Network fails on compatibility test
-
#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
params
param mac ${net0/mac}
param arch ${arch}
chain [url]http://172.16.0.35/fog/service/ipxe/boot.php##params[/url] -
Okay, as the video is kind of grainy please bare with me.
What is the value stored in FOG_PXE_BOOT_IMAGE from FOG Configuration->FOG Settings->TFTP Server
-
The value for FOG_PXE_BOOT_IMAGE is init
-
Set it to init.xz
-
Well, I’m back to square one now. The drives have been put in legacy mode, the kernel has been updated, and fog has been updated, but it still says it can’t register the host.
-
Have you tried my 3.10.one kernel
-
[LEFT]What I have now (sorry for the background music):[/LEFT]
[LEFT][media=youtube]OZcLLcZwDMI[/media][/LEFT] -
Looks like it’s still not detecting the nic properly I’ll try and build an older kernel when I get home
-
[quote=“Tom Elliott, post: 29906, member: 7271”]I’ll try and build an older kernel when I get home[/quote]
You’re a God among men, Mr. Elliott. Thank you kindly.
-
[quote=“Jordon Rapp, post: 29907, member: 24302”]You’re a God among men, Mr. Elliott. Thank you kindly.[/quote]
I’m no god. As a matter of fact, read this post: [url]http://fogproject.org/forum/threads/fog-community.6944/#post-16616[/url]
I think you’ll fully understand that I am still a human.
At any rate. Kernel.3.0.1.64 has been built and is available on the Unofficial Kernel’s page. If this get’s enough attention, I’ll post it to the Sourceforge site to make it “official”, after building the 32bit equivalent.
-
Thank you for all your help. Unfortunately, our 780s are 32 bit, so this does me no good ATM.
-
780’s are 32 bit?
When they load they’re loading the bzImage32 and init_32.xz?
-
Well they should be, they are 32 bit processors. But it does look as though they are loading init.xz
edit: and bzImage, but the OS shows that it is 32 bit.
-
This post is deleted! -
[quote=“Jordon Rapp, post: 30045, member: 24302”]Well they should be, they are 32 bit processors. But it does look as though they are loading init.xz
edit: and bzImage, but the OS shows that it is 32 bit.[/quote]
The OS being 32 bit doesn’t mean the System is 32 bit. You can install 32 bit OS’s on 64 bit systems. You CANNOT install 64 bit OS’s on 32 bit systems.
My guess is your systems have 64 bit capable processors. This makes sense since nearly all processors are 64 bit now-a-days. There are a few exceptions with netbooks and maybe some extremely cheap laptop’s.
-
Oh yes, how foolish of me. It is in-fact a 64 bit processor from Intel. Let me give this a try.
-
It works. Holy Sh*t (can I swear on this forum?) it works. You are a saint Tom, I don’t care what your bio says.
-
Jordan, I’m going to try something to allow for more modern drivers and packages
But still have functionality of the e1000e drivers.
Do you mind testing for me?
I’m basically going to steal the drivers from the e1000e directory of 3.0.1 kernel and plunk them into my 3.15.0 kernel. Will you be willing?
I’m not deleting the old kernel’s so stuff will still be good okay?
-
Anything. I am very willing to help out.
-
OK, one last thing. I added the host to fog, and when I went into management, it was blank. I can’t add anything, it says “No user history data found.”
