WOL and Task doesn't work

[theleftfoot]

thanks guys, will checked right now!

raffa

[theleftfoot]

okay, try the testwol.php script…but the notebook still sleeps!

i made a arp-scan on eth1 and the mac adress is not visible, because the node sleeps and is not on.

the fog wol stettings are attached and the network schema…
[ATTACH]804[/ATTACH][ATTACH]805[/ATTACH]

it might be due to the 2 network interface card? miss configuration?

damm…raffa

[url=“/_imported_xf_attachments/0/804_wol_settings.jpg?:”]wol_settings.jpg[/url][url=“/_imported_xf_attachments/0/805_ict_labor_FOG_image.jpg?:”]ict_labor_FOG_image.jpg[/url]

[Raff]

Change Settings FOG_WOL_INTERFACE to eth1.

[theleftfoot]

raff, like the pic above show --> it is on eth1

raffa

[Raff]

Your pic just tells us that your using connection eth1, not that you have configured fog to use eth1 for WOL in the fog settings.

check /var/www/fog/commons/config.php or use the console

define(‘WOL_HOST’, “1.1.1.1”);
define(‘WOL_PATH’, ‘/fog/wol/wol.php’);
define(‘WOL_INTERFACE’, “eth0”);

[theleftfoot]

ahh, sorry mate…seems okay!

[CODE]define(‘TFTP_HOST’, “192.168.1.1”);
define(‘TFTP_FTP_USERNAME’, “fog”);
define(‘TFTP_FTP_PASSWORD’, “daa6c4”);
define(‘TFTP_PXE_KERNEL_DIR’, ‘/var/www/fog/service/ipxe/’);
define(‘PXE_KERNEL’, ‘bzImage’);
define(‘PXE_KERNEL_RAMDISK’,127000);
define(‘USE_SLOPPY_NAME_LOOKUPS’,true);
define(‘MEMTEST_KERNEL’, ‘memtest.bin’);
define(‘PXE_IMAGE’, ‘init.xz’);
define(‘PXE_IMAGE_DNSADDRESS’, “8.8.8.8”);
define(‘STORAGE_HOST’, “192.168.1.1”);
define(‘STORAGE_FTP_USERNAME’, “fog”);
define(‘STORAGE_FTP_PASSWORD’, “daa6c4”);
define(‘STORAGE_DATADIR’, ‘/images/’);
define(‘STORAGE_DATADIR_UPLOAD’, ‘/images/dev/’);
define(‘STORAGE_BANDWIDTHPATH’, ‘/fog/status/bandwidth.php’);
define(‘UPLOADRESIZEPCT’,5);
define(‘WEB_HOST’, “192.168.1.1”);
define(‘WOL_HOST’, “192.168.1.1”);
define(‘WOL_PATH’, ‘/fog/wol/wol.php’);
define(‘WOL_INTERFACE’, “eth1”);
define(‘SNAPINDIR’, “/opt/fog/snapins/”);
define(‘QUEUESIZE’, ‘10’);
define(‘CHECKIN_TIMEOUT’,600);
define(‘USER_MINPASSLENGTH’,4);
define(‘USER_VALIDPASSCHARS’, ‘1234567890ABCDEFGHIJKLMNOPQRSTUVWZXYabcdefghijklm nopqrstuvwxyz_()^!#-’);
define(‘NFS_ETH_MONITOR’, “eth1”);
define(‘UDPCAST_INTERFACE’, “eth1”);
define(‘UDPCAST_STARTINGPORT’, 63100 ); / / Must be an even number! recommended between 49152 to 65535
define(‘FOG_MULTICAST_MAX_SESSIONS’,64);
define(‘FOG_JPGRAPH_VERSION’, ‘2.3’);
define(‘FOG_REPORT_DIR’, ‘./reports/’);
define(‘FOG_UPLOADIGNOREPAGEHIBER’,true);
define(‘FOG_DONATE_MINING’, “0”);[/CODE]

[Raff]

In your pic your fog host is 192.168.1.2 but in your configuration its 192.168.1.1, is that an error in the pic or have you changed the static IP on the server.

[theleftfoot]

the pictures is wrong…192.168.1.1 is corrcet!

[Raff]

Raffa,

The only thing I can suggest now is to try it with a server with a single card configured to use eth0.

[theleftfoot]

thanks for helping, i will try the WOL on eth0…cheers

[Raff]

I just thought of something else. Have you got 2 gateways configured on the server, on both eth0 and eth1 because that would cause an issue.

[theleftfoot]

yes, i have for each network…192.168.1.1 for the eth1 and 192.168.17.1 for the eth0

[Raff]

remove the gateway 192.168.1.1, leave it blank.

[theleftfoot]

will try…:)

[theleftfoot]

was not successfully…

my firewall settings;

[CODE]# Generated by iptables-save v1.4.12 on Fri May 23 16:14:51 2014
*mangle
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
COMMIT

Completed on Fri May 23 16:14:51 2014

Generated by iptables-save v1.4.12 on Fri May 23 16:14:51 2014

*nat
:PREROUTING ACCEPT [956:91224]
:INPUT ACCEPT [508:45734]
:OUTPUT ACCEPT [95:7272]
:POSTROUTING ACCEPT [6:604]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT

Completed on Fri May 23 16:14:51 2014

Generated by iptables-save v1.4.12 on Fri May 23 16:14:51 2014

*filter
:INPUT ACCEPT [10284:10111083]
:FORWARD ACCEPT [2027:2489014]
:OUTPUT ACCEPT [6609:1081709]
-A FORWARD -i eth1 -j ACCEPT
-A FORWARD -i eth2 -j ACCEPT
COMMIT

Completed on Fri May 23 16:14:51 2014[/CODE]

but i don’t know what eth2 is!