@jcabuco flash drive didn’t work for the 1040G3, but it did for the 1040G4.
What’s really confusing is that I pulled aside two 1040G3’s.
One of them is able to PXE boot and fully image with Secure Boot Off, UEFI On.
My guess is that there’s something within the BIOS of the 1040G3 that’s different from the other 1040G3. Ugh, at least I’m getting somewhere.
Hello, my organization recently moved into a new building. Originally we were on IP Addresses of 192.168.x.x and now we’re on 172.16.x.x
I edited the static IP address of my fog server by using sudo nano /etc/network/interfaces to reflect the new 172 address
I also went into my DNS and pointed my “fogserver” record to also point to the new 172 address. Is there anywhere else I need to update the record?
Currently when I attempt to PXE boot, it just hangs and cancels out.
I’m able to login to my fog server via a browser and I see this:
Weird, disregard. It just suddenly started working now. No idea what fixed it. Maybe it took a while for something to register.
Hello, I’m not able to reach my FoG webUI anymore. The only thing that I’m aware of that has changed was there was a reboot to the server over the weekend. I have already rebooted the fog server VM itself a few times.
I can ping my fogserver via IP along with using it’s host name.
C:\Users\jcabuco>ping fogserver
Pinging fogserver.bighen.us [192.168.0.60] with 32 bytes of data:
Reply from 192.168.0.60: bytes=32 time=3ms TTL=128
Reply from 192.168.0.60: bytes=32 time=2ms TTL=128
Reply from 192.168.0.60: bytes=32 time=1ms TTL=128
Reply from 192.168.0.60: bytes=32 time=2ms TTL=128
Ping statistics for 192.168.0.60:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 3ms, Average = 2ms
Is there some sort of service I should restart somewhere?
@george1421 I’ve got two videos for you. The BIOS Firmware on the problematic one is newer than the one where it works. I’ll try a rollback and see if that makes a difference. Anyways…
This is for the remaining problematic 1040G3
Video 1: https://drive.google.com/open?id=1OEeLrkW2I8FIqLh092IHH03-zAhcM8X6
This is me using the USB Bootable Flash Drive
Video 2: https://drive.google.com/open?id=1Uz4cCiQf00VymXMKCqfiA7VK5-KKP3xl
PXE Booting without the USB Bootable Flash Drive
@jcabuco flash drive didn’t work for the 1040G3, but it did for the 1040G4.
What’s really confusing is that I pulled aside two 1040G3’s.
One of them is able to PXE boot and fully image with Secure Boot Off, UEFI On.
My guess is that there’s something within the BIOS of the 1040G3 that’s different from the other 1040G3. Ugh, at least I’m getting somewhere.
@george1421 thanks, giving that a shot.
@george1421 was able to create the USB Bootable no problem, but it fails saying no configuration methods succeeded:(
Guess I have to hunt down a different ethernet adapter? I’m just confused as to why it gets detected when Secure Boot is enabled.
@george1421 said in PXE: No Network Option w/UEFI & Secure Boot Turned Off:
https://forums.fogproject.org/topic/6350/usb-boot-uefi-client-into-fog-menu-easy-way
Is following https://forums.fogproject.org/topic/6350/usb-boot-uefi-client-into-fog-menu-easy-way the same as following: https://wiki.fogproject.org/wiki/index.php?title=USB_Bootable_Media ?
@george1421 Where is FOS’s supported hardware list?
I also tried building this: https://wiki.fogproject.org/wiki/index.php?title=USB_Bootable_Media
It loads iPXE, but then doesn’t receive an IP Address and just fails. Network Cable via USB Adapter is plugged in, but I assume it’s because I don’t have a certified adapter?