Latest FOG 0.33b


  • Senior Developer

    Or, are you saying deploying multicast job for multipart images is broken, I haven’t tested that part yet.


  • Senior Developer

    Figured out the RAW upload issue. It starts the upload but then promptly fails.

    I set the upload parameters properly (the part that performs the cloning) But the placement of where the files need to go during the process was all wrong. I was just telling it to write the data to the little 127MB ram disk rather than actually write it to the harddrive, to which it would promply fail and cause the system to restart. Rebuilding init.gz as we speak and will post with update.

    Next test,

    Can you be more specific with your multipartition, single disk option? Which OS? I’ve been testing with Windows 7, Windows 8, Windows 8.1, Linux, and Windows XP and haven’t had any issues. I do believe there could be an issue, but don’t know the details of your specific setup.



  • Ok, thank you!

    The other problem I’m trying to explain is with the “multipartition, single disk” option, it uploads well, but fails on deploy.


  • Senior Developer

    AH, I got you now. Looking into it as we speak.



  • On RAW fails on upload, that is what I tried to say. I don’t know if deploy works or not, because I can’t make the backup.


  • Senior Developer

    I understood that already. I just couldn’t do a raw restore test without a raw image to test with.



  • Oh, sorry, I have explained badly:
    [LIST]
    []Multipartition, single disk --> Backup seems ok. [B]Restore doesn’t work[/B].
    [
    ]Raw --> Backup doesn’t work.
    [/LIST]
    I prefer “multipartition, single disk” but I was just testing “raw” and I found that it doesn’t work too.


  • Senior Developer

    I will give it a shot joacliba, but as you’re aware, it will take a while. I have to upload a raw image, then see where it’s erroring on the restore.



  • I’m on revision 1185. Multipartition restore isn’t working, I tried RAW and it reboots when it starts to image (no error I could see). Anyone with multipartition/raw working?


  • Senior Developer

    r1186 fixes ping issues if you have FOG_HOST_LOOKUP on.


  • Senior Developer

    [quote=“ccmiens, post: 22385, member: 2951”]Hi,
    How to update r1170 -> r1185?
    Uninstall and reinstall all or simply extract files of new version
    Thanks[/quote]

    You can do this is multiple ways.

    First method, if you downloaded thru svn:

    Go into the directory where you placed fog perform the command svn update and reinstall. (It will upgrade, not perform brand new install.)

    For example: /home/user/trunk
    [code]cd ~/trunk
    svn update
    cd bin
    ./install.sh[/code]

    My tarball is updated to 1185, just download it and run the installer (again it will upgrade.)
    [code]wget --no-check-certificate https://mastacontrola.com/fog_0.33b.tar.bz2
    tar -xjf fog_0.33b.tar.bz2
    cd fog_0.33b/bin
    ./install.sh[/code]

    That should do it.


  • Senior Developer

    fabritrento,

    What is the error that is given? Are you sure it’s ext4 and not LVM?



  • uploading a disk from a pc with 3 partition i get this error:

    first partition is ntfs with windows xp
    second is eth4 with ubuntu 13.10
    third is linux-swap.

    1st and 3rd is copyed ok on fog server, but second gives a error, seems that try to copy as ntfs instead as ext4.

    this bug is urgent must be fixed



  • [quote=“Tom Elliott, post: 22384, member: 7271”]Found the issue Lee was reporting.

    r1185 released. Should PROPERLY NOW, fix group/individual taskings for multicast jobs.

    Creates new multicast task for individual host multicast deploy.

    Creates Group multicast task based on the Group->Host->image being the same.[/quote]

    today i tested multicast: don’t work.

    i have 2 group: one of 26 pc another of 16 pc.

    the pcs in second group is included also in first group.

    clicked on list all group, multicast (second green icon with 2 down-rows)

    the pc boots and starts partclone, that remain grey and wait to infinite.

    here some logs:

    administrator@fog:~/fog_0.33b/bin$ ps -ef|grep fog
    avahi 507 1 0 Jan31 ? 00:00:07 avahi-daemon: running [fog.local]
    root 30590 1 0 11:19 ? 00:00:01 /usr/bin/php -q /opt/fog/service/FOGMulticastManager/FOGMulticastManager
    root 30600 1 0 11:19 ? 00:00:00 /usr/bin/php -q /opt/fog/service/FOGImageReplicator/FOGImageReplicator
    root 30612 1 0 11:19 ? 00:00:00 /usr/bin/php -q /opt/fog/service/FOGTaskScheduler/FOGTaskScheduler
    1000 31110 26061 0 11:24 pts/1 00:00:00 grep --color=auto fog
    administrator@fog:~/fog_0.33b/bin$

