@Sebastian-Roth

I went ahead and reran the fog installer.

That seems to have fixed it. I would have to say it most likely didnt finish last time. But since im a noob i dont really know what to look for. lol.

both legacy and uefi boot to pxe now.

@george1421 @Wayne-Workman

Here is the output.pcap file.

output.pcap

@Sebastian-Roth @Tom-Elliott @Wayne-Workman @george1421

I want to thank you guys for all the assistance.

@Sebastian-Roth @Tom-Elliott @Wayne-Workman @george1421

I want to thank you guys for all the assistance.

@Sebastian-Roth

I went ahead and reran the fog installer.

That seems to have fixed it. I would have to say it most likely didnt finish last time. But since im a noob i dont really know what to look for. lol.

both legacy and uefi boot to pxe now.

@Sebastian-Roth

I will give that a try. I dont really remember. As far as I know the install should have completed. When I try to run this command from that tftp troubleshooting page. I get this.

Doesn’t look like i have a folder called tftpboot.

When you say rerun the installer are you talking about fog?

@Sebastian-Roth

@Tom-Elliott

I followed the guide to install tftp and this is what i get.

@Sebastian-Roth

So i started xinetd.

Iooks like i get the same error as before. so seems something is wrong with tftp

@Sebastian-Roth

@george1421

192.168.1.3 is the fog server.

for output.pcap i did run that from the fog server and it was before i disabled firewalld.

output2.pcap is after disabling firewalld.

this is what i get with those two commands.

@george1421

here is the updated pcap file.

0_1543078114945_output2.pcap

@Wayne-Workman said in Cant pxe boot to fog.:

sestatus

i disabled firewalld i assume that is different than selinux?

@george1421 @Wayne-Workman

So I got a update. Seems I’m getting more action after disabling the firewall on fog.

vm 1 with legacy boot gives me this now.

vm 2 with uefi boot gives me this.

the laptop gives me the same error as the first picture.