Can't get a HP machine to work upload or download an image.
-
I am at the prompt screen.
-
cool run,
[code]gdisk -l /dev/sda[/code]
What’s the output?
-
Found valid MBR and GPT. Which do you want to see?
1 - MBR
2 - GPT
3 - Create blank GPT -
What?
I want to see the output it shouldn’t be asking you any thing.
-
I have attached a new picture of what is on the screen.
[url=“/_imported_xf_attachments/0/891_20140604_102535_resized.jpg?:”]20140604_102535_resized.jpg[/url]
-
Is that a -l or -1 or -i?
(dash ell is what it should be, lowercase) -
I ran it again. I made the mistake of typing gdisk -l /dev/sda/. I retyped it as gdisk -1 /dev/sda and got:
GPT fdisk (gdisk) version 0.8.6
Usage: gdisk [-l] device_file
-
[quote=“Tom Elliott, post: 29168, member: 7271”][code]gdisk -l /dev/sda[/code]
What’s the output?[/quote]Not hijacking but I have the same issues on two of my HP models. 4000 Pro and 6000 Pro desktops. Below are screen shots of what I’m seeing and getting. Out put from the above command is in the last shot.
[ATTACH=full]899[/ATTACH][ATTACH=full]900[/ATTACH][ATTACH=full]901[/ATTACH][ATTACH=full]902[/ATTACH]
[url=“/_imported_xf_attachments/0/899_Fig1 (800x600).jpg?:”]Fig1 (800x600).jpg[/url][url=“/_imported_xf_attachments/0/900_Fig2 (800x600).jpg?:”]Fig2 (800x600).jpg[/url][url=“/_imported_xf_attachments/0/901_Fig3 (800x600).jpg?:”]Fig3 (800x600).jpg[/url][url=“/_imported_xf_attachments/0/902_Fig4 (800x600).jpg?:”]Fig4 (800x600).jpg[/url]
-
Scott your issue looks to be the first partition does not have the boot flag set on it
-
Then again I could be wrong Scott for you can you do and FDISK – L
-
[quote=“Tom Elliott, post: 29220, member: 7271”]Scott your issue looks to be the first partition does not have the boot flag set on it[/quote]
How does that get set? That was for the 6000.
-
Did the last post I gave give what you wanted tom? OR did I not type it right again?
-
I tired upgrading to the new version of the fog. I am now at version 1.1.0. I am still having the same issue. Does any one have any suggestions?