lftp…OK
    • Checking package: openssh-server…OK
    • Checking package: php-gettext…OK
    • Checking package: clamav-freshclam…OK
      Configuring services.
    • Setting up fog user…Exists
    • Setting up and starting MySql…OK
    • Backing up user reports…OK
    • Did you leave the mysql password blank during install? (Y/n) n
    • Please enter your mysql password:
    • Please re-enter your mysql password:
      …/lib/ubuntu/functions.sh: line 330: [: !=: unary operator expected
    • Setting up and starting Apache Web Server…OK
    • Configuring Fresh Clam…OK
    • Setting up storage…OK
    • Setting up and starting NFS Server…OK
    • Setting up and starting DHCP Server…Skipped
    • Setting up and starting TFTP and PXE Servers…OK
    • Setting up and starting VSFTP Server…OK
    • Setting up sudo settings…OK
    • Setting up FOG Snapins…OK
    • Setting up and building UDPCast…OK
    • Installing init scripts…OK
    • Setting up FOG Services…OK
    • Starting FOG Multicast Management Server…OK
    • Starting FOG Image Replicator Server…OK
    • Starting FOG Task Scheduler Server…OK
    • Setting up FOG Utils…OK
      Would you like to notify the FOG group about this installation?
      • This information is only used to help the FOG group determine
        if FOG is being used. This information helps to let us know
        if we should keep improving this product.
        Send notification? (Y/N)n
        NOT sending notification.
        Setup complete!
        You can now login to the FOG Management Portal using
        the information listed below. The login information
        is only if this is the first install.
        This can be done by opening a web browser and going to:
        [url]http://172.18.130.197/fog/management[/url]
        Default User:
        Username: fog
        Password: password
        Script done on Sat 14 Jun 2014 16:21:25 BST


  • when installing SVN

    • Please enter your mysql password:
    • Please re-enter your mysql password:
      …/lib/ubuntu/functions.sh: line 330: [: !=: unary operator expected

  • Senior Developer

    That, I don’t know much about, if you want you can try posting a few snippets of them here. It sounds like it’s not reading the config.php file properly though and for that I don’t have a simple answer for trouble shooting.

    I suppose, you could try changing the DATABASE_HOST from localhost to the IP of the fog server. I’m thinking the “upgrade” process is breaking it at the moment. I was playing with the installer files yesterday evening and found a more approachable method to system updates. If you’d be willing, can you upgrade to SVN?

    [code]svn co https://svn.code.sf.net/p/freeghost/code/trunk fog_svn
    cd fog_svn/bin
    sudo ./installfog.sh[/code]

    Maybe this will help fix these issues hopefully? I know it will also fix the client updater problems. You can try the MSI updater you were trying earlier, though I don’t think that will work because the service never calls it, but it should download and return as if it wants to update.



  • its also worth mentioning that until today my apache2 error logs we 90kb to 150kb however today its 10mb


  • Senior Developer

    Just weird man, that its using a “blank” password for WOL. It’s all calling the same functions so it shouldn’t be trying to do that.

    I may have found (on a side note) the bug with the client updater, awaiting return on test client.



  • i have been running 0.32 for some time without issue, yesterday i updated to 1.1.0 and today i went to 1.1.1

    re install just done foginstall.log below (no issues that i can see)

    Script started on Sat 14 Jun 2014 15:50:24 BST

       ..#######:.    ..,#,..     .::##::.   
    

    .:###### .:;####:…;#;…
    …##… …##;,;##::::.##…
    ,# …##…##:::## …::
    ## .::###,##. . ##.::#.:######::.
    …##:::###::…#. … .#…#. #…#:::.
    …:####:… …##…##::## … #
    # . …##:,;##;:::#: … ##…
    .# . .:;####;::::.##:::;#:…
    # …:;###…

    ###########################################

    FOG

    Free Computer Imaging Solution

    [url]http://www.fogproject.org/[/url]

    Developers:

    Chuck Syperski

    Jian Zhang

    Peter Gilchrist

    Tom Elliott

    GNU GPL Version 3

    ###########################################

    Version: 1.1.1 Installer/Updater

    • Found FOG Settings from previous install at: /opt/fog/.fogsettings
    • Performing upgrade using these settings…

    Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

    #####################################################################

    FOG now has everything it needs to setup your server, but please
    understand that this script will overwrite any setting you may
    have setup for services like DHCP, apache, pxe, tftp, and NFS.

    It is not recommended that you install this on a production system
    as this script modifies many of your system settings.

    This script should be run by the root user on Redhat or with sudo on Ubuntu.

    ** Notice ** Redhat users will need to disable SELinux and iptables in
    order to use FOG
    Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

    Here are the settings FOG will use:
    Base Linux: Debian
    Detected Linux Distribution: Ubuntu
    Installation Type: Normal Server
    Server IP Address: 172.18.130.197
    DHCP router Address:
    DHCP DNS Address:
    Interface: eth0
    Using FOG DHCP: 0
    Internationalization: 0
    Donate: 0

         DHCP will NOT be setup but you must setup your
         current DHCP server to use FOG for PXE services.
    
         On a Linux DHCP server you must set:
             next-server
    
         On a Windows DHCP server you must set:
             option 066 & 067
    

    Option 066 is the IP of the FOG Server: (e.g. 172.18.130.197
    Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

    Are you sure you wish to continue (Y/N) y

    Installation Started…

    Installing required packages, if this fails
    make sure you have an active internet connection.

