Apache problems

Kevin

Can you run an MD5 check on the fog_0.32.tar.gz file? This will tell you instantly if you have a bad copy of FOG.

The MD5 should be: 45b323d4150690b9c1aa8288c33830c9

to do this type: [B]sudo apt-get install md5deep[/B]

Then just enter: [B]md5deep /path to your fog_0.32.tar.gz file [/B]If even off by 1 byte, that number will be completely different.

Adam Kohnert

Well I did what you said and here was the result:

fogclone@fogclone-OptiPlex-GX520:~$ md5deep /home/fogclone/Desktop/fog_0.32.tar.gz
45b323d4150690b9c1aa8288c33830c9 /home/fogclone/Desktop/fog_0.32.tar.gz

Then I tried installing FOG and this is what it shows:
Version: 0.32 Installer/Updater

This installation script should be run as
user “root”. You are currenly running
as fogclone.

Do you wish to continue? [N] y
What version of Linux would you like to run the installtion for?

      1) Redhat Based Linux (Fedora, CentOS)
      2) Ubuntu Based Linux (Kubuntu, Edubuntu)

Choice: [2]2

Starting Ubuntu Installtion.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
[url]http://www.fogproject.org/wiki/index.php?title=InstallationModes[/url]

What type of installation would you like to do? [N] n

What is the IP address to be used by this FOG Server? [10.0.179.207]10.0.175.162

Would you like to setup a router address for the DHCP server? [Y/n] y
What is the IP address to be used for the router on the DHCP server? [10.0.0.2]10.0.175.1

Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n] n

Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]n

Would you like to use the FOG server for dhcp service? [Y/n] n

DHCP will not be setup but you must setup your
current DHCP server to use FOG for pxe services.

On a Linux DHCP server you must set:
next-server

On a Windows DHCP server you must set:
option 066 & 067

This version of FOG has internationalization support, would
you like to install the additional language packs? [Y/n] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Fedora, or with sudo on Ubuntu.

Here are the settings FOG will use:
Distro: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.0.175.162
DHCP router Address: 10.0.175.1
DHCP DNS Address:
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password. If
you don’t leave it blank you will need to change
it in the config.php file located at:

/var/www/fog/commons/config.php

Press enter to acknowledge this message.

E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: perl
Installing package: libcrypt-passwdmd5-perl
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…Failed!
fogclone@fogclone-OptiPlex-GX520:~/Desktop/fog_0.32/bin$

Kevin

it still looks like it’s not liking the user account that you are running, that you don’t have elevated privileges. Also, are you installing/upgrading software when trying to install FOG?

E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)

That makes me think that something in Ubuntu is trying to update files as well at the same time, and Ubuntu definitely does not like that. But that could also point to a permission issue.

Do you receive the exact same errors from above when you run the command [B]sudo ./installfog.sh[/B]? Or do you still receive the same errors? i.e.

(
This installation script should be run as
user “root”. You are currenly running
as fogclone.

E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

Checking package: apache2…Failed!
)

If any of those are different if the command is running as sudo, it may give me a better idea of what’s breaking. If you are running it as sudo, then we may have to change the root password, just to try and see if something got messed up with that account.

Adam Kohnert

We are up and running, it seems i’m a little lack on reading directions… I ran it in “root” like it says to and it ran perfectly

Adam Kohnert

THANKS for all of the help, you people are life savers!!!

Kevin

Glad to hear you got it working.

Adam Kohnert

Well we ran into a problem!

It worked when I was in my office, then we moved to the LMC and attempted to grab an image from a computer and this is what we get:

[url=“/_imported_xf_attachments/0/237_2013-02-15 15.37.11.jpg?:”]2013-02-15 15.37.11.jpg[/url]

Kevin

It looks like you pointed FOG to use another DHCP server other than itself, at least from the config above. Is that correct? If you did, you need to specify options 66 and 67 in the DHCP scope of a Windows server. If you use a Linux server, you need to specify the next-server. If you receive a PXE-E32, it’s usually due to your machine not being able to contact the TFTP server due to it not being specified correctly on the DHCP server.

Adam Kohnert

I thought I set it up correctly

Here are some pictures[ATTACH=full]238[/ATTACH][ATTACH=full]239[/ATTACH]

[url=“/_imported_xf_attachments/0/238_2013-02-15 16.09.30.jpg?:”]2013-02-15 16.09.30.jpg[/url][url=“/_imported_xf_attachments/0/239_2013-02-15 16.03.37.jpg?:”]2013-02-15 16.03.37.jpg[/url]

Kevin

That all looks to be right. Try restarting the TFTP service on FOG [B]sudo service tftpd-hpa restart [/B]

Adam Kohnert

WOAH!!! LOOK!!![ATTACH=full]240[/ATTACH]

[url=“/_imported_xf_attachments/0/240_2013-02-15 16.27.16.jpg?:”]2013-02-15 16.27.16.jpg[/url]

Kevin

Glad to see you got the imaging working. Did restarting the service solve this issue, or did you need to change something else?

Adam Kohnert

Restarting the service worked perfect! Thanks for all the help

Kevin

Glad to hear you got it working.

Apache problems

186

11.6k

17.1k

154.6k