<![CDATA[Same ip, no pxe boot]]>replaced router but it has the same ip address.
i’m able to log into the fog web gui but i can’t pxe boot it just times out.
using ver .29 and ubuntu 10.10

i have tried looking every where on the web but no luck. can’t seem to find what the issue is

thanks for any info on this problem.

]]>http://forums.fogproject.org/topic/1745/same-ip-no-pxe-bootRSS for NodeSun, 10 May 2026 02:38:57 GMTWed, 17 Apr 2013 02:30:58 GMT60<![CDATA[Reply to Same ip, no pxe boot on Wed, 24 Apr 2013 15:58:54 GMT]]>Just verify your IPCOP setup is issuing the next-server and filename options. I believe option 66 and 67 are windows DHCP specific option numbers. the rest of the world uses next-server-name and filename options.

]]>http://forums.fogproject.org/post/12387http://forums.fogproject.org/post/12387Wed, 24 Apr 2013 15:58:54 GMT<![CDATA[Reply to Same ip, no pxe boot on Fri, 19 Apr 2013 15:48:03 GMT]]>You could try to install the proxydhcp with DNSmasq, my building is funky with it’s DHCP and I have problems tftpbooting without the service.

I’d definitely give it a shot if your next server is set for the DHCP to see and you still are unsuccessful in getting your fog pxeboot screen

take a look here if you are interested.

[url]http://www.fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server[/url]

]]>http://forums.fogproject.org/post/12354http://forums.fogproject.org/post/12354Fri, 19 Apr 2013 15:48:03 GMT<![CDATA[Reply to Same ip, no pxe boot on Fri, 19 Apr 2013 15:24:16 GMT]]>in DHCP do you have options 066 and 067 configured?
[url]http://www.fogproject.org/wiki/index.php/Modifying_existing_DHCP_server_to_work_with_FOG[/url]

]]>http://forums.fogproject.org/post/12353http://forums.fogproject.org/post/12353Fri, 19 Apr 2013 15:24:16 GMT<![CDATA[Reply to Same ip, no pxe boot on Thu, 18 Apr 2013 21:41:54 GMT]]>dhcp is coming from ipcop witch acts like a router.
but the thing is it all worked before i redid ipcop but i’m using the same ip. i may just end up redoing fog. i have over 400 images 😞

so it goes cable modem - ipcop - switch - then everything else. fog is plugged into the switch.

]]>http://forums.fogproject.org/post/12345http://forums.fogproject.org/post/12345Thu, 18 Apr 2013 21:41:54 GMT<![CDATA[Reply to Same ip, no pxe boot on Thu, 18 Apr 2013 20:41:30 GMT]]>You could always use another server to manage DHCP. Most environments have DHCP servers and don’t use the router for DHCP. In case you decide to go that route, this page will show you how to configure DHCP for pxe boot.
[url]http://www.fogproject.org/wiki/index.php?title=Windows_DHCP_Server[/url]
What type of router were you using and what are you using now?

]]>http://forums.fogproject.org/post/12344http://forums.fogproject.org/post/12344Thu, 18 Apr 2013 20:41:30 GMT<![CDATA[Reply to Same ip, no pxe boot on Thu, 18 Apr 2013 19:39:26 GMT]]>skylar, is your dhcp service coming from this router?

]]>http://forums.fogproject.org/post/12342http://forums.fogproject.org/post/12342Thu, 18 Apr 2013 19:39:26 GMT<![CDATA[Reply to Same ip, no pxe boot on Wed, 17 Apr 2013 20:54:43 GMT]]>ok im able to use the tftp command and is send and receives in about .2 sec.
how would i go about using wireshark to see where it gets stuck? thanks

]]>http://forums.fogproject.org/post/12323http://forums.fogproject.org/post/12323Wed, 17 Apr 2013 20:54:43 GMT<![CDATA[Reply to Same ip, no pxe boot on Wed, 17 Apr 2013 19:11:33 GMT]]>can you use commands to pull the pxelinux.0 from your server?

[code]
tftp x.x.x.x get pxelinux.0
[/code]

if you get your pxelinux.0

set up a box to wireshark and see where the file gets stuck.

]]>http://forums.fogproject.org/post/12320http://forums.fogproject.org/post/12320Wed, 17 Apr 2013 19:11:33 GMT<![CDATA[Reply to Same ip, no pxe boot on Wed, 17 Apr 2013 18:32:35 GMT]]>well what is ipcop. had to redue it and ipcop runs to switch. im using same ip address as old ipcop.

no errors pop up. tried to boot pxe and then nothing. just times out. tried on different laptop same deal. dont know where the problem is.

]]>http://forums.fogproject.org/post/12319http://forums.fogproject.org/post/12319Wed, 17 Apr 2013 18:32:35 GMT<![CDATA[Reply to Same ip, no pxe boot on Wed, 17 Apr 2013 11:16:20 GMT]]>[code]
replaced router but it has the same ip address[/code]

Routers are bad, they tend to block things. Is there a DMZ zone you can set for the ip address of your server? can you try a SWITCH and not a router?

Since the router is the only thing that has changed that is where the problem would steam would be my guess, and that is where I would start.

It would be a good idea to run Wireshark to see how much information is being passed along.

What is the error, if any, you are receiving?

]]>http://forums.fogproject.org/post/12305http://forums.fogproject.org/post/12305Wed, 17 Apr 2013 11:16:20 GMT