    • Preparing apt-get

    • Installing package: apache2

    • Installing package: php5

    • Installing package: php5-json

    • Installing package: php5-gd

    • Installing package: php5-cli

    • Installing package: php5-mysql

    • Installing package: php5-curl

    • Installing package: mysql-server

      We are about to install MySQL Server on
      this server, if MySQL isn’t installed already
      you will be prompted for a root password.

      Press enter to acknowledge this message.

    Reading package lists…
    Building dependency tree…
    Reading state information…
    mysql-server is already the newest version.
    The following packages were automatically installed and are no longer required:
    linux-headers-2.6.32-38 libtommath0 linux-headers-2.6.32-38-server
    Use ‘apt-get autoremove’ to remove them.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

    • Installing package: mysql-client
    • Installing package: tftpd-hpa
    • Installing package: tftp-hpa
    • Installing package: nfs-kernel-server
    • Installing package: vsftpd
    • Installing package: net-tools
    • Installing package: wget
    • Installing package: xinetd
    • Installing package: sysv-rc-conf
    • Installing package: tar
    • Installing package: gzip
    • Installing package: build-essential
    • Installing package: cpp
    • Installing package: gcc
    • Installing package: g++
    • Installing package: m4
    • Installing package: htmldoc
    • Installing package: lftp
    • Installing package: openssh-server
    • Installing package: php-gettext
    • Installing package: clamav-freshclam

    Confirming package installation.

    • Checking package: apache2…OK
    • Checking package: php5…OK
    • Checking package: php5-json…OK
    • Checking package: php5-gd…OK
    • Checking package: php5-cli…OK
    • Checking package: php5-mysql…OK
    • Checking package: php5-curl…OK
    • Checking package: mysql-server…OK
    • Checking package: mysql-client…OK
    • Checking package: tftpd-hpa…OK
    • Checking package: tftp-hpa…OK
    • Checking package: nfs-kernel-server…OK
    • Checking package: vsftpd…OK
    • Checking package: net-tools…OK
    • Checking package: wget…OK
    • Checking package: xinetd…OK
    • Checking package: sysv-rc-conf…OK
    • Checking package: tar…OK
    • Checking package: gzip…OK
    • Checking package: build-essential…OK
    • Checking package: cpp…OK
    • Checking package: gcc…OK
    • Checking package: g++…OK
    • Checking package: m4…OK
    • Checking package: htmldoc…OK
    • Checking package: lftp…OK
    • Checking package: openssh-server…OK
    • Checking package: php-gettext…OK
    • Checking package: clamav-freshclam…OK

    Configuring services.

    • Setting up fog user…Exists

    • Setting up and starting MySql…OK

    • Backing up user reports…OK

    • Did you leave the mysql password blank during install? (Y/n) n

    • Please enter your mysql password:

    • Please re-enter your mysql password:

    • Setting up and starting Apache Web Server…OK
      You still need to install/update your database schema.
      This can be done by opening a web browser and going to:

      [url]http://172.18.130.197/fog/management[/url]

    Press [Enter] key when database is updated/installed.

    • Configuring Fresh Clam…OK
    • Setting up storage…OK
    • Setting up and starting NFS Server…OK
    • Setting up and starting DHCP Server…Skipped
    • Setting up and starting TFTP and PXE Servers…OK
    • Setting up and starting VSFTP Server…OK
    • Setting up sudo settings…OK
    • Setting up FOG Snapins…OK
    • Setting up and building UDPCast…OK
    • Installing init scripts…OK
    • Setting up FOG Services…OK
    • Starting FOG Multicast Management Server…OK
    • Starting FOG Image Replicator Server…OK
    • Starting FOG Task Scheduler Server…OK
    • Setting up FOG Utils…OK

    Would you like to notify the FOG group about this installation?
    * This information is only used to help the FOG group determine
    if FOG is being used. This information helps to let us know
    if we should keep improving this product.

    Send notification? (Y/N)n
    NOT sending notification.

    Setup complete!

    You can now login to the FOG Management Portal using
    the information listed below. The login information
    is only if this is the first install.

    This can be done by opening a web browser and going to:

      [url]http://172.18.130.197/fog/management[/url]
    
      Default User:
             Username: fog
             Password: password
    

    Script done on Sat 14 Jun 2014 15:52:57 BST


  • Senior Developer

    Can you try rerunning the installer? Was there any problems before?

    I ask because it’s just strange that it’s trying to use no password when it’s clearly defined. Maybe the php-mysql module isn’t installed?



  • fog server



  • this is line 64 from /var/www/fog/lib/db/MySQL.class.php

    if (!$this->link = new mysqli($this->host, $this->user, $this->pass))


  • Senior Developer

    Is this on the actual FOG Server or the node?



  • i have 122 entries of below in today’s Apache log. why is it using password: NO?

    [Sat Jun 14 09:45:18 2014] [error] [client 172.18.129.59] PHP Warning: mysqli::mysqli(): (28000/1045): Access denied for user ‘root’@‘localhost’ (using password: NO) in /var/www/fog/lib/db/MySQL.class.php on line 64



  • in config .php

    define(‘DATABASE_PASSWORD’,‘Mypassword’);

    is set


  • Senior Developer

    From what I’m seeing in your information, your /var/www/fog/commons/config.php does not have a password set for the sql user. However, you most likely have one set for the database which could be the problem being encountered. How you were able to get to the screen in the first place is a little strange to me though. It shouldn’t have allowed you to access the FOG GUI at all, at the most redirecting to the schema updater page.



  • maybe not the password is in /var/www/fog/commons config.php


Log in to reply
 

531
Online

39008
Users

10721
Topics

101841
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.