Read your other thread:
[url]http://fogproject.org/forum/threads/slow-uploading-image-using-fog-server-1-1-1.10849/[/url]

[quote=“madskillz23, post: 30596, member: 8206”]Check the config on the web interface in FOG Configuration > Web Server > FOG_WEB_HOST and see if that IP adress is correct.

Otherwise check through the config file in /var/www/fog/commons/config.php

Those are good places to start.[/quote]

Thanks!
Turns out its located at /tftpboot/default.ipxe

[quote=“NickConrad, post: 30590, member: 24656”]I’m sure not! I’ll check right now.[/quote]

You are right as always: 127.0.1.1

Hello to all the problem is not resolved, but I re-installed a vm apparently my OS 14.04 LTS server was not really advisable after the official doc

So I redid a vm:

OS: Ubuntu 12.04
FOG Version: 0.32

I managed without too much trouble to install FOG, I can go to the web interface. I recorded a machine (IP + MAC address). Then I started a task to upload the image to the server, it puts “the started task” but nothing happens and if I reload the page it says mssage following error: “Unable to start task”

ping works well between the FOG server and the client machien (ubuntu 14.04 LTS)

Do you have any ideas? ^ ^

Thank you again for your help

Hi Junkhacker,
this solution works. Thank you for your quick help on this.
greetings from germany.

Ahh that makes perfect sense, My apologies for my misunderstanding the group structure. I will use the groups to assign the images and AD settings to the hosts then just multicast the images, I was purely trying it as I had to test an image on a couple of machines and told the guy just to quick image them as I was busy doing something else 🙂

As always thanks for your speedy replies Tom and for the continued work you guys are doing , donation incoming 🙂

Robbie

As a quick update I have added this into the wiki “How-To-Guides”
[url]http://www.fogproject.org/wiki/index.php/Windows_Storage_Node[/url]

It is all in svn now. I don’t know if it will work, but hopefully…

Ahh No worries, if I suspect it is a bug I’ll post there sorry.
I wasn’t sure if it was something I did on the install.

Cheers,

I should have known that. Thanks it fixed that issue.

Because of potential dangers that could happen while in debug we’ve removed this as a standard selection model. There two methods to still get debug though. First is to schedule a task as simply debug. This is probably easiest. Second method is to enable hidden menu and choose which key sequence you want to get back to menu. At boot it will ask for this key sequence. After pressing that key sequence you will receive a login prompt. Type in a valid fog GUI login and pass and it will display the menu with debug as we are all so used to. Hope this helps.

Just an update: We found that if we pull the AC power and the Network cable. Then plug back in, all works fine.

Thank you Tom, I will try and do that and see if I can get it by adding more CPU’s and more Memory.

Fog: 0.32
Os : ubuntu 12.04
-And the image that i’m capturing is have a free installed windows 7
-and i already installed tweak and apps that i needed

the size of my harddisk is 500Gb
-the total used on my hdd is 30Gb

When i always uploading image into my fog server the size of image is very large 190GB comparing on clonezilla 20GB+

Thanks sir Tom for helping me.

No success Tom. All of the Surface Pros have SSDs so I think those parts of the error logs are because the OS boots up immediately and the network devices lag behind.

I’ve seem to narrowed it down to the FOG client having a problem working in Windows 8.1 64 bit. I just tested the same thing with the FOG server and it works fine in Windows 7 32 bit. Even running the client as admin and in compatibility mode doesn’t fix the printer manager service is disabled issue.

[quote=“Bill Hasker, post: 30415, member: 24313”]Thanks Jaymes : I found the problem when I entered the time zone I didn’t notice It was also commented out . I did a clean install of 1310 Ubuntu and used 1.1.1 . My multicast still doe’s not work ,still hangs at partclone . What am I missing . the log says Task (18) Multicast group Quick deploy is no longer running .[/quote]

Try the latest revision, Tom has made some changes that have finally fixed some of the multicast issues.

[quote=“Tom Elliott, post: 30393, member: 7271”]Based on this is 192.168.1.1 the appropriate DNS Server for your setup?[/quote]

Yes

[quote=“Tom Elliott, post: 30393, member: 7271”]
Is this DNS Server a forwarder or just the DNS Masked from your router?[/quote]

I think it is just the DNS Masked from my router.

[quote=“Tom Elliott, post: 30393, member: 7271”]
Typically 192.168.1.1 is the Gateway address for home routers. This same gateway also translates to your ISP’s DNS Servers, or the DNS Server’s you’ve put in place to override your ISP’s DNS server. Why is this important to know? Most typically, the “Masking” of the DNS to your router’s gate is done via DNSMasq, the same protocol you’re trying to use to PXE boot your servers.

With that said, you could try commenting out the:
[code]port=0[/code]

You do this by making it:
[code]#port=0[/code]

Then restart the dnsmasq service.
[/quote]

This solved the problem.

Thank you very much!
Tob

Please see the following issue with possible fix for this issue.

This is being posted so all can try and see if this helps.

[url]https://github.com/mastacontrola/fogproject/issues/1[/url]

Thank you Tom for looking into it. I’ll update as soon as I can figure out why the database schema does not update … 😞 … see separate post here:

[url]http://fogproject.org/forum/threads/fog-error-access-web.10812/#post-30283[/url]