FOG 1.40 - Network traffic does not stop
-
Also, consider, the information used to determine the bandwidth rate was not very accurate in 1.4. In particular, the time span that was used was based on each cycle check. (2 minutes = 120 – at one second check time – obtains of information.) This, while seemingly correct, was highly inaccurate as the steps involved to send, obtain, process, and return the data often took more than 1 second to complete. So one iteration to the next may have spanned around 4-5 seconds (or more with many many nodes on the bandwidth chart). Why is this important? Well, imagine, nothing returned for the first iteration, and a change of 7000000 bytes in the next 4-5 seconds. This would represent a 1 second time of 7Mbps, where the actual span of time was likely around 7-8 seconds and likely around 1 Mbps or less.
Hopefully this gives some understanding.
-
When I disable the location plugin the network traffic stops.
Traffic started after I activated this plugin.
-
@wanderson The location plugin, by itself, doesn’t do any transmit/receive data. All it is is a way to tell hosts where to get information from. This can include init/bzImage, images, and snapins. So unless some of your machines are stuck in a boot loop trying to get data from one place to another and failing, this is unlikely the direct issue. But again, I still recommend updating from 1.4.0 to 1.5.4 as there may be many things that 1.4.0 has that are already addressed.
-
@tom-elliott, ok, I will upgrade to fog 1.5.4
-
@tom-elliott said in FOG 1.40 - Network traffic does not stop:
These are all transmit. If it were “chatter” it would likely be on the receive side
Consider also - the data returned from the FOG Server every time the FOG Client makes a request…
A very simple and non-technical change via the web gui for the client checkin time would either rule it out or identify it as the source. -
Is not he tall?
What can I do to reduce this traffic?
-
in less than 1 hour it transmits more than 1GB, it started after I put all the nodes in the same group and activated the localization plugin, until in version 1.5.4 it has the same problem
HELP PLEASE!!!
-
disable the plugin location and network traffic falls to 1mbps
-
Disable TRE-TO GROUP IS 35 NODES, TRAFFIC IS DOWN
-
created another group and linked to the 35 nodes, traffic was ceased