    administrator@fog:/opt/fog/log$ vi multicast.log
    [02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA is new!
    [02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA image file found.
    [02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA 40 clients found.
    [02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA sending on base port: 27198
    [02-03-14 11:28:18 am] CMD: cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;
    [02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA has started.
    [02-03-14 11:28:28 am] * [02-03-14 11:28:28 am] Checking if I am the group manager.
    [02-03-14 11:28:29 am] * [02-03-14 11:28:29 am] I am the group manager.
    [02-03-14 11:28:29 am] | [02-03-14 11:28:29 am] Task (50) LAB-CA is no longer running.
    [02-03-14 11:28:29 am] | [02-03-14 11:28:29 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
    [02-03-14 11:28:39 am] * [02-03-14 11:28:39 am] Checking if I am the group manager.
    [02-03-14 11:28:40 am] * [02-03-14 11:28:40 am] I am the group manager.
    [02-03-14 11:28:40 am] | [02-03-14 11:28:40 am] Task (50) LAB-CA is no longer running.
    [02-03-14 11:28:40 am] | [02-03-14 11:28:40 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
    [02-03-14 11:28:50 am] * [02-03-14 11:28:50 am] Checking if I am the group manager.
    [02-03-14 11:28:51 am] * [02-03-14 11:28:51 am] I am the group manager.
    [02-03-14 11:28:51 am] | [02-03-14 11:28:51 am] Task (50) LAB-CA is no longer running.
    [02-03-14 11:28:51 am] | [02-03-14 11:28:51 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
    [02-03-14 11:29:01 am] * [02-03-14 11:29:01 am] Checking if I am the group manager.

    administrator@fog:/var/log/apache2$ vi error.log
    [Mon Feb 03 11:35:19 2014] [error] [client 192.168.0.30] PHP Fatal error: Call to a member function isValid() on a non-object in /var/www/fog/service/servicemodule-active.php on line 11

    I retryed deleting the 26 pc group, and restart the multicast for 16pc group:

    [02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA is new!
    [02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA image file found.
    [02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA 56 clients found.
    [02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA sending on base port: 27198
    [02-03-14 11:42:09 am] CMD: cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;
    [02-03-14 11:42:10 am] | [02-03-14 11:42:10 am] Task (50) LAB-CA has started.
    [02-03-14 11:42:20 am] * [02-03-14 11:42:20 am] Checking if I am the group manager.
    [02-03-14 11:42:21 am] * [02-03-14 11:42:21 am] I am the group manager.

    Udp-sender 20120424
    Using mcast address 232.168.0.3
    UDP sender for (stdin) at 192.168.0.3 on eth0
    Broadcasting control to 224.0.0.1
    New connection from 192.168.0.142 (#0) 00000009
    New connection from 192.168.0.43 (#1) 00000009
    New connection from 192.168.0.141 (#2) 00000009
    New connection from 192.168.0.113 (#3) 00000009
    New connection from 192.168.0.133 (#4) 00000009
    New connection from 192.168.0.117 (#5) 00000009
    New connection from 192.168.0.121 (#6) 00000009
    New connection from 192.168.0.122 (#7) 00000009
    New connection from 192.168.0.123 (#8) 00000009
    New connection from 192.168.0.137 (#9) 00000009
    New connection from 192.168.0.138 (#10) 00000009
    New connection from 192.168.0.136 (#11) 00000009
    New connection from 192.168.0.127 (#12) 00000009
    New connection from 192.168.0.118 (#13) 00000009
    New connection from 192.168.0.132 (#14) 00000009

    administrator@fog:/opt/fog/log$ ps -ef|grep udp
    root 1053 30590 0 11:42 ? 00:00:00 sh -c exec cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;

    i see that LAB-CA is used, but this group is deleted and don’t exist anymore. the group name is “test”.

    i think that there is some inconsistences into db, expect --min-receivers 16 and NOT 56 (±*/ errors?)



  • Hi,
    How to update r1170 -> r1185?
    Uninstall and reinstall all or simply extract files of new version.
    Thanks


  • Senior Developer

    Found the issue Lee was reporting.

    r1185 released. Should PROPERLY NOW, fix group/individual taskings for multicast jobs.

    Creates new multicast task for individual host multicast deploy.

    Creates Group multicast task based on the Group->Host->image being the same.



  • To answer the log question, there were no files in /opt/fog/log, and none of the /var/log files showed anything other than something about not defining a timezone. Typing /opt/fog/service/FOGMulticastManager/FOGMulticastManager did give me quite a few PHP Warnings. I don’t know what’s significant

    PHP Warning: fopen(): Filename cannot be empty in /opt/fog/service/common/functions.php on line 10
    PHP Warning: date(): It is not safe to rely on the system’s timezone settings. You are required to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone ‘UTC’ for now, but please set date.timezone to select your timezone. in /opt/fog/service/common/functions.php on line 19
    PHP Warning: fopen(/dev/tty2): failed to open stream: Permission denied in /opt/fog/service/common/functions.php on line 10
    PHP Warning: fopen(/opt/fog/log/multicast.log): failed to open stream: Permission denied in /opt/fog/service/common/functions.php on line 26
    PHP Warning: Missing argument 2 for out(), called in /opt/fog/service/common/functions.php on line 28 and defined in /opt/fog/service/common/functions.php on line 6


  • Senior Developer

    Are you talking the tasks themselves, or the udp-sender?


  • Developer

    multicast doesn’t seem to be working for me, no matter how i queue the task, tried from list all hosts using deploy, tried from group multicast, tried task management and list all group, multicast - it is creating seperate multicast tasks for each host :-S



  • [quote=“Tom Elliott, post: 22379, member: 7271”]ArchFan,

    I only ask those questions because I’m currently multicasting a job and all worked perfectly.[/quote]

    It doesn’t look like FOGMulticastManager service was running. For some reason, attempting to start, stop, or restart the service using sudo initially failed. Typing /opt/fog/service/FOGMulticastManager/FOGMulticastManager seems to have resolved the issue, and I can now start, stop, and restart the service. Multicast then works as expected


Log in to reply
 

265
Online

7.0k
Users

14.2k
Topics

134.4k
Posts