My FOG 1.1.0 broken - Please help

Achieve94

I’ve restarted the database; still not working.

Just in case, I’ve now set a password to MySQL during re-install - which I previously left blank. Is there any way I can make FOG use this new password?

Thanks.

Tom Elliott

Edit the /var/www/fog/commons/config.php and set the PASSWORD in db_settings.

Achieve94

Just checked, the password has already being set there by the installer but can’t perform the schema upgrade via the web UI still.

Thanks.

Tom Elliott

so in your /var/www/fog/commons/config.php file, the password is already set? Is the host set correctly as well?

Achieve94

Yes the password was set by the installer after I ran the re-install. The host is set as ‘localhost’.

Thanks.

Tom Elliott

I’m going to guess, then that everything is correct and you could actually login to the mysql instance. What happens if you change localhost to the actual FOG Server’s IP address?

Achieve94

I’ve changed the ‘localhost’ to the server’s IP address and restarted MySQL but still didn’t resolve the issue.

Is there a way I can test MySQL login via Terminal to see if it prompts me for the credentials?

Thanks.

Tom Elliott

[code]mysql -u root fog[/code]

Does it let you into the database?

Achieve94

Typed that in and it took me straight to MySQL> prompt. There was no prompt for credentials.

Thanks.

Tom Elliott

So remove the password from the db_settings field.

Achieve94

Yes.

Achieve94

Password removed.

Thanks.

Tom Elliott

Are things working now?

Achieve94

No I’m afraid, still not working.
Seems a strange problem.

Achieve94

This is the prompt I got with or without MySQL password in Config.php when I typed “MySQL -u root fog” command at the Terminal…

[url=“/_imported_xf_attachments/0/996_FOG2.jpg?:”]FOG2.jpg[/url]

Achieve94

And this is the issue as reported in web UI…

[url=“/_imported_xf_attachments/0/997_FOGISSUE.jpg?:”]FOGISSUE.jpg[/url]

Tom Elliott

What that means is you don’t have a root password set for mysql.
If you had a password set to the mysql server and typed in the mysql -u root fog, the terminal would’ve spit out:
[code]ERROR 1045 (28000): Access denied for user ‘root’@‘localhost’ (using password: NO)[/code]

Mysql doesn’t run because of the /var/www/fog/commons/config.php file. It runs on it’s own.

You can set a password for mysql but I would recommend against it. When the installer is asking you if you left the mysql password blank either hit enter your type Y and press enter.

Achieve94

OK, I can re-run the installer again; then this time leaving MySQL password blank.

Thanks

Achieve94

Hello,

I’ve now ran the installer again this time leaving the MySQL password blank. However, I can’t still login to the FOG web UI with the default login “fog” and “password” that I’ve always used.

This is happening when I try to login to the web UI on the FOG server itself and from a client PC.

Any ideas?

Thanks.

Achieve94

An update:

I’ve just had a look at my /var/log/apache2/error.log after trying to login to the web UI unsuccessfully; the error log says:

[COLOR=#ff0000][Mon Jun 16 08:34:19 2014] [error] [client 200.168.212.226] PHP Fatal error: Call to a member function mainMenu() on a non-object in /var/www/fog/management/index.php on line 70, referer:[URL=‘http://<ip_address>/fog/management/?node=login’][COLOR=#ff0000]http://200.168.212.226/fog/management/?node=login[/COLOR][/URL][/COLOR]

And below is a copy of my install.log from /var/log/foginstall.log:

Script started on Mon 16 Jun 2014 07:53:39 BST

   ..#######:.    ..,#,..     .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…
###########################################

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################
Version: 1.1.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings
Performing upgrade using these settings…
Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

#####################################################################
FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.
This script should be run by the root user on Redhat or with sudo on Ubuntu.
** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 200.168.212.226
DHCP router Address: 200.168.212.220
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 1
Internationalization: 0
Donate: 0

Are you sure you wish to continue (Y/N) y
Installation Started…
Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server
We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.
Press enter to acknowledge this message.
Reading package lists…
Building dependency tree…
Reading state information…
mysql-server is already the newest version.
The following packages were automatically installed and are no longer required:
libtommath0
Use ‘apt-get autoremove’ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Installing package: mysql-client
Installing package: isc-dhcp-server
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam
Confirming package installation.
Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: isc-dhcp-server…Failed!
Checking for legacy package: dhcp3-serverOK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK
Configuring services.
Setting up fog user…Exists
Setting up and starting MySql…OK
Backing up user reports…OK
Did you leave the mysql password blank during install? (Y/n) Y
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:
[url]http://200.168.212.226/fog/management[/url]
Press [Enter] key when database is updated/installed.
Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…OK
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.
Send notification? (Y/N)N
NOT sending notification.

Setup complete!
You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.
This can be done by opening a web browser and going to:
[url]http://200.168.212.226/fog/management[/url]
Default User:
Username: fog
Password: password

Script done on Mon 16 Jun 2014 08:06:43 BST

Just in case, I’m running Ubuntu 10.04 OS.

Any ideas?

My FOG 1.1.0 broken - Please help

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

132

12.1k

17.3k

155.3k