@Tom-Elliott

No worries, all the help is appriciated!

@Tom-Elliott

Please know that my raid only contains the OS which is 20GB and the rest is empty space.
Where should i put the postinit script?

@george1421 I have read so many forum posts including the one you mentioned
The thing is i do not make a raid over the whole disks, just a part of the this, whereas i want all the partitons to be cloned.

So do i need to use /dev/md127 as primary drive? or what should i do to capture both drives in the system completely?

I am still unable to capture the disks with setting /dev/md127 as primary disk.

Hi all!

I can’t capture an image on debian 12 with a raid1 configuration via software configuration.

I have tried so many things and searched so many forums including setting mdraid=true on the host and setting primary disk on /dev/md127 as it showed in the debug terminal.

also setting the mdraid=true in fogsettings did not make any diffrence, keep getting the same issue:

This is currently a virtualmachine as it is easier for me to test with.
I have changed the disks from VirtiO to sata and scsi but nothing made any diffrence.

Any ideas